Based on the Direct Torque control, drive the induct motor by Matrix converter, apply the Direct Torque control theory to control induct motor and adjust speed.
在直接转矩控制理论的基础上，将矩阵变换器供电异步电机，应用直接转矩控制理论对电机进行调速。
But variable torque converter provides a good means for solving the problem.
可调液力变矩器为解决这一问题提供了良好的途径。
At the same time, the automatic energy-saving mode frequency converter LG, can make the motor in the meet load torque requirements to minimum current operation, to reach better energy saving effect.
同时，LG变频器的自动节能模式，可使电机在满足负载转矩要求下以最小电流运行，达到更好的节电效果。
In this paper, three elevators for the design of objects, combined with Sanken VM06 series of high-performance constant torque converter, developed a two-speed exchange of PLC elevator control system.
本文以三层电梯为设计对象，结合三垦vm06系列恒转矩高性能变频器，开发出一套交流双速的PLC电梯控制系统。
This paper introduced the goals, problems and control requirements of TCC (torque converter clutch) engagement, especially component and operation principle of its slip control system.
本文介绍了变矩器闭锁的目的、问题和控制要求，说明了变矩器闭锁离合器打滑控制系统的组成和工作原理。
In the hydraulic drive machines, the key to good power, acceleration and economy is the proper and rational matching of power source with the hydraulic torque converter.
在液力传动机械中，将动力源与液力变矩器进行正确而合理的匹配，是使其获得良好的动力性、加速性和经济性的关键。
This paper mainly describes the ener-gy loss and its harm caused by insufficient working flow rate and pressure of torque converter, inclnding the corresponding measures of compensation.
本文着重论述了由于变矩器工作流量和压力不足带来的能量损失及其危害，以及对此所采取的补偿措施。
In this paper, a direct instantaneous torque control (DITC) of switched reluctance motor (SRM) with a four-level converter is presented.
主要论述了基于四电平功率变换电路的开关磁阻电机直接瞬时转矩控制。
The drive system on Model TCM870 loader features three-element torque converter and counter shaft, constant mesh, power-shift transmission.
TCM 870装载机传动系统，采用三元件液力变矩器和定轴式常啮合动力换档变速器。
This method has been for many times used for date-processing in tests of hydraulic torque converter and proved to be useful and effective.
这一方法曾多次应用于液力变矩器试验数据的处理过程，证明是可行而有效的。
In the light of the problem of excessive fuel consumption in hydraulic torque converter drive of mechanical drilling RIGS, experiments on the hydraulic coupling transmission are conducted.
针对机械驱动钻机液力变矩器传动消耗燃油多的问题，开展了液力偶合器传动的试验。
This article introduces basic check on torque converter, analyzing causes of malfunction in torque converter, bringing about several methods of maintaining converter.
介绍了液力变扭器的基本检查，分析了液力变扭器故障的原因，提出了一些检修液力变扭器的方法。
This paper analyzes the input and output characteristics of power unit that widely apply diesel engine and torque converter.
本文分析了广泛使用的柴油机加变矩器组成的动力机组的输入、输出特性。
This paper describes the design features of a test bed for diesel engine combined with hydraulic torque converter and represents the test specifications and the processing of measured data.
本文介绍一种柴油机-液力变矩器联合试车装置的结构特点、试车规范及测试数据的计算。
An automatic transmission is connected to the engine via a torque converter.
自动变速器是通过液力变矩器与发动机相连的。
Based on the practical situations of current construction equipment maintenance, the fault of master clutch, hydraulic torque converter, driving bridge, steering clutch and brake are discussed.
结合当前工程机械维修工作的实际情况，对主离合器、液力变矩器、驱动桥、转向离合器和转向制动器等部位的故障现象进行了深入的探讨。
The paper discussed the working principle and speed control characteristic of variable torque converter with quide vanes, and presented the good effects being obtained from its appl…
本文论述了导轮叶片可调变矩器的工作原理、调速特性和应用于电动铲运机上所取得的良好效果。
In this dissertation we will study the interval flow of hydraulic torque converter with UG and ANSYS software.
本文在UG和ANSYS软件的基础上对液力变矩器的内部流场进行研究。
Through characteristic analysis the article expounds that applying the torque converter is favourable for improving the drive characteristics of the drawworks.
通过变矩器传动绞车特性设计分析，阐明了变矩器传动有助于绞车驱动特性的改善，体现了液力传动的优点。
The control system is composed of the engine control automatic shifting control, torque converter lockup closed-loop control, and shift quality control etc.
控制系统是由发动机控制、自动换挡控制掖力变矩器闭锁闭环控制换挡品质控制等部分组成。
Calculation simulation is conducted with model LB46 hydraulic torque converter as a basic model and output characteristics of the partially filled converter are obtained.
采用LB46型液力变矩器为基型作计算仿真，得出了液力变矩器部分充液输出特性。
The article comprehensively states the bentch design tor the hydraulic torque converter controlled by microcomputer, and describes each part in the bentch and its function features.
综述了微机控制液力变矩器性能试验台设计，描述了试验台各组成部分和功能特点。
The internal characteristics of the torque converter were calculated from its tested external characteristics by the method of proration.
根据综合式液力变矩器外特性的试验结果，应用比例分配法对其内特性进行了计算。
Such transmissions make use of a fluid coupling or a torque converter, as well as mechanical, hydraulic, or electrical controls.
除了用机械装置、液压装置或电力装置来控制外，这种变速器还使用液力耦合器或变扭器。
The magnitude of deformation affects the performance of hydraulic torque converter and its connection with adjacent parts.
其变形的大小将直接影响到液力变矩器的性能和在工作中与相邻零部件间的位置关系。
In view of saving energy and enhancing transmission efficiency, a new PLC and HMI based shift control to 4d180 hydraulic torque converter is proposed.
从提高传动效率和节能的角度出发，提出用PLC(可编程序控制器)和HMI(人机界面)控制电液自动变速器(4d180型)的全新控制方案。
According to experimental research and statistical information, the torque converter series products based on W305 torque converter is determined;
以W305液力变矩器为基型，通过试验研究和统计资料，确定了液力变矩器的系列化型谱；
The apparatus of the present invention provides a torque converter that is looser at stall than it is at 0.8 speed ratio.
本发明的装置提供了在失速时比0.8速比时更松的液力变矩器。
This is why a torque converter has a stator.
这就是为什么一变矩器有一个定子。
This is why a torque converter has a stator.
这就是为什么一变矩器有一个定子。
应用推荐