The process is simple, has easily controlled parameters and high rate of finished products, and can be widely used for industrial production.
本发明工艺简单，参数易于控制，成品率高，可广泛应用于工业生产中。
The optimization matching between the power of electrical source and the action time of magnetic field is a important controlled parameters in order to gain high separation efficiency.
电源功率与磁场作用时间的优化匹配是获得高分离效率的一个重要控制参数。
Tuning parameters, resource management, and logging can differ for each database and can be controlled at the database level.
对于每个数据库来说，调优参数、资源管理和日志会有所不同，并且可以在数据库级别上对其进行控制。
Transactional logging is controlled at the database level through database configuration parameters. The following are parameters that affect transactional logging
通过数据库配置参数在数据库级别上控制事务性日志记录。
Some layout managers are controlled by parameters just on themselves, and others also require additional parameters, LayoutData, specified on each control in the composite they manage.
一些布局管理器只使用它们自身的参数就可以控制，而另一些布局管理器还需要其他参数——Layout Data，该参数是在它们管理的复合控件中的每个控件上指定的。
Locking memory (controlled by the locklist and maxlocks configuration parameters).
锁定内存(由locklist和maxlocks配置参数控制)。
Sort memory (controlled by the sheapthres_shr and the sortheap configuration parameters).
排序内存(由sheapthres_shr和sortheap配置参数控制)。
In AIX 7 (and AIX 6), both parameters are restricted tunables, which means their limits are tightly controlled and limited (see Listing 9).
在AIX7(和AIX6)中，两个参数都是受限的可调参数，也就是说它们的限度是经严格搁置和限制的(参见清单9)。
As for tablets, the parameters to be controlled finally are: weight, hardness, frangibility, disintegration and stripping.
就片剂而言，最终控制的几个主要参数为：片重、硬度、脆碎度、崩解、溶出等。
The main parameters of viscosity, spinning temperature, pressure and winding velocity for coal tar pitch fluid should be rigidly controlled during spinning.
在纺丝过程中，要严格控制煤沥青熔体的粘度、纺丝温度、压力、卷绕速度等主要参数。
The control system can adjust the weights of hybrid neural network and the parameters of controller timely to keep good control performance when the character of controlled plant varies.
当被控对象的特性发生变化时，可对混合神经网络权值及时进行修正并调整控制器参数使控制系统始终保持良好的控制性能。
The pressure parts construction, design criteria of water wall, calculation procedure of water circulation and selection of critical parameters for controlled circulation boiler are introduced.
介绍了控制循环锅炉的结构特点，水冷壁等系统的设计准则，水循环系统设计的计算步骤及设计中关键数据的选取。
The kind and relative content of nitrides in nitrided layer can be effectively controlled through appropriate selection of technological parameters.
合理选择离子氮化温度、气氛氮势和处理时间，能有效控制钛材氮化层中的化合物相的种类和相对含量。
PID parameters are seek to correct valve-controlled motor system., to reflect actual conditions truer dispersed artificial model is set up with valve-controlled motor for the example.
对阀控马达系统寻求PID控制参数进行校正，为了更加真实的反映实际情况，以阀控马达系统为例建立了离散仿真模型。
The model parameters of controlled objects were obtained with relay feedback identification method.
通过继电反馈辨识方法获得被控对象模型参数。
The measuring principle, system composition and measuring error analysis of the computer controlled step shaft multi parameters on line measuring system are introduced.
介绍了微机控制的阶梯轴多参数在线测量系统的测量原理、系统构成及测量误差分析。
Therefore, it is very important to study the mechanism and the related parameters of notched directional splitting controlled blasting.
因此研究切槽定向断裂控制爆破的爆破机理及相关参数，具有十分重要的意义。
All spinning parameters are computer controlled including draft, count, twist direction, twist level, traverse and spindle speed.
所有纺纱参数由电脑控制，包括：牵伸、数、度方向、度水平、复动程和锭子速度。
The paper analyzed the factors affected desilication process, and by orthogonal experiment confirmed the parameters controlled by suitable normal-pressure desilication process.
系统地分析了影响脱硅过程的诸因素，通过正交试验确定了适宜的常压脱硅的工艺控制参数。
The results show that the motion precision can be controlled in the allowable range by choosing the structural parameters correctly.
结果表明，可通过合理选取各种结构参数，使运动精度控制在允许的范围之内。
It puts forward that measuring the three-dimensional geometric data of log surface shape, reappearing log shape and analyzing and managing shape parameters of log is all controlled by computer.
提出将原木表面形状的三维几何数据的检测、原木外形轮廓三维模拟再现以及原木形状参数分析与管理操作过程交由计算机控制完成。
Aim at the controlled object -boiler has nonlinear, parameters instability, and uneasy to establish mathematic model properties, so use the traditional PID control, the control effect is not good.
针对锅炉这种具有非线性、参数不稳定、难以建立精确数学模型的控制对象，采用传统的PID控制，效果不佳。
The results of studies show: the current efficiency, the energy consumption and the size of nickel powder can be controlled by changing the electrolytic parameters.
研究结果表明：可以通过改变电解过程参数实现对电流效率、能耗以及镍粉粒度的控制。
The calculated results indicate that the random wave response of the wave-permeable breakwater can be effectively controlled when proper TLD parameters are selected.
计算结果表明，适当选择tld的参数可以有效地控制透空式防波堤的随机波浪反应。
The change parameters and structure of controlled objects was got form data process module, and then took correspondent measures according to the examination and diagnosis information.
依据测量模块的检测与诊断信息，数据处理模块得知被控对象的结构与参数变化并实施相应控制措施。
Without knowing the precise system model and parameters, the ANN inverse can decouple the controlled system into two SISO linear systems.
在系统精确模型参数未知的情况下，神经网络逆系统可将被控系统解耦成两个SISO线性子系统；
It is pointed out that this deformation can be controlled through optimizing the cutting parameters according to load bearing situation of the part.
根据零件受力性质的不同，通过优化切削参数达到了控制零件变形的目的。
It is pointed out that this deformation can be controlled through optimizing the cutting parameters according to load bearing situation of the part.
根据零件受力性质的不同，通过优化切削参数达到了控制零件变形的目的。
应用推荐