The 1990s were even hotter, and the 2000s hotter still -- at an increasing rate despite a natural cooling cycle, just as Broecker predicted.
19世纪90年代更加热，到了20世纪仍旧在持续变热---正如布勒克预测的那样，违背了自然降温循环的规律，气温在以持续加速的趋势上升。
The cooling unit is made using a cooling part of a cooling cycle which circulates a coolant between a heat-radiating part and the cooling part.
所述冷却装置使用冷却循环中的冷却部件来构造，所述冷却循环使冷却剂在散热部件和所述冷却部件之间循环。
Scientists also believe it may also be possible that during the next upturn of the cycle, when solar activity increases, there might be a cooling effect at the Earth's surface.
科学家们相信，在周期的下一个上升期，也就是在太阳活动趋于频繁时，可能会对地球表面产生冷却效应。
They include advanced, membrane-filtered wastewater treatment systems, solar-powered, high-efficiency lighting and natural gas combined-cycle turbines that will deliver power, heating and cooling.
它们包括先进的薄膜过滤污水处理系统、高效的太阳能照明，以及用于供电、供热和制冷的天然气联合循环涡轮机。
Agitation can make the cooling medium cooling groove continuous cycle, so that the temperature is uniform.
搅拌可使冷却槽内的冷却介质不断循环，使温度均匀一致。
In open cycle condition, the frequency of the cleanness should base on cooling water quality.
在开式循环的情况下，清洁的间隔时间长短要根据冷却水的性质而定。
The results show that the efficiency of exergy utilization of this cycle is much superior to that of the Rankine cycle at the same border conditions of both heat and cooling sources.
结果表明，在相同的热源和冷源边界条件下，这一循环的利用效率远高于水蒸汽朗肯循环。
Spring Festival is approaching, the turnover trend in the property market hot zone is cooling, is the falling cycle really going to begin?
春节将至，楼市热点区域成交呈降温态势，下跌周期真的要开始了吗？
The main part of the cooling system is a 3-wheel air-cycle machine which works as a self-controlled system for heating and cooling.
冷却系统的主要部件是一部3轮空气循环机，是可以进行加热和制冷工作的自维持系统。
Based on the brake characteristic of water-cooling disc brakes during going down, the FEM model of thermal analysis during cycle braking is established.
基于盘式刹车在下钻过程中的制动特性，建立了水冷式刹车盘下钻过程中循环制动的有限元分析模型。
The main factors that affect the grain refinement are heating and cooling rate, holding time and cycle index.
影响细化效果的主要因素有：加热速度、保温时间、冷却速度和循环次数。
The cooling system of reverse bootstrap air cycle driven by powered turbine can be used for cooling the avionics pods.
通过比较指出：动力涡轮驱动的逆升压式空气循环制冷系统是适用于电子设备吊舱冷却的有效方案之一。
From an analysis of the cycle influencing main parameters it is ascertained that the condensing temperature of secondary cooling medium exercises a very great influence on the cycle efficiency.
对影响循环的主要参数分析表明，二次冷媒的冷凝温度及膨胀机进口压力对循环的效率影响很大。
This system is the closed cycle cooling water system applicable for turbine and boiler's auxiliary machines.
该系统为闭式环路冷却水系统，用于汽机及锅炉辅机。
Air CYCLE MACHINE, a compressor and turbine on a common shaft for cooling the air in an air conditioning system.
涡轮冷却器，是装在同一根转轴上的压气机和涡轮，用于冷却空调系统中的空气。
Optional internal cooling systems dramatically reduce cooling times, shortening total cycle time and maximizing furnace usage.
可选的内部冷却系统，大大减少冷却时间，缩短整体循环时间，最大化熔炉使用效率。
To establish production cycle also effects, such as the filling time, cooling time and spraying time are based not stable variables.
对生产周期也建立影响，如填充时间、冷却时间及喷涂时间都建立不稳定的变数。
The fluid and heat transfer math model in a steam cooling system with natural cycle has been built up on the pusher reheating furnace.
以推钢式连续加热炉为对象，建立了炉底纵水管自然循环汽化冷却系统的流动及传热数学模型，并根据该模型计算出汽包压力对系统工作指标的影响。
HD series water-cooled type cold and dry machine is the use of water as a carrier for cooling refrigerant, thus completing the entire refrigeration cycle.
天源系列水冷型冷干机是利用水作为载体来冷却制冷压缩机的冷媒，从而完成整个制冷循环。
The process of naked cooling with nitrogen cycle refrigeration was proposed according to the producing requirement, followed by some points to note during the naked cooling process.
根据生产需要，提供了利用氮气循环制冷实现空分设备裸冷的工艺方法，分析了实施过程中的注意问题；
The RHCM mold should realize rapid heating and cooling to the scheduled temperature in the injection molding cycle.
RHCM技术的关键是在注塑周期中，能够使模具快速加热和冷却到预定的工艺温度。
The incubation period of crack nucleation decreases and the crack propagation rate increases with the increase of thermal cycling temperature and cooling rate in the cycle.
随循环温度和冷却速率的增加，裂纹形核的孕育期缩短，裂纹扩展速率增加。
A vapour cycle upgrade was undertaken to meet the increased avionics cooling requirement, while also introducing an environmentally friendly cooling refrigerant (R-134a).
蒸气周期升级被承担符合增加的航空电子学冷却要求，虽然同样介绍不伤环境的冷却的冷冻剂(R- 134a)。
For cooling system, the absorption-diffusion cycle is adopted and its structural design and working parameters are also introduced.
制冷机采用吸收扩散式制冷循环，对主要参数的选择和结构设计特点做了说明。
Use minimum back pressure and slowest screw speed possible in retracting screw during cooling portion of cycle.
使用最低螺杆背压和速度最慢回缩循环冷却过程中的一部分螺丝可能。
After forming and cooling, everything opens up and the carriage will pull back and repeat the cycle.
后的形成和冷却，一切都打开了和运输将退出回，并重复循环。
After forming and cooling, everything opens up and the carriage will pull back and repeat the cycle.
后的形成和冷却，一切都打开了和运输将退出回，并重复循环。
应用推荐