• A frame of the commercial vehicle comprises a front cross-member (2) for the connection of two longitudinal-members (3).

    商用汽车的车架,包括用于连接两个纵梁(3)的前横梁(2)。

    youdao

  • Analysis and explorations are made to the rupture phenomena of te first cross member in SH6700 light bus floor. 3-structure improvement plans are put forward on the basis.

    针对SH6700轻型客车地板第一横梁的断裂现象进行了分析和探讨,在此基础上提出了三种结构改进方案。

    youdao

  • In order to ensure the normal operation of traffic in construction the continuous box beam 's construction adopts cross beam as supporting system and Bailey member bars as abutments.

    为保证在施工期间的交通正常运行,连续梁的施工特采取贝雷杆件组拼支墩和横梁作为支撑系统。

    youdao

  • Before each build, team member from cross function department should sign off in readiness sheet to confirm status of each function.

    在每次生产前,项目成员应当在准备就绪表上签名确认各职能部门准备的状态。

    youdao

  • Install cross member and diagonal braces.

    安装横梁和对角撑杆。

    youdao

  • Meanwhile, the cross member also employs diversified structures which enable the standard and luxury model frame have less deadweight, whereas the economic frame model has more load-carrying capacity.

    同时横梁也采用了不同的结构形式,使标准型和豪华型车架具有较轻的自重,经济型车架具有更强的装载能力。

    youdao

  • Loosen trailing arm on front-axle cross member and pull out of the mount.

    松开前轴横梁上的拖臂并从支座中拔出。

    youdao

  • Feed the belt strap in direction of arrow around the roll cage cross member into the adjustable slider.

    将安全带按箭头方向绕着防滚翻保护架横梁穿入调节滑块。

    youdao

  • The tractor frame uses super-long fifth-wheel pick-up plate as well as plate reinforced cross member.

    牵引车车架采用了超长的鞍座连接板及连接板加强横梁。

    youdao

  • Based on the academic analysis, a biaxial bending member is equivalent to a single bending member by the rule of equivalent cross section.

    在分析大量文献资料的基础上,采用“等效截面”将双向受弯构件转化为单向受弯构件。

    youdao

  • The experimental study of steel structural member with a new type of cross section is presented.

    主要介绍了一种新型截面的钢结构构件的试验分析。

    youdao

  • The type of bar can be selected according to cross section area, performance of the member.

    型钢可以根据构件截面的大小、受力特点,灵活地选用。

    youdao

  • In order to avoid a singular solution, we keep the dimension of the truss for a given topology unchanged by giving the truss member to be removed a tiny cross-sectional area.

    为了避免结果奇异,在优化过程中,给被删去的构件一个微小的截面积,使一个给定的拓扑组的结构维数保持不变。

    youdao

  • Using the conception of equivalent cross-section, the formula of elastic carrying capacity at the larger end of the tapered member is suggested.

    采用楔形构件等效截面特性的概念,结合我国规范推导出以大头截面为计算截面的受弯稳定性计算公式;

    youdao

  • To give the formula of cross-section capacity in eccentric compression, the theoretical model of composite member and judgment method of large or small eccentric compression have been brought forward.

    目的确定组合构件的理论模型和大小偏心的判断方法,提出偏心受压正截面承载力公式。

    youdao

  • Steel-concrete composite beam with high capacity, good ductility, stiffness, member cross-section the advantages of small size.

    钢-混凝土组合梁具有承载力高、延性好、刚度大、构件截面尺寸小等优点。

    youdao

  • Taking the lateral displacement of the cross section and the longitudinal displacement of nodes as the basic variables the finite element analysis of thin-walled member structures is formulated.

    导出以截面横向位移和节点纵向位移为未知量的有限元法的基本方程。

    youdao

  • The IMF's 24-member steering committee concluded that 'while each country's situation is different, coherent action must be taken, taking due account of cross-border interactions.

    IMF管理委员会作出如下决定:虽然各国的情况各不相同,但必须采取一致行动,并充分考虑到国与国之间的互动。IMF管理委员会由24名执行董事组成。

    youdao

  • The power input rotary member and the power output rotary member contact respective slanting section of one of the slanting portions with V-shaped cross section.

    动力输入构件和动力输出构件分别与该弹簧座的具有V形截面的倾斜部分之一相接触。

    youdao

  • A linear function is used to express the warping displacements along the cross section of the thin-walled member.

    本方法采用线性函数作为横截面翘曲位移的插值函数,适用于任意横截面形状和任意边界条件的薄壁杆件。

    youdao

  • The main content of this thesis is lateral buckling analysis of thin-walled structures with irregular cross section by transformed 63 spline finite member element method.

    本文主要分析了具有不规则横截面形状的薄壁结构在横向荷载下的稳定问题。

    youdao

  • The proposed method is applicable for the thin-walled member of any cross section with any boundary condition.

    本方法适用于任意横截面形状和任意边界条件的薄壁杆件。

    youdao

  • Then the unified formulas for calculating sectional strength of the member are derived which are adaptable to both circular or ring cross section with thrust of big or small eccentricity.

    最终导出了大、小偏心统一,圆、环形截面统一的正截面强度计算公式及方法。

    youdao

  • Then the unified formulas for calculating sectional strength of the member are derived which are adaptable to both circular or ring cross section with thrust of big or small eccentricity.

    最终导出了大、小偏心统一,圆、环形截面统一的正截面强度计算公式及方法。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定