Study on the crystallization properties and morphological structure of cationic dyeable polypropylene fibers;
应用组织学方法观察了雌性空怀双峰驼生殖道的形态结构。
The improvement of crystallization properties can by realized by the ordered arrangement of long alkyl chains.
超支化聚合物的结晶能力由于长链端烷烃的有序排列而得到明显提高。
The crystallization properties of fluxes were studied by a single hot thermocouple in order to understand the crystalline state of flux film.
为了解结晶器与坯壳间渣膜的结晶状态，用热丝法熔化性能测定仪对保护渣结晶性能进行研究。
The co precipitation behavior and the effects of impurity ions on the crystallization properties of yttrium base heavy rare earth carbonate were investigated.
本文对钇基重稀土碳酸盐沉淀过程中杂质铁、铝离子的共沉淀行为以及对碳酸稀土的结晶性能和结晶效果的影响进行了研究。
DSC, XRD, DMA and other testing methods were used to study the crystallization properties, dynamic mechanical properties of different polymer with carbon fiber.
运用DSC、XRD、DMA等测试手段，研究了对于不同树脂基体，碳纤维对基体的结晶性能、动态力学性能等的影响。
PTT blend toughened by POE and POE-g-MAH were prepared by melting blending, and the morphology, crystallization properties and mechanical properties were studied.
通过熔融共混制备了POE及其马来酸酐接枝物增韧PTT 共混物，研究了增韧PTT共混物的结晶性能、力学性能和形态。
DSC, WAXD, POM were performed to study the compatibility, crystallization structures, crystallization properties, crystallinity and crystal morphologies of the blends.
通过DSC、WAXD和POM研究了PTT、PBT共混物在非等温条件下的相容性、结晶结构、结晶性能、结晶度及晶体形态。
The material has better crystallization properties, processing performance and improved mechanical property owing to the existence of the high molecular weight component.
该类材料由于高分子量组份的存在，具有更好的结晶特性及加工性能，力学性能也有所提高。
The characteristic groups of polymeric pour point depressant(PPD)were analyzed by FT-IR and NMR techniques. The crystallization properties of various types of wax and PPD were measured by XRD.
采用红外光谱仪、 核磁共振波谱仪对聚合物的合成特征基团进行了表征，并采用X射线衍射仪对不同型号蜡及降凝剂的结晶性能进行了分析测试。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The content of crosslinking agent and its effect on the structure of filaments, crystallization characteristics and mechanical properties relating to elastic recovery were discussed.
并对交联剂用量、交联剂对纤维结构、结晶性能以及与弹性回复率相关的力学性能的影响进行了讨论。
The effect of grafting on the crystallization and dynamic mechanical properties of PP have also been investigated by the determination of the crystallization rate and dynamic mechanical loss.
通过测定结晶速率和动态力学损耗的方法研究了接枝对聚丙烯的结晶行为和动态力学性质的影响。
The mechanical properties, rheological behaviors, crystallization characteristics of several PP speciality compounds for medical articles were studied.
研究了几种医用聚丙烯专用料的力学性能、流变性能、结晶特性及其熔融特性。
The properties of target and the structure, crystallization kinetics and optical property of film were analyzed particularly.
对靶材的组织与性能，薄膜的结构、结晶动力学及光学性质进行系统的测试分析。
Poly (butylene terephthalate) -layered silicate (LS) nanocomposites (NPBT) were prepared, and their crystallization, nucleation and their structure-properties were investigated.
制备了聚对苯二甲酸丁二醇酯-层状硅酸盐(LS)纳米复合材料(NPBT)，并研究了它的结晶特性。
The crystallinity of PLA has great influence on its mechanical properties and degradation rate, so the crystallization behavior of PLA has also attracted many researchers to widely research.
聚乳酸的结晶性能对其力学性能和降解速率有着重要的影响，因而其结晶行为也逐渐成为人们研究的热点。
The mechanical properties of thermoplastic rubber depended on the content of PE and, to a lesser extent, on the crystallinity and perfection of crystallization.
热塑橡胶力学性质依赖于聚乙烯含量，同时，它与聚乙烯的结晶度及结晶完善程度有关。
A kind of PET/GF composite with good mechanical properties and rapid crystallization rate was prepared.
制备了结晶速率快、力学性能优异的玻纤增强聚对苯二甲酸乙二酯（PET/GF）。
At the same time, the application of crystallization technology in controlling particle morphology, improving compression and delivery properties is introduced also.
同时介绍了结晶技术在药物晶型控制、压缩性能和释放性能改进方面的应用。
Researchers are seeking to define the proper water temperature, pressure, and flow rate, as well as the effect of internal water quenching on resin crystallization and molded part properties.
研究人员正在试图确定水温、流量、零件腔内水的冷却作用对树脂结晶和注射件性能的影响。
The thermal properties and crystallization behaviors were studied by means of differential scanning calorimetry (DSC), thermogravimetry (TG) and polarizing optical microscopy (POM), respectively.
用示差热分析（DSC），热重分析（TG）和偏光显微镜（POM）研究了材料的热性能和结晶行为。
The crystallization temperature and dielectric properties of PLZT thin films with PLT seeding layers were investigated.
研究了有晶种层的PLZT薄膜的结晶温度及介电性能。
Compositions, crystallization mechanisms and properties of the fluosilicate glass ceramics were investigated in this paper.
本文主要研究了氟硅酸盐微晶玻璃的组成、晶化机理和性能三个方面的内容。
Impact of composition upon the cold flow properties for biodiesel was investigated by molecular structure, solution crystallization theory and similarity-intermiscibility theory.
在分析生物柴油分子结构的基础上，应用色-质联用仪、低温性能测试仪、溶液结晶原理和相似相溶原理研究生物柴油的低温流动性。
The crystallization kinetics model is established by using a random two-phase anisotropy film. The influences of RRTA parameters on magnetic and electric properties of soft-magnetic are studied.
首次从无规双相各向异性模型和快速循环退火法两方面入手，建立了RRTA纳米晶化动力学模型，给出了软磁薄膜的磁电性能与纳米晶化工艺的关系。
With the properties of avoiding deliquescence and crystallization, the whole sugar powder can be applied extensively in food industry instead of part of cane sugar or starch syrup.
葡萄糖全糖粉具有不返潮、不结晶析出等特点，在食品工业中可代替部分蔗糖与淀粉糖浆。
The inclusion of at into polymer matrix improved the mechanical properties, crystallization behavior, and heat resistance of the composites, however, the effectiveness varied upon different systems.
AT使聚合物基体的力学性能、结晶学性能和耐热性能都有改善；但是不同体系的力学性能改善程度不同，AT可用作聚合物的有效的成核剂。
Thermal properties, degree of crystallization and morphology of UHMWPE fiber were analysed by DSC, DMA, X-ray and SEM.
用DSC、DMA、X-射线衍射及SEM分析了纤维的热力学性能、结晶情况及纤维的表观形貌。
The influence of crystallization behavior on mechanical properties of the composites was analyzed.
分析了结晶行为对复合材料力学性能的影响。
The influence of crystallization behavior on mechanical properties of the composites was analyzed.
分析了结晶行为对复合材料力学性能的影响。
应用推荐