A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于预热燃烧风富氧下铜精炼阳极炉高温烟气热损失数学模型，并根据富氧燃烧风对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
The paper describes operating conditions of Isa furnace ESP in Yunnan Copper over years and presents problems occurring and measures for improvement.
叙述了云南铜业艾萨炉电除尘器几年来的运行状况，介绍了出现的问题及改进措施。
It can improve the control quality to fit the requirement of a process control system for use with a no oxygen copper rod furnace.
该方案在无氧铜杆炉控制系统投用，使控制性能有较大的提高，能满足生产过程的要求。
This article presents the requirement of automatic control for the production process of a copper smelting furnace and the application of DCS to process.
本文介绍铜冶炼鼓风炉生产过程的自动控制要求以及小型集散控制系统在该过程的应用情况。
To determine trace copper and lead and cadmium in water by using the method of Graphite Furnace Atomic Absorption spectrophotometry in the paper.
用石墨炉原子吸收分光光度法对水中痕量铜、铅、镉样品进行测定。
The article brings a discussion to the technology of melting high impurity black copper with a tilting furnace. It is a good attempt of new adopted smelting technology.
对倾动炉处理高杂质黑铜的冶炼技术进行了多方面的论述，对新的冶炼操作方式进行有益的尝试。
Furthermore, some reasonable advices are given and they should be beneficial to enhance more energy saving in deoxidization period of copper refining anode furnace.
此外，给出了一些合理化建议，有利于铜精炼阳极炉还原期节能效果进一步提高。
The hot test of the copper cooling stave with circular channels was done in the test furnace designed by the authors.
在自行研制的热态试验炉上对圆孔型铜冷却壁进行了热模拟试验。
The sample of red copper glaze was imitated in pipe furnace under the reduction atmosphere offered by self-making co reaction furnace.
用自制一氧化碳发生炉提供的还原气氛，在管式炉中仿制了铜红釉试片。
Furthermore, the value of heat inertia in the hearth of copper refining rotary anode furnace in the reduction phase is so big that smoke temperature change can not quickly respond to the disturbance.
且铜精炼氧化过程炉膛具有很大的热惯性，这直接导致炉膛烟气温度动态响应速度很慢、动态过程时间很长的现象出现。
The reason of high copper content in electric furnance slag during smelting in Ausmelt furnace is analysed, the corresponding countermeasures for reducing copper content are put forward.
分析了奥斯麦特炉熔炼过程中电炉渣含铜高的原因，提出相应对策来降低渣中含铜量。
A method for the determination of gallium by the tantalum foil-lined graphite furnace atomic absorption spectrometry with vanadium and copper as mixed matrix modifier has been investigated.
提出用钒和铜混合基体改进剂衬钽管石墨炉原子吸收测定镓的方法。
The lining structure with concentrated copper cooling plate-stave combined system for the large-scale blast furnace is the important guarantee of 18 ~ 20 campaign life.
大型高炉的密集式铜冷却板与冷却壁结合的炉衬结构是使高炉寿命达到18 ~20年的一项重要保证措施。
The discussion on the temperature measuring techniques for liquid metal melts of copper, aluminum and the melt in a cementite furnace etc. is put stress on.
着重讨论了渗碳炉、铜、铝等液态金属熔体温度检测技术。
It is simple and quick to determine trace Pb and Bi in pure copper using the graphite furnace atomic absorption spectrophotometry.
石墨炉原子吸收光谱法测定纯铜中痕量铅和铋，方法可靠，简单快速。
A novel technology of soda-lead concentrates reverberatory furnace smelting is put forward according to the characteristics of copper dross with low sulfur and high copper content.
针对某冶炼厂生产浮渣含硫低、含铜高的特点，提出了苏打—铅精矿反射炉熔炼新工艺。
The effecting factors on the working period of copper anode furnace are discussed in detail, and the methods prolonging the working period of copper anode furnace are put forward.
阐述了影响铜阳极炉开动周期的诸多因素，并提出了延长阳极炉开动周期的办法。
With capasity of 1mt / hour and and so a coreless copper induction melting furnace with 600 kg / hour capacity.
生产能力为1公吨/小时而且无核铜熔炼窑有600公斤/小时的生产能力。
A mathematical model of heavy oil flux about rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于燃烧风预热下铜精炼阳极炉重油流量数学模型，并根据不同预热燃烧风温度对铜精炼阳极炉氧化期重油流量数学模型进行计算。
It dealed with the problem of brazing of steel hardware and copper that nitrogen base controlled atmosphere continuous brazing furnace.
研制的氮基可控气氛连续钎焊炉，成功地解决了钢质零件的铜钎焊问题。
In Guixi Smelter, the highest furnace life of copper converter is 242 heats and the average life is remained about 220 heats.
贵冶炼铜转炉寿命最高炉龄为242炉，平均炉龄维持在220炉左右。
The loss of copper in electric furnace slag during flash smelting operation is described.
介绍了在闪速熔炼过程中，铜在电炉渣中的损失状况。
The results showed that reducing trend of LPG flux about deoxidation period of rotary anode furnace in copper refining was quite obvious its saving energy was remarkable with the increase of temper…
此外，给出了一些合理化建议，有利于铜精炼阳极炉还原期节能效果进一步提高。
Copper cooling equipments for electrical melting furnaces are applied to electric arc furnace, like high-power smelting electric furnace.
电炉铜冷却设备(炉盖，压力环、铜瓦、保护屏，导电立管等)：电炉铜冷却设备应用在大功率矿热炉等电弧炉上。
A numerical model for simulating the temperature field of titanium melted in induction furnace with a water cooled copper crucible has been developed by using the direct finite difference method.
利用直接差分法，建立了水冷铜坩埚感应熔炼过程温度场数值模拟计算模型。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于燃烧风预热下铜精炼阳极炉高温烟气热损失数学模型，并根据不同预热燃烧风温度对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
The paper introduces the procedure for MIG welding of copper helical tuyere of blast furnace.
介绍了高炉紫铜螺旋风口的熔化极氩弧焊工艺。
A kind of environmental protection fuel melting copper reverberatory furnace with spray nozzle is introduced.
介绍一种环保型喷嘴燃油熔铜反射炉，利用炉盖式套管提升机构实现封闭式熔炼。
A kind of environmental protection fuel melting copper reverberatory furnace with spray nozzle is introduced.
介绍一种环保型喷嘴燃油熔铜反射炉，利用炉盖式套管提升机构实现封闭式熔炼。
应用推荐