Combining the nonlinear control system theory and the aim of chaos synchronization, we designed a nonlinear feedback controller for synchronizing the scalar output signal of Chua's Circuits system.
把非线性系统的微分几何理论与混沌系统的同步控制目标相结合，设计了蔡氏电路混沌系统的标量混沌信号同步控制的非线性反馈控制器。
According to tuning theory and control method of the magnetic bias ASC, the fully digital controller of the magnetic bias ASC is implemented.
根据偏磁式消弧线圈的调谐原理和控制方法，深入研究了偏磁式消弧线圈的全数字化控制器。
Fuzzy theory was used to design throttle controller and braking controller of traction control system for four-wheel drive vehicles.
针对四轮驱动汽车，应用模糊理论设计了牵引力控制系统的油门控制器和制动控制器。
In this paper, a DC motor speed control system based on fuzzy controller theory is introduced.
本文主要介绍了以模糊控制理论为基础的直流电机调速模糊控制系统。
The repetitive controller based on the theory of internal model produces correction signal based on the control error of the last cycle to eliminate the error in the latter cycle.
重复控制的基本思想是控制理论中的内模原理，根据上一周期的控制误差消除后面各周期性的信号误差。
A new digital controller is described for motor position based on variable structure control theory. Procedure for control system synthesis and experimental results are given as well.
本文阐述了一种用变结构控制理论的位置控制系统的新型数字控制器，并给出了系统的综合过程及试验结果。
Aiming at the nonlinearity of machine tool axis, this paper presents the methodology of fuzzy slide mode controller based on slide mode control theory in the viewpoint of VSS.
本文针对数控系统轴控制中存在的非线性问题，从变结构理论的角度，应用边界层滑动控制理论设计了一个模糊滑动控制器。
Sampled-data control theory offers theory guidance for computer control and design of sampled-data controller is a core problem of sampled-data control theory.
为计算机控制提供理论指导的是采样控制理论，而采样控制器设计是采样控制理论的一个核心问题。
A real time temperature controller for electric furnace is introduced. The controller is implemented upon fuzzy control theory.
介绍了一种基于模糊控制理论所实现的电炉温度实时控制器。
It also discusses the theory of compressor anti surge control, the function of anti surge controller and the application of anti surge control in cracking gas compressor of SECCO ethylene plant.
主要论述了压缩机的防喘振控制理论，防喘振控制器的功能及防喘振控制在赛科乙烯装置裂解气压缩机的应用。
In order to resolve the shortage, the thesis chooses the linear quadratic form optimal controller design scheme by applying linear state feedback control of the modern optimal control theory.
针对这种不足，选择现代控制理论中的线性状态反馈控制方法，采用了线性二次型最优控制器设计方案。
In the process of writing this thesis, first, based on the theory of the DC motor, controller and sensors, the control circuit has been designed.
在论文的写作过程中，首先对直流电机、微控制器和传感器等进行了深入的研究，在理论基础上，设计了系统的控制电路。
The double inverted pendulum is modeled and the controller is designed by using quadratic optimal control theory to its equilibrium control question.
针对二级倒立摆系统的平衡控制问题，对其进行数学建模，应用二次型最优控制理论设计了控制器。
According to Fuzzy mathematics and Fuzzy control theory, a Fuzzy controller suitable for coal mine is structured in this paper.
本文主要是应用模糊数学及模糊控制理论，构造了一个适用于煤矿安全控制领域的模糊控制器。
With the theory of engineering design method, a PD-Controller is serried in the first-channel of the control system, and the optimal parameters are obtained.
首先利用经典控制理论中的工程设计方法，在控制系统的前向通道中串联一个PD控制器，并合理的设计了控制器的参数。
The temperature controller is designed against the nonlinear delay object about textile dyeing by using the internal model control theory.
针对纺织染色这类具有典型非线性时滞的对象，利用肉模控制原理，设计了适用于染色过程的温度控制器。
Based on the theory of repetitive control, the repetitive controller, which makes the output of the system track the periodic reference signals, is designed.
根据重复控制理论设计重复控制器，使系统的输出跟踪输入的周期性或重复性参考信号，从而达到跟踪控制的目的。
A fuzzy variable structure controller (FVSC) of SVC is designed on the base of the combination of the nonlinear variable structure control theory and fuzzy control theory.
在非线性变结构控制理论与模糊控制理论的基础上，将二者结合起来进行SVC模糊变结构控制器(FVSC)的设计。
This paper introduces a crossroad fuzzy traffic controller based on the fuzzy control theory.
介绍了一种基于模糊控制理论的十字路口模糊交通控制器的设计。
In this dissertation, some control schemes based on gain scheduled and state feedback control theory and PID controller were proposed to control the nonlinear parameter-varying thermal objects.
论文结合增益调度控制方法、状态反馈控制理论和PID控制器设计方法，得到一些适用于非线性热工对象全工况运行的控制方案。
Because of the nonlinear foundation of nonlinear vibration systems, the linear controller used in nonlinear vibration active control based on traditional control theory can not work very effectively.
由于非线性振动系统的非线性本质，基于传统控制理论的线性控制器用于非线性振动控制效果不佳。
The self-adaptive theory is introduced into the control system and parameters of the PID controller are adjusted automatically under the self-tuning PID control law.
把自适应控制理论引入到微驱动器的控制中，在参数自校正PID控制律的作用下，实现了PID控制器参数的自动整定。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
提出了一种用于直流电机调速系统的控制器设计方法，该方法主要基于ITAE最优控制理论，并结合PI控制。
A two-folded sliding modes approach of pneumatic muscle actuator (PMA) position control system was proposed, and the controller was designed by using Lyapunov stability theory.
针对气动人工肌肉位置控制系统，提出了两层滑模的变结构鲁棒控制策略，控制器的推导基于李亚普诺夫稳定性理论。
The linear optimal control theory was applied in designing of controller, and the control gains can be changed to adapt the changes in road input conditions.
控制器的设计仍采用最优控制理论，但控制增益可变，以自适应于路面输入条件的变化。
We create Predictive Model by analyzing system of Semi-Active control. We design the controller of Semi-Active control system, research stability of system with Internal Model control (IMC) theory.
通过对建筑结构的分析研究建立了预测模型，结合内模控制的理论设计了半主动控制系统的控制器、并分析了系统的稳定性。
According to the fuzzy immune PID control theory, a high performance fuzzy immune PID controller based on the single microcomputer control chip has been designed.
根据模糊免疫PID控制理论，设计了基于单片微机控制芯片的高性能模糊免疫PID控制器。
A vehicle handling stability controller is designed using variable structure control theory of sliding mode.
运用滑模变结构控制理论，设计了车辆操纵稳定性的控制器。
A vehicle handling stability controller is designed using variable structure control theory of sliding mode.
运用滑模变结构控制理论，设计了车辆操纵稳定性的控制器。
应用推荐