By using the method, the core pulling efficiency for the slender composite pipe can be remarkably improved, and the production cost can be reduced.
利用本发明方法,可显著地提高细长复材管件的抽芯效率,降低生产成本。
A kind of ringed core pulling mechanism of injection die of plastic casing coupling is introduced.
介绍了塑料管套注射模的环形型芯抽芯机构。
A novel internal core pulling mechanism of injection mould is designed for the part with internal full circle undercut.
针对具有整圆内侧倒扣特征的注塑件,设计了一种新颖的注塑模内缩机构。
T he plastics suction mould by this design is impact in structure and reliable in core pulling, and has high production efficiency.
采用该方法设计的吸塑模结构紧凑,抽芯可靠,生产效率高。
Downward core pulling has a significant effect in improving the quality of auto-piston casting and lowering the energy consumption.
铝活塞下抽芯铸造工艺,在提高铝活塞的铸造质量、节约降耗等方面作用突出。
The problems of large length-diameter ratio and difficult core pulling for slender pipe-shaped composite parts with poor rigidity can be solved.
解决了长径比大,刚性差细长管形复材零件抽芯困难的问题。
The thesis presents a practical die structure with dog-leg cam and angle pin for secondary combined angle core pulling of die casting draw hooks.
本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构,论述了模具结构特点和工作过程。
The thesis presents a practical die structure with dog-leg CAM and Angle pin for secondary combined Angle core pulling of die casting draw hooks.
本文给出了拉钩铸件弯销-斜销二级联合斜向抽芯压铸模实用结构,论述了模具分型面的确定、结构特点和工作原理。
The contractile interior core pulling mould structure was designed for the molding of the concave part of inner side of outer casing of flow meter.
为成型流量计外壳内侧凹进部分,设计了收缩内抽芯模具结构。
The working principle of the die casting mould has been discussed, and the core pulling force, the core pulling distance and the diameter of the angle pin have been confirmed by calculation.
论述了壳体铸件压铸模工作原理,通过计算确定了抽芯力和抽芯距离以及斜销直径。
In accordance with the characteristics of 2-dimensional core pulling of product, the side parting surface and core pulling structure of mould was designed by means of comparison and analysis.
针对制品两面抽芯的特点,通过比较分析制定了模具的侧向分型与抽芯结构形式。
If the casting is taken out from the moving die, long distance core pulling is needed according to the shape of the casting, so the mechanism of the sliding block which rotates midway was designed.
根据铸件形状特点,若在动模内取出铸件,需长距离抽芯,故设计了滑块中途自行转动机构。
The core-pulling mechanism can safely and reliably accomplish the core-pulling motions, and the quality of molded plastic products can meet the requirements of design and operation.
所设计的模具抽芯机构在实际应用中运动平稳,抽芯、复位准确,成型的塑料件质量符合设计和使用要求。
Adopted manual gear core-pulling and the moving insert block core-pulling .
该模具采用了手动齿轮抽芯和活动镶块两种机构。
Through analyzing molding process of the circular plug crust, determined injection mold structure with double core-pulling.
通过对圆形插头壳体的工艺分析,确定了双抽芯的模具结构。
The design steps of injection mold for the shaver frame were introduced in detail, mainly introduced the slide core-pulling mechanism.
详细介绍了剃须刀头架注射模设计过程,重点介绍了滑块抽芯机构设计特点。
The design of the side core-pulling delay mechanism is stated in detail, The open-close action of the mould is simulated.
本文对延时侧抽芯机构设计作了详细阐述,并模拟了模具的开合运动。
At the same time, introduce the principle of side core-pulling mechanism of gear and rack injection mold, and design gist of a rack.
掌握长抽距或斜抽芯塑件的结构工艺分析及抽芯距、抽芯力的计算,齿轮、齿条注射模侧向抽芯机构的原理和齿轮、齿条设计要点尤其关键。
A practical mechanism for the core-pulling of inside groove was presented. The core-pulling was achieved by applying the deformation of helical spring steel sheet during the ejecting process.
介绍了一种实用的内侧槽抽芯机构,可利用螺旋形弹簧钢板的顶出变形实现内侧抽芯,并阐述了抽芯机构的工作过程和关键技术。
The method of two-step core-pulling in forming the component with internal annular groove was introduced.
介绍了成型内置圆环槽结构制品的二步抽芯方法。
The specialty of the design is the flexible core-pulling structure that solved the difficult problem of unloading the screw thread and moulding the through hole at the same place.
其特别之处在于采用灵活的抽芯机构解决了在同一位置脱螺纹和成型碰穿孔的复杂问题。
The core-pulling mechanism can safely and reliably accomplish the core-pulling motions, and the quality of mol…
所设计的模具抽芯机构在实际应用中运动平稳,抽芯、复位准确,成型的塑料件质量符合设计和使用要求。
Dissertation was made on the structure characteristics and principle of the die-casting die with dog-leg CAM and angle-lift splits core-pulling mechanism.
给出了实用的弯销与斜滑块抽芯结构,论述了其结构特点和工作原理。
Hydraulic pressure core-pulling is adopted in this mechanism, and it can accomplish linear and arc directional core-pulling motions.
该机构采用液压抽芯,能完成弯管处的直线和弧线两个抽芯动作。
Through analyzing on the product structure, designed a simple and workable mold with half structure to solve the side core-pulling problems, simplified mold structure and saved mold cost.
通过对产品的结构分析,设计一种简单可行的哈夫结构模具,以解决侧向抽芯的问题,简化模具结构,节省成本。
The core-pulling mechanism with swing block was introduced, and an injection mold with swing block was designed.
介绍了摆动块内抽芯机构,并设计了摆动块内抽芯注射模。
The design of the die adopted reasonable insert structure, which solved the problem of the slide short of strength and the die sets short of rigidity in the core-pulling process.
模具设计采用了合理的镶件结构,解决了滑块在抽芯过程中的强度不足以及模架刚性不足等问题。
Adopted floating core and Angle guide pin core-pulling mechanism, production efficiency was high, it had a certain reference function to similar plastic mold.
采用浮动型芯及斜导柱抽芯机构,生产效率高,对同类注塑件生产提供了有益的借鉴。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构,重点介绍侧抽芯大滑块的设计,顶出机构和进浇方法的改进。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构,重点介绍侧抽芯大滑块的设计,顶出机构和进浇方法的改进。
应用推荐