In theory, such a system would save on heating and cooling bills by exposing computers to low-temperature offices while exposing office workers to the warmth of the computers.
理论上，这样的系统能节约加热屋子和冷却机器的花销，使得计算机房在保持低温下，而办公室工作人员享受到电脑带来的温暖。
The oval courtyard pond provides evaporative cooling, while the temperature of the building is regulated with a geothermal system that USES energy from the earth for heating and cooling.
椭圆形院落水池提供蒸发冷却的功能，同时使用地热系统来调节建筑的温度，该系统使用来自地球的能源来加热和冷却。
So another important job of the cooling system is to allow the engine to heat up as quickly as possible, and then to keep the engine at a constant temperature.
因此冷却系统还有一个重要任务，就是让发动机迅速预热，然后，就让发动机保持恒定的温度。
According to the analysis of types of EMI sources in Ocean Water Colorand Temperature Scanner, EMC design of the Stirling cooling system will be proposed and the results of EMC test are given as well.
本文通过分析水色扫描仪的各种电磁干扰源，提出斯特林制冷系统的电磁兼容设计方法，并给出电磁干扰试验结果。
This paper mainly performs the design and temperature field simulation and research on Al low pressure casting die of cooling system of high-speed train.
本文主要对高速列车冷却系统用铝铸件的低压铸造模具进行了设计、温度场模拟和制造的研究。
We had to actually raise the temperature of the emergency core cooling system because the NRC thought our vessel was somewhat embrittled.
我们必须提高紧急核心冷却系统的温度，因为核管理委员会认为，我们的管道不知怎么变脆了。
The subcooler is a key device of cryogenic cooling system in High Temperature Superconducting (HTS) cables.
过冷器是高温超导电缆（HTS）低温冷却系统的关键设备之一。
The application and measuring method of a slab surface temperature measuring system for secondary cooling zone of continuous casting are introduced.
本文介绍一个连铸二冷区铸坯表面温度测量系统的测量方法和实际应用情况。
This system consists of five parts: heating furnace with circulation cooling device, detection system, temperature control system, microcomputer and printer.
系统由具有循环冷却装置的加热炉、检测系统、温度控制系统、微型计算机和打印机五部分组成。
Cooling force in electron cooling system is closely related to the temperature of electron beam.
电子冷却系统中冷却力的大小与电子束的温度密切相关。
Cooling system: Apparatus used to keep the temperature of a structure or device from exceeding limits imposed by needs of safety and efficiency.
冷却系统：保持建筑物或设备不超过为确保安全、高效率和舒适所规定温度限的装置。
Advanced industry water-cooling system, anhydrous automatic power-off and high-temperature alarm makes the machine more stable.
配置先进的工业水冷却系统，无水自动断电和高温报警的保护功能，极大的提高了机器的稳定性。
The results is used as the basis of ventilation and cooling system design of the motor, and the boundary condition of temperature field computation to calculate temperature field of the motor.
计算出的数值可作为电机通风冷却系统设计的依据，同时可作为温度场计算的边界条件来进行电机温度场计算。
The purpose of the cooling system is to keep the engine at its most efficient operating temperature at all engine speeds and all driving conditions.
冷却系统的作用是使发动机在各种转速和各种行驶状态下都能有效地控制温度。
The present problems of temperature decreased in electrical system are analyzed, and the compare of evaporative cooling method and traditional methods are made.
分析目前电力系统中降温方面存在的问题，并对相变降温方式与传统降温方式进行比较。
The laminar cooling system has synthetic complexities such as highly nonlinear, variations of operating conditions and the difficulty of measuring the strip temperature online.
层流冷却系统具有强非线性、工况变化频繁、带钢温度不能连续测量等综合复杂性。
The system efficiency, cooling or heating efficiency, residual heat efficiency on CCHP in different seasons are analyzed through changing heat recover ratio, temperature ratio and pressure ratio.
通过改变微燃机回热度、温比、压比，分析了不同季节联供系统的系统效率、制冷或供热效率、微燃机发电效率、二次余热回收效率的变化；
Cooling control system between finishing mill regulates the water-flow with electric signal and compressed-air to control the temperature of the hot strip steel.
精轧机机架间带钢冷却控制系统，用电气控制信号和压缩空气联合控制冷却水的流量，从而达到热轧带钢温度控制的目的。
When the temperature is reduced, check whether the engine cooling system is short of water and cause high temperature.
待温度降低后，检查发动机冷却系是否缺水及产生高温的原因。
The guide roll's dynamic temperature field was analyzed by ANSYS, it provided the theory evidence for the guide roll's cooling system and its parameters' optimal design.
用ANSYS分析了导辊的动态温度场，为导辊冷却系统及其参数的优化设计提供了理论依据。
The biggest merit of water-cooling system is transferring heat to radiator without decreasing the temperature in the machine box, but cooling computer component with liquid.
水冷最大的优点在于不提高机身内部温度的情况下，就可以把热量传导给散热器，而不是利用液体来冷却电脑配件。
High efficiency liquid cooling system for optimum engine operating temperature - includes compact liquid cooled oil cooler.
高效率的液冷却系统为引擎提供了最佳的工作温度—他甚至还包含了一个紧凑的机油冷却器。
The purpose of the cooling system is to keep the engine at its most efficient operating temperature at all speeds under all driving conditions.
冷却系统的作用是保证引擎在任何路况的任何车速下都在最高效的的运行温度中。
Through a theoretical analysis on the causes of excessive radiator temperature, structural arrangement of the cooling system is improved so that every parts in the system can be rationally matched.
通过从理论上对水箱温度过高原因的分析，对冷却系统的结构布置提出了几种改进方案，并进行了热平衡试验，所选定的方案使冷却系统的各部件得到合理匹配，提高了冷却效果。
High temperature oil pump with self heat radiating system, do not require water for cooling pump body, simple structure, smaller size, cost, performance is very reliable.
高温油泵采用自热散热系统，不需要用水来冷却泵体，结构简化，体积变小，运行成本降低，性能却非常可靠。
Three-way regulating valve is currently used to control the temperature of cooling water in jacket cooling water system of main marine diesel engine.
为了实现船舶主柴油机的变流量冷却，需要对主机缸套冷却水系统进行水力计算。
An advanced control method is necessary for large low temperature (air cooling) environment simulation test system because of its complexity, more interference factors and poor safety.
大型低温(空气制冷)环境模拟试验系统的模型复杂、干扰因素多、安全性差，亟待寻求先进的控制方法支持。
Temperature control system adopts intelligent temperature controller that can preestablish temperature curve and forced drainage system can implement rapid cooling operation.
温度控制系统采用智能温控仪，可以预先设定温度曲线；强制排水系统可以实现快速降温操作。
Temperature control system adopts intelligent temperature controller that can preestablish temperature curve and forced drainage system can implement rapid cooling operation.
温度控制系统采用智能温控仪，可以预先设定温度曲线；强制排水系统可以实现快速降温操作。
应用推荐