Peter drove jerkily, cornering too fast and fumbling the gears.
彼得开车很不平稳，转弯太快，换档也不熟练。
They are not cornering the commodity, as the Hunt brothers from Texas attempted to do with silver in the late 1970s.
他们也并没有囤积大宗商品，就像1970年末，来自德克萨斯州的Hunt兄弟试图炒白银一样。
Now it was the weapons of finance that he used, cornering shares and launching blistering bear raids to beat off equally merciless rivals.
这一次他用的是金融武器：垄断股价，实行猛烈快速的“空头袭击”策略打退同样冷酷的竞争对手。
But markets for commodities are global, and the risk of any one consumer cornering supplies, or securing them at a lower price, is negligible.
但是，日用品市场是全球性市场，任何一方都不可能将全球原料供应品据为己有，也不可能以较低的价格得到它们。
Tire cornering characteristics can be accurately reflected by effective cornering stiffness which is an important parameter in research of vehicle handling and stability.
等效侧偏刚度精确地反映了轮胎的侧偏特性，是汽车操纵稳定性研究中的重要参数。
Tire Non-steady state cornering characteristics; Semi-empirical model;
轮胎；非稳态转向特性；半经验模型；
Tire cornering performance in situ is important to steering system matching.
轮胎原地转向特性对转向系统设计匹配至关重要。
The handling and the stability can be improved in limit cornering by using the VDC.
汽车动力学稳定性控制（VDC）可以改善汽车在这些极限情况下的操纵性和稳定性。
The paper makes an intensive theoretic study on vehicles in cornering with braking.
本文对汽车转弯制动工况作了深入的理论分析。
Those special cornering styles are formed in an early age, each of them is unique and difficult to be imitated.
那些特别的过弯方式是早期形成的，每个都是独特而难于模仿的。
In overtaking battles the driver in front's best defence is his ability to pick braking points and cornering lines.
在超车事件中，前方车手最好的防御措施就是选取制动点和过弯路线。
This paper applies ANSYS in computing the car wheels strength, simulates the dynamic cornering fatigue test and counts the fatigue life.
运用ANSYS软件对柳州钢圈厂某型号轿车钢圈进行有限元分析，模仿其动态弯曲疲劳测试试验并计算其疲劳寿命。
With the fast economic growth, the resource restriction has become an important issue cornering China's economical and industrial security.
伴随着我国经济的高速增长，资源约束越来越成为影响我国经济与产业安全的重要问题。
Based on the model of tire static vertical properties, the modeling of tire pure cornering properties by using modal parameters is studied.
在轮胎静垂直特性建模的基础上，探讨了利用轮胎模态参数对轮胎纯侧偏特性的建模。
Vehicle in cornering braking conditions is very easy to lose stability, anti lock braking system (ABS) greatly improves the stability of the vehicle turning.
车辆在弯道制动的条件下很容易失去稳定性，防抱死系统(abs)在很大程度上提高了车辆转弯的稳定性。
So it is pointed out that in defining tread parameters in analytic tire model, the effect of tread on steady cornering model should be considered in the first...
因此，在确定轮胎解析模型中胎面花纹参数时应首先考虑其对侧偏模型的影响。
Oversteer in the "textbook" sense is the difference between cornering stiffness at front and rear, taking into account tyre characteristics, geometries, bush rates, etc, etc.
转向过度在教科书中是指前后轮转向刚度的不同，需要考虑到轮胎的特性，几何学，衬套比率等。
Based on static vertical models, the model of tire cornering properties was established with lateral modal parameters which were extracted from lateral excitation experiments.
在静垂直模型基础上利用轮胎的侧向模态参数建立了轮胎稳态侧偏特性模型。
Through lateral exciting experiment the lateral modal parameters of a tire are extracted and the cornering properties of the tire under different loading conditions are calculated.
通过侧向激振试验提取了轮胎的侧向模态参数并计算了轮胎在不同载荷下的偏离特性，计算结果与以往轮胎的试验结果具有很好的一致性。
Using Lagrangian analysis method, a 3-dof multi-axle steering vehicle model is established, which considers steering system stiffness, cornering stiffness and power steering system.
利用拉格朗日分析力学体系，推导了考虑转向系统刚度、轮胎侧偏刚度和转向助力等因素的线性多轴转向车辆的三自由度普适动力学方程。
The comparison of simulation results with test results shows that the model well reflect the non-linear cornering properties of the tire. The model can be applied to the studies of …
仿真结果和试验结果对比表明，该模型足以反映轮胎非线性转向特性，可用于前轮摆振及汽车操纵动力学仿真方面的研究。
Discussions are focused on the effects of ice surface temperature, normal load, inflation pressure and tire tread patterns on cornering behavior of a tire on ice and on dry pavements.
重点讨论了冰面温度、轮胎负荷、轮胎气压和胎面花纹等因素对侧偏特性的影响规律。
The distribution of the tire side force was obtained by using geometric deformation of contact patch of cornering tires and the principle of modeling tire with experimental modal parameters.
对轮胎进行侧向激振试验得到轮胎的侧向模态参数，依据轮胎侧偏时印迹的几何变形及模态参数建模的思想，得到了侧向力分布。
This machine is applicable for the back flat-pressing and square-cornering of the saddle-stitched or flat-bound exercise books of various sizes. The bound exercise books are more good-looking.
本机适用于各种规格的骑马装订或平订练习本的脊背压平和打成方角，便装订后的练习本更加美观。
Stability control; Virtual prototyping; Cornering; Yaw; Winter test;
稳定性控制；虚拟样机；侧偏；横摆；冬季试验；
Three axle vehicle; Vehicle dynamics; Response; Steering character; Cornering force;
三轴汽车；汽车动力学；响应；转向特性；侧偏力；
Three axle vehicle; Vehicle dynamics; Response; Steering character; Cornering force;
三轴汽车；汽车动力学；响应；转向特性；侧偏力；
应用推荐