Part of the plan to minimize carbon emissions is to passively heat and cool the district buildings instead of using water and energy-intensive cooling towers.
其中部分建筑群的设计，为减少二氧化碳排放，将以冷热自动调节取代水和能源密集型冷却塔。
The cooling pipe, using circling cooled water to reduce the heat of hydration in concrete DAMS, is the most efficient method for temperature controlling in concrete DAMS.
在混凝土坝中利用冷却水管中循环冷水来降低混凝土内部水泥的水化热温升，是混凝土坝温度控制的最有效措施。
Using the heat of welding to vapour water, cooling rates are lowered on the weld bead and heat -affected zone.
利用焊接时的加热使水汽化，不仅使焊道而且使热影响区的冷却速度减慢。
Using these experimental results, heat transfer performance in spray cooling can be optimized.
根据以上实验结果可以最优化喷雾冷却性能。
Coastal areas are ideal sites for using the seawater-source heat pump technology (SWHP) to achieve cooling and heating.
沿海地区是利用海水源热泵进行供热供冷的理想位置。
The era that electricity generation in large scale using surplus heat of industry yet, waste heat of vehicle and burn heat of garbage by the commercial thermoelectric cooling module is coming.
利用商用温差电致冷组件发电技术大规模开发工业余热、汽车废热、垃圾燃烧热的时代已经到来。
The research describes the formation of Widmanstatten structure and martensite in iron-carbon alloys possessing a broad range of carbon contents and heat treated using a broad range of cooling rates.
该项研究描述了铁碳合金中魏氏组织和马氏体的形成，所用合金具有宽的碳含量范围，热处理时采用的冷却速率范围也是宽的。
He has also designed a similar structure - called Council House Two - which has become one of Melbournes most energy efficient buildings, using the sun and the wind for heat and cooling.
他还设计了一个类似的建筑，并把它称作“统建房二号”。这个利用太阳和风取暖和降温的建筑成为墨尔本最节能的建筑之一。
It is generally obtained by the experimental method, namely using Newton cooling formula to get tube outside heat transfer coefficient, then get the tube outside Nusselt number.
一般通过实验的方法求得，即运用牛顿冷却公式求出管外对流换热系数，进而求得管外努谢尔数。
In order to save costs and avoid using two thermal expansion valves, the paper proposed a new throttle mechanism used for the heat pump and realizes the best match of the cooling and heating.
为了节约成本，避免使用两个热力膨胀阀，文章提出了一种新型的用于热泵的节流机构，实现了制冷和制热的最佳匹配。
Through the research of heat transfer regularity in plates water cooling and air cooling process, the cooling model of medium plate double rolling mills is established by using difference equation.
针对某中板厂提供的轧制工艺参数及目标控制参数，通过研究钢板水冷及空冷过程的换热规律，利用差分方程建立了中厚板双机架间的冷却模型。
He has also designed a similar structure - called Council House Two - which has become one of Melbourne's most energy efficient buildings, using the sun and the wind for heat and cooling.
他还设计了相似的建筑，称为“统建房二”，这成为墨尔本最节能的建筑之一，该建筑利用阳光和自然风取暖和降温。
By using a flat interface model it is possible to determine the effective length of a gas-filled heat pipe cooling section.
对充气热管空气预热器的结构进行分析和应用介绍，采用平界面模型，确定充气热管冷却段的有效长度。
This paper mainly describes the practice of Using the reclaimed sewage as a supple- mental water supply source for the cooling systems of heat and power plants in the United States.
本文主要介绍美国热电厂利用城市污水为源水，经再生回用于冷却水补充水的情况。
The variation of fouling resistance and frictional resistance coefficient of heat exchanger using connate Yangtze River water as cooling water is tested experimentally.
通过实验方法测试了以原生长江水为冷却水的换热器污垢热阻和摩阻系数的变化。
The cooling unit is made using a cooling part of a cooling cycle which circulates a coolant between a heat-radiating part and the cooling part.
所述冷却装置使用冷却循环中的冷却部件来构造，所述冷却循环使冷却剂在散热部件和所述冷却部件之间循环。
A dynamic mathematic model has been established by analyzing the heat transfer mechanism in the cylinder liner water cooling system of main Marine engine using the transfer theory.
根据传热学的相关理论，对船舶主机缸套冷却水系统的传热进行分析，给出了系统的热力动态数学模型。
Using stable heat transferring theory, a thermo hydraulic model has been built, which has considered the influence of the core temperature and cooling hydrogen temperature.
采用稳态传热的理论，建立了考虑定子铁心温度的定子绕组温度水力模型。
Using the method of heat-mass transfer analogy, experimental research was carried on to investigate adiabatic film effectiveness of inclined multi-hole full-coverage film cooling.
采用传热传质类比的方法，对多斜孔壁气膜冷却的绝热温比进行了实验研究。
Gear in heat treatment furnace, must maintain a uniform temperature, and using the apparatus, the gear is uniformly heating and cooling, is strictly prohibited stacking together.
齿轮在热处理中，一定要保持炉膛温度均匀，以及采用工位器具，使齿轮均匀地加热及冷却，严禁堆放在一起。
The heat transfer ability of the system was strengthened with the increase of strength of internal cooling, and this became more remarkable when using CGT rollers.
随着内冷对流换热系数的增加，铸轧系统的传热能力有所增加，但采用CGT辊套材料时，内冷对流换热系数对传热能力的影响更为显著。
A plate heat exchanger having an excellent sea water corrosion resistance is also provided wherein the aluminium alloy material is used as a heat transfer unit using sea water as cooling water.
另外，该板式换热器是将海水作为冷却水的传热部使用所述铝合金材料的耐海水腐蚀性出色的板式换热器。
An integrated heat sink using heat pipes for cooling CPU is proposed in the paper. The structural characteristics are also introduced.
设计了一种用于CPU冷却的集成热管散热器，介绍了其结构特点。
An integrated heat sink using heat pipes for cooling CPU is proposed in the paper. The structural characteristics are also introduced.
设计了一种用于CPU冷却的集成热管散热器，介绍了其结构特点。
应用推荐