Faced with major domestic and foreign customers, acceptance of the auto cover die seized fixture design drawings, and related technology support, technical services business.
主要面对国内外客户，接受各汽车覆盖件模检夹具设计图纸工作，及相关技术支持，技术服务等业务。
In principle, any old trees would do—although they die and rot, more forest cover would lock up more carbon dioxide.
从理论上说，任何成木都能做到这一点，尽管它们也会枯萎腐烂，但是更大的森林覆盖将会锁住更多 的二氧化碳。
This remote controler front cover of DVD molding die must include special slide pull structure because the structure of the product.
本次设计的是DVD遥控器前盖塑料模具，制件的结构决定了该模具必须同时使用侧抽芯。
The cold stamping technology and die of two size range of dust cover were compared, there were some guidance roles on production.
对两种尺寸范围的防尘盖的冷冲压工艺及模具进行了对比分析，对生产具有一定指导作用。
Through the introduction of the frame and function of CAPP system about die of automobile cover parts, bring forward some questions when exploiting the system.
介绍了汽车覆盖件模具CAPP系统的功能和结构，提出了在开发模具CAPP系统中需要注意的一些问题。
The forming technology of balance weight cover of fork truck is analyzed. Die structure and working part design is also introduced.
分析了叉车平衡重后盖的成形工艺，介绍了模具结构及主要工作部分的设计。
According to the side cover structure characteristics of table model computer box, determined the progressive die and the single operation die.
根据台式电脑机箱侧盖的结构特性，确定了级进模与单工序模相结合的工艺方案。
A drawing process for sealing cover of automobile connecting rod and a method of chamfering by punching were analyzed. The die structures designed for the key procedures were introduced.
分析了汽车连杆油封盖拉伸工艺及用冲压成形完成倒角的方法，介绍了关键工位的模具结构。
The die of automobile cover panel is one of the most important equipments of the development of automobile industry.
汽车覆盖件模具作为汽车开发生产的重要工艺装备，其设计速度和质量直接影响着汽车的开发周期和质量。
The porthole cover forming technology has been analysed and theoretical calculation and simulation verification have been done hence scheme of forming technology and die design done.
分析了装货口盖成形工艺性，并进行了理论计算和模拟验证，由此制定了该工件的成形工艺、模具设计方案。
An evaluation system for the surface quality of magnesium alloy die castings was established based on an automobile cylinder head cover component.
建立了一套汽车发动机缸盖罩盖镁合金压铸件外观质量的评定系统。
Basically what this means is that you'll receive immediate payout of your cover in the event your doctor diagnoses an illness that likely will cause you to die within a year.
基本上这意味着什么，是你会得到即时支付你的封面，在发生你的医生诊断的疾病有可能会导致你死在一个年度。
By bulging forming technology analysis of color kinescope shaded cover, die structure and main parts designs are introduced. Punch surface shape is also designed by surface equations.
对彩管荫罩零件进行张拉成形工艺分析，介绍了模具结构及主要零件设计，并运用曲面方程进行凸模曲面形状设计。
Analyzed the forming process of the cover plate, introduced the layout design, and expound design and manufacture process of die structure and its main components.
分析了盖板零件的冲压成形工艺，介绍了零件排样设计方案，阐述了模具结构及其主要零件的设计和制造工艺。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
As styling method of compound curved surface has been widely used in die surface styling, it possesses a very important position in surface styling of motor vehicle body cover panels.
由于混合曲面的造型方法在模具表面的造型中广泛采用，从而使混合曲面的造型方法在汽车覆盖件表面造型中占有很重要的地位。
It's pressing flow is confirmed by analyzing pressing technology of 42 inch plasma color TV's back cover, and expounding drawing die structure design of back cover and it's working process.
通过对4 2寸等离子彩电后盖的冲压工艺分析，确定了该制件的冲压工艺流程，阐述了后盖的拉伸模具结构设计及工作过程。
Based on analyzing die casting process of cover part, the authors discuss the main points of the design of die casting mould.
在分析端盖零件压铸工艺的基础上，论述了压铸模的设计要点。
Mainly introduced the detailed structure and working process and the technology analysis of the blanking-drawing-extruding compound die for the stainless steel whistle pot cover.
主要介绍了不锈钢球形响壶盖的落料、拉伸、挤边复合模的详细结构、模具工作过程、工艺分析。
Then the blaze had arrived and the heat had scorched her small body, the mother had remained steadfast…because she had been willing to die, so those under the cover of her wings would live.
于是，火焰终于烧到了，高温将她小小的身躯烧焦，但她一直保持不动…因为她已经决定去死，这样至少可以让她羽翼下面的孩子们活下来。
Graduation is this cold stamping die design issues for the next Cover incision bending dies die processes by bevelled punching and bending components.
此次毕业设计属于冷冲压模具，冲压模具课程设计设计课题为下端盖切口弯曲模具，模具工序由斜刃冲裁和弯曲组成。
By bulging forming technology analysis of color kinescope shaded cover, die structure and main parts designs are introduced.
对彩管荫罩零件进行张拉成形工艺分析，介绍了模具结构及主要零件设计，并运用曲面方程进行凸模曲面形状设计。
With the construction of the electrode cover and the actual circumstance of the production equipmentses, practical the Multi-Position progressive die was designed.
针对电极罩的结构及生产设备的实际情况，设计了实用的多工位级进模。
The manufacturability of a fixing cover with flange seal was analyzed. The general structural design and layout scheme of a progressive die for the cover were presented in detail.
分析了带凸缘密封固定盖的工艺性，介绍了级进模总体设计结构和排样设计。
Taking the top cover for example combining debugging method commonly used in drawing die, found some special debugging method.
以某车型顶盖为例结合拉伸模的常用调试方法，在顶盖类拉伸模的调试过程中找到了一些较为特别的调试方法。
The paper analyses the difficulty of bearing seal up cover stamping process and deals with the effective process measures and the key points of die designing.
分析了密封罩零件冲压成形的难点，论述了采取的有效工艺措施和模具设计要点。
The paper analyses the difficulty of bearing seal up cover stamping process and deals with the effective process measures and the key points of die designing.
分析了密封罩零件冲压成形的难点，论述了采取的有效工艺措施和模具设计要点。
应用推荐