This method can reduce Labour intensity, improve working efficiency and ensure the deburring effect of Cu alloy part.
这种方法能降低劳动强度，提高工作效率，较好地保证铜合金零件抛光去毛刺效果。
Cu and Pb ions in the alloy plating bath and composition of its deposits.
此法已被成功应用于测定锡-铜-铅合金电镀液及其镀层中的锡、铜和铅。
By microstructure analysis the evolutive characteristic of structure of rapidly solidified Cu Zn alloy in different temperature preservation was initially made clear.
通过金相组织分析，初步摸清铜锌合金快速凝固组织在不同温度下保温组织演变的特点。
The electrical conductivity, hardness and mechanical properties of Cr Cu alloy in various heat treatment states are tested and its properties and microstructure variations are analyzed.
测试了高导电铬铜合金在各种热处理状态的导电率、硬度和力学性能，并分析了性能变化及金相组织。
The mechanism of deburring, the formulation for processing, technical parameters of Cu alloy by using electrochemistry, and the points for attention in operating are introduced.
介绍了铜合金零件电化学去毛刺机理、工艺配方、工艺参数和操作注意事项。
Selected principles of strengthening phase of dispersion strengthening Cu alloy and its application prospect were discussed.
讨论了弥散强化铜合金强化相的选择原则，以及此合金的应用前景。
The results show that the sintering temperature decreases and the alloy grain is spheroidized and is refined with the increase of Ni and Cu or the ratio of Ni to Cu.
结果发现，随镍铜量或镍铜比的增加，烧结温度下降，合金的晶粒球化、细化。
Influence of trace elements and thermomechanical treatment on fatigue performance of Cu based elastic alloy has been investigated.
结果表明：铜基弹性合金通过多元少量微合金化与形变热处理工艺相配合，能显著提高材料的疲劳性能。
Procedure rules and fundamental principle of surface colouring of Cu and Cu alloy are investigated. Chemical reactive mechanism of surface colouring of Cu and Cu alloy is probed also.
研究铜及其合金的表面着色过程的规律和基本原理，对铜及其合金表面着色的化学反应机理也进行了相应的探讨。
Tools for forge machine, die insert, extrusion mould for Cu alloy, hot shearing knives.
平锻机上的凸、凹模，铜合金挤压模，镶块，高温工作下的热剪切刀。
Features and shortcomings of five popular formulas for calculating pouring time in al, cu alloy casting product are described. Every formula's shortcoming in its material range is analyzed.
重点阐述了铝、铜合金铸件生产中较常应用的五种浇注时间计算公式的特点和存在的不足，分析了这几种公式在各自的材质铸件使用范围内出现的缺点及不足。
In this paper, the relation between the properties of the new Be-Ni-Cu alloy containing a small amount of re and Mg element and the different heat treatment process and cold work.
研究了不同热处理工艺、冷变形量与含有微量稀土元素和镁的新型低铍低镍铜合金性能的关系。
The alloy with 3% Cu had the best comprehensive mechanical properties.
当铜含量为3%时，合金具有最好的综合力学性能。
Counter-flow spray technique for the treatment of the rinsing water containing pyrophosphates in Cu- Sn-Ni alloy plating is described.
电镀焦磷酸盐铜锡镍废水由“常流水”清洗方式改为反喷淋清洗方式。
The effect of cooling regime after solid solution and aging treatment on hardness, electrical conductivity and impact toughness was investigated for Cu-Ni-Be alloy.
本文研究了固溶时效后不同冷却方法对铜镍铍合金的硬度、电导率和冲击韧性的影响。
This paper introduces the performance, applications and existing producing methods of Cu- Cr alloy.
介绍了铜铬合金的性能、应用及该材料现有的制备方法。
Cold deformation and heat treatment have been studied through testing mechanical property and conductivity of Cu-Cr alloy, and strengthening mechanism has been presented in the paper.
通过测试力学性能和导电性能，对铜铬合金进行了冷变形及退火工艺的探索，并进行了强化机理分析。
Thereby, Cu-Ag alloy prpeared by Ohno continuous casting is a new material with better wear resistance.
因此，通过热型连续定向凝固技术生产的铜银合金是一种耐磨性较好的新材料。
The recent developments of high temperature Cu-based shape memory alloy are reviewed.
本文概述了高温铜基形状记忆合金的最新研究进展。
The modifying experiments on hypereutectic Al - Si alloy were made by addition of sodium flux and P - Cu alloy.
用磷铜合金和四元钠盐变质剂对过共晶铝硅合金进行了变质处理试验。
Al-Cu alloy is widely used in aeronautical and space aerocraft light armor vehicle and some parts of automobile owing to its excellent high temperature and super-low temperature mechanical properties.
铝铜合金具有良好的高温和超低温性能，而广泛应用于航空航天飞行器、轻型装甲以及汽车的某些零部件等民用领域。
The visible spectrum characteristics of the copper matrix and component in Cu-based alloy were(studied) with computerized digital simulation processing technique.
对铜合金可见光谱线进行了计算机数字模拟处理，研究了基体元素铜和各成分元素的可见光谱特征。
The results showed that sulphur and re can refine the microstructure of Cu-Pb alloy, but its fatigue strength decreases with the increase of sulphur, and increases with re.
结果表明，硫和稀土都能使铜铅合金组织细化，但硫降低其疲劳性能，而稀土能提高其疲劳性能。
According to the liquid separation property of Cu-base alloy, the Cu-base coating is obtained on the aluminum alloy by CO2 laser cladding for improving the surface strength of aluminum alloy.
为了提高铝合金的表面强度，根据铜合金的液相分离性质，采用CO2激光熔覆方法在铝合金表面成功制备了铜基合金涂层。
Nanostructured bulk of W-Cu alloy was prepared by mechanical alloying and hot pressed sintering.
在真空电炉中利用机械合金化和热压烧结法制备出纳米晶块体钨铜合金。
The casting properties of high strength Aluminum alloy ZL205A and the casting technology of complex Al Cu alloy stand casting were studied.
介绍高强ZL2 0 5A合金铸造特性，分析高强复杂铝铜合金支座铸件结构特点和工艺特性及支座铸件铸造工艺。
In this paper, the corrosion behavior of RE-Ni-Cu and Cu-Ni alloy cast iron in the caustic lye of soda was researched.
本文对稀土镍铜合金铸铁和铜镍合金铸铁在烧碱液中的腐蚀行为进行了系统的研究。
The effect of heat treatment on electrical conductivity of Cu based multi-component alloy was studied by metallographic microscope, TEM, SEM/EDS, XRD and conductance instrument.
借助金相显微镜、TEM、SEM/EDS、XRD及电导仪研究了热处理对铜基多元合金导电性能的影响。
In order to improve the mechanical properties of die cast aluminum alloy, trials of study on die cast and heat treatment of Al-Cu alloy which is of high strength and ductility have been carried out.
为了弥补目前压铸铝合金强韧性不足，进行了高强韧铝铜系合金的压铸及热处理的试探性研究。
应用推荐