The statistic cooling characteristic of a new type of aqueous polymer quenchants(KHP-W) was researched by using testing instrument.
采用冷却介质性能检测仪对新型聚合物型冷却介质KHP-W的静态冷却性能进行了探究。
Based on vacuum pumping accompanied with throttling process, presenting several superfluid helium cooling cycles and analyzing their flow principle and cooling characteristic.
以抽真空与节流相结合为基础，给出了几种超流氦冷却循环方式；分析了这几种方式的流程机理和冷却特性。
The structure and characteristic of vehicle separated cooling system were introduced.
介绍了车用分离循环式冷却系统的结构及其特点。
Based on the brake characteristic of water-cooling disc brakes during going down, the FEM model of thermal analysis during cycle braking is established.
基于盘式刹车在下钻过程中的制动特性，建立了水冷式刹车盘下钻过程中循环制动的有限元分析模型。
Floor cooling is a new type of air-conditioning, and it's characteristic is heating by low temperature water and cooling by high temperature water.
地板供冷是一种新型的空调方式，它的特点是低温供热、高温供冷。
This paper describes the methods of fan testing and making fan property curve by dimensionless characteristic coefficient for the cooling fan of air-cooled engines.
论述了风冷发动机冷却风扇的试验法和用无因次特性系数法制取风扇特性曲线的方法。
The technique characteristic of controlled rolling and controlled cooling are introduced as well as its application in bar continuous-rolling in Han Steel.
介绍了控制轧制和控制冷却的技术特点及其在邯钢连轧棒材生产中的应用。
The thermodynamic model of laser medium was established to study the thermodynamic characteristic in laser medium cooling of heat capacity laser.
为了研究热容激光器冷却过程中激光介质的热力学特性，建立了激光介质热力学理论模型。
By proper transforming of the system input and dynamic decoupling, a simple and useful model for partial cooling control has been obtained on the basis of the thermal transfer characteristic of rolls.
经过适当的输入变换和动态解耦，结合轧辊的热传输特性，最后获得了简单、实用的轧辊局部冷却控制模型。
Single crystal of spectinomycin dihydrochloride was cultivated by natural cooling method according to its characteristic of solubility.
根据盐酸大观霉素的溶解度特性，采用自然冷却法培养出单晶。
A new combined thermal power and cooling system is developed using the characteristic of low boiling non azeotropic ammonia water mixtures.
利用氨水混合物低沸点的特点，设计了以氨水混合物为工质的电冷联产循环系统。
This article combines the rolling characteristic of H-beam, analyzes concrete problems of controlled cooling in rolling process and makes the optimization project of H-beam controlled cooling.
结合H型钢轧制的特点，分析控制冷却在轧制中运用的具体问题，制定了H型钢控制冷却的优化方案。
This paper presented the study of preparation and performance of efficient desiccant according to characteristic of solid adsorption desiccant cooling.
针对固体吸附除湿制冷的特点，开展了高效除湿剂的制备及性能研究。
The cause of fan abnormal vibration is diagnosed by analyzing the spectrum characteristic of fan trouble for cooling tower. The normal running of fan is guaranteed.
通过分析冷却塔风机故障的频谱特征，诊断了风机运行异常振动原因并加以解决，确保了风机的正常运行。
The application process, electrical control, and the characteristic of circulating cooling water system for aluminium strip caster are introduced.
对铝带坯铸轧机新的循环冷却水系统的使用工艺、电气控制、系统特点进行了阐述。
The microstructure characteristic and its forming conditions of the low-carbon microalloyed steels were analysed, which were produced by controlled rolling and cooling in Wuyang Iron and Steel Co Ltd.
对舞钢采用控轧控冷工艺生产的低碳微合金钢的组织形貌及其形成条件进行了分析，认为组织细化是保证低碳微合金钢良好强韧性配合的重要因素。
Due to very high cooling rate, the nugget structure rapidly nucleates and grows. The refined microstructure of the nugget with rapidly solidified characteristic is formed.
极大的冷却速率使得接头组织瞬间形核并快速生长，形成组织细小致密具有快速凝固特征的焊接接头。
Based on annual cooling load calculation of a certain building, the relationship between envelop isolation characteristic and air-conditioning energy consumption of an office building is discussed.
通过对一特定建筑物进行全年空调负荷的计算，讨论和分析办公建筑围护结构保温性能与空调能耗的关系。
Meanwhile, strain hardening capacity of FSW joint in cooling water also enhances, and the tensile fracture presents the characteristic of microporous polymeric fracture.
接头的应变硬化能力增强，拉伸断口呈现出微孔聚合型断裂特征。
The purpose of the controlled-rolling and controlled-cooling technique and the application characteristic and tendency in links of production of high speed wire are introduced.
介绍了线材控制轧制和控制冷却工艺的目的，控制轧制和控制冷却在高速线材生产过程中各个环节的应用特点及发展趋势。
The purpose of the controlled-rolling and controlled-cooling technique and the application characteristic and tendency in links of production of high speed wire are introduced.
介绍了线材控制轧制和控制冷却工艺的目的，控制轧制和控制冷却在高速线材生产过程中各个环节的应用特点及发展趋势。
应用推荐