SH-1 in term of weight of moulding powders, and no other curing agent is needed. Follow the processing steps of moulding powders mixing with former curing agent.
按电玉粉重量计，在搅和机中加入0.3~0.4%，所有原来其他的固化剂都不必加入，原来的生产工艺条件不变。
Curing agent for thermosetting powder coatings.
热固性粉末涂料固化剂。
This kind of resin composite manhole cover with glass fiber and resin as the basic material, curing agent, accelerator as auxiliary material.
这种树脂复合型井盖以玻璃纤维和树脂为基本材料，以固化剂、促进剂等为辅助材料制成。
The relations between the time of surface drying and the quantity of curing agent was established.
测定了固化剂用量与涂膜表干时间的关系，表干时间随固化剂用量的增多而减短。
This paper concisely introduced the effects of the choice of curing agent, the flexibilizer quality and the active filler on the mechanical properties of the adhesive.
简要介绍了固化剂的选择、不同增韧剂的优劣及活性填料等材料对胶粘剂力学性能的影响。
Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.
通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。
As for curing process, the influence of dosage of curing agent and curing temperature on gel time was investigated.
在固化工艺方面，研究了固化剂含量和固化温度对于凝胶时间的影响。
In this paper some parallel tests are done between cement and HS soft soil stabilizer which is compound of cement and 10% curing agent.
对在水泥中加入10%的固化素，复合而成的HS软土固化剂性能与水泥进行了对比研究。
The free toluene diisocyanate(TDI) in the curing agent TDI-TMP(Trimethylol Propane) of polyurethane was separated in laboratory by means of high-vacuum two-stage thin-film evaporation.
在采用高真空两级薄膜蒸发分离甲苯二异氰酸酯（TDI）-三羟甲基丙烷（TMP）聚氨酯固化剂中游离TDI的实验研究基础上，进行了中试研究。
In the preparation of conductive paints of epoxy resin filled with copper powders the reaction between the curing agent and copper was studied in detail by means of SEM and IR.
利用IR、SEM等手段，较详细地研究了铜粉—环氧树脂体系中固化剂与铜粉的相互作用，并探讨了铜粉用量、形状对涂料导电性能的影响规律。
Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.
微胶囊型固化剂，其制备方法，热固性树脂组合物，预浸渍物及纤维增强的复合材料。
The energetic curing agent C has good physical compatiblity with GAP.
合成的含能固化剂与GAP有良好的物理相容性。
The results showed that the new curing agent has good stability at room temperature and improved curing performance.
初步固化实验结果表明，这种环氧树脂潜伏性固化剂具有较好的固化性能。
Curing agent named Hardener NP was synthesized in laboratory, it was suitable for curing epoxy resins as well as phenolic resins, with higher reactive rate.
本文研究一种环氧-酚醛胶粘剂的高效固化剂np，该固化剂与环氧、酚醛这两种树脂，均具有较高的反应活性。
In this paper the effect of size of silver particles, proportion, curing agent and curing condition on epoxy resin - low - molecular polyamide - silver particles system are studied and discussed.
本文着重从银粉的粒度、添加量和固化剂的种类、用量以及固化条件等方面研究和探讨了环氧-低分子聚酰胺-银粉导电胶体系的导电性及强度。
The important effects of microencapsulated coating of the curing agent and oxidizer and preparation of composite particles to improve the properties of solid propellants are also showed.
重点指出固化剂和氧化剂的微胶囊化包覆、复合粒子的制备等对提高推进剂的性能有重要作用。
The influence of pigment to varnish base ratio and the ratio of epoxy resin to curing agent on film's performance were studied.
研究了涂料中颜基比、固化剂与环氧树脂的当量比等对涂膜性能的影响。
The soft mica plate, with MR 46 as adhesive and cured by special curing agent, has good moisture resistance and flexibility.
MR—46与专用固化剂配合使用，制成的云母板具有良好的防潮性、柔韧性。
Properly adjusting the process of adhesive mixing, modifying the type and dosage of the curing agent could successfully solve this problem.
通过改进调胶工艺，调整固化剂类型与用量，可以有效解决此问题。
Advance on the curing agent of UF resin was reviewed, included properties of UF resin, curing theory, types and selection for curing agent of UF resin.
叙述了UF树脂固化剂研究进展，包括UF树脂性质、UF树脂固化理论以及UF树脂固化剂种类和合理的选择固化剂。
The influence of the epoxy resin, curing agent, pigments and fillers, solvents, additives, thickness of the coating film and et al on the performances thereof is discussed.
讨论了环氧树脂、固化剂、颜填料、溶剂、助剂、涂膜厚度等对涂膜性能的影响。
Through applying a liquid modified aromatic amine as curing agent for epoxy resin, a high performance resin matrix system for resin transfer moulding (RTM) was derived.
选用一种液体改性芳香胺为环氧树脂的固化剂，得到了一种适合于树脂传递模塑(rtm)的高性能树脂体系。
It is mostly used as binder and curing agent in the production of hi-temp refractory materials for kiln.
主要用于高温窑炉耐火材料的粘结剂和固化剂。
Using lead benzoxy as curing agent, cured epoxy resin was analyzed by means of IR spectrum and DSC curves. Lead benzoxy was considered to be catalytic curing agent.
采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。
The result shows: the resistivity, anti-corrosion and chemical resistance of the film from arylated alkyl amine curing agent were better than that of conventional polyamide curing agent.
指出浅色环氧防静电涂料选用芳脂胺类型的固化剂，所得漆膜的电阻率、防腐蚀性和耐化学品性均优于传统的聚酰胺固化剂。
And the influence of re resin, curing agent and various fillers on the putty properties are discussed in detail.
并对re树脂、固化剂及各种填料对胶粘剂性能的影响进行了较详细的论述。
Therefore it becomes a tendency to develop nonionic type waterborne epoxy curing agent.
开发非离子型水性环氧固化剂是其发展趋势之一。
And innovatively adopting sulfur as the curing agent of epoxy and deeply studying on the double-curing behavior, curing mechanism and the cooperating effect of sulfur and other curing agent.
同时创新性的发现并采用硫磺作为该环氧树脂的固化剂，并对该体系的双固化特性、固化机理及硫磺与其它固化剂的复配效果进行了深入的研究。
The cathodic electrophoretic coating of epoxy resin was prepared with half blocked isocyanate as curing agent.
在此采用半封闭的甲苯二异氰酸酯作为固化剂制得了环氧树脂阴极电泳涂料。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
应用推荐