Combining the nonlinear control system theory and the aim of chaos synchronization, we designed a nonlinear feedback controller for synchronizing the scalar output signal of Chua's Circuits system.
把非线性系统的微分几何理论与混沌系统的同步控制目标相结合，设计了蔡氏电路混沌系统的标量混沌信号同步控制的非线性反馈控制器。
The original LSI, which took the formerly complicated CD player and collected the control system and signal processing system circuits into just two groups.
独创的大规模集成电路，将原来复杂的CD播放器和采集控制系统，信号处理系统的电路合并到两路。
In this paper, a graphic edit method of power electronic circuits automatic control system simulation is presented. This paper analyzes the principle and program method of graphic edit.
本文提出了一种适用于电力电子电路自动控制系统仿真软件的图形编辑方法。叙述了图形编辑的原理、设计思想及实现方法。
Built-in power amplifier circuits that can be a small system, and strong signal by cutting the main priority control.
内置功率放大电路，可以单独成为一个小系统，并受主信号强切优先控制。
Also, this paper analyses the system working principle, the design of hardware circuits and the double-mode control algorithm, with the experimental results given eventually.
文中分析了系统的工作原理，设计了硬件电路和双模控制算法。最后给出系统实验结果。
To avoid this problem, the system is designed with two connected circuits: the starter circuit and the control circuit.
为了避免这个问题，启动系统设计有两套电路：启动机电路和控制电路。
Taking concrete chips and practical interface circuits for example, this paper discusses the problems of data preprocessing that generally exist in digital control system.
本文以具体的芯片、实用的接口电路为例，讨论了数字控制系统中普遍存在的数据预处理问题。
The paper introduces major circuits and programming method of numerical feed control system for grinder.
本文介绍了一种磨床数字进给控制系统的主要硬件电路及软件编程方法。
At last, the control system including the drive and protect circuits of the IPM and the current sample circuits and so on are designed.
最后设计调试了永磁电机直接转矩控制系统，包括IPM驱动和保护电路，电流电压采样电路以及转速采样电路等。
Finally, designs brushless DC motor control system hardware circuits based on TI's DSP chip TMS320F2812 and ir's IR2133, and compose the corresponding software.
最后，基于TI公司的DSP芯片TMS320F 2812和IR公司的驱动芯片IR 2133设计了直流无刷电动机控制系统的硬件电路，并编写了相应的软件。
This paper describes some design features of the hydraulic control system for CTJY10-2 jumbo, the anti-jamming system, control principles and operations of some other basic circuits in some detail.
本文阐述了CTJY10 - 2型全液压掘进钻车液压控制系统的设计特点，并详细介绍了防卡钎机构及其它基本回路的控制原理与工作特征。
The system includes a keyboard and LCD circuits, it can control and display the process of the system.
系统含有键盘和LCD电路，可以对系统的过程进行控制和显示。
But to perfect the system performance, some accessorial circuits are necessary, such as automatic power control circuit, automatic temperature control circuit and protective circuit etc.
为了完善通信系统的性能，除了主干电路外，还必须加入一些附加电路，如自动功率控制电路、自动温度控制电路和保护电路等等。
Through a great deal of tests and studies, comparative circuits for the control system of magnetic levitation axletree were chosen to control the levitation in the range of design.
经过大量试验研究，对磁悬浮轴承控制系统中选定比较电路，成功地将悬轴控制在设计范围内。
This paper presents the electrical design solution for the transformer dry system based on SIMATIC S7-200 PLC, and introduces partly design of control circuits and control programs.
提出了基于西门子S7-200PLC的变压器干燥系统的电气设计方案，介绍了部分控制电路及控制程序设计。
On the hardware of the system, parts of control circuit and the design and debugging of peripheral circuits are discussed thoroughly.
硬件方面主要论述了控制电路各部分及外围辅助电路的设计和调试。
The characteristics of structure, the function of pins and the principle of MSC1210 are introduced, and the designs of hardware circuits and software program in CSR Power Control system are given.
文章介绍了MSC1210的结构特点和工作原理，并给出在CSR电源控制系统中的硬件电路和软件程序。
The circuits this system needed to control included LED show circuit, annunciator circuit and the circuit to control microwave machine.
本系统所需控制的电路包括LED显示电路、声光报警电路及微波器控制电路。
Aimed at a kind of wing control system, a software method that digital control hydraulic servo circuits were calibrated was proposed to improve system's reliability and maintainability.
本课题以某型舵机控制器为研究对象，设计了一种数字控制液压伺服回路校准的软件实现方法，提高了系统的可靠性和可维护性。
Simulation about MPPT is also carried out and its results explain that the control strategy designed for the former BOOST circuits of this system can track the max power point effectively.
对改进型最大功率跟踪策略进行了仿真，结果表明，该控制策略在本系统设计的前级BOOST电路中可以有效地跟踪太阳能最大功率点。
Stability of the system, its advantages are simple hardware circuits, software functions, control system reliability, high cost performance and have certain practical and reference value.
本系统运行稳定，其优点是硬件电路简单，软件功能完善，控制系统可靠，性价比较高等，具有一定的实用和参考价值。
The system hardware architecture is divided into control, drive, power supply, display five blocks circuits, and magnetic coupling is used to isolate circuit boards.
系统在硬件结构上分为控制、驱动、电源、显示、电压转换五大模块电路，各电路板之间采用磁耦进行隔离。
The system with two control circuits separately for tested engine and dynamometer could conduct engine test automatically.
该系统能够对柴油机进行全自动测试，它具有柴油机和测功机两个控制回路。
DC power supply is mainly provide constant voltage power supply for control circuit, driver circuit and a variety of protection circuits and allows the system to work properly.
直流稳压电源主要是用于对系统中的控制电路、驱动电路以及各种保护电路提供恒压电源，使得系统能够正常工作。
Using TMS320F2812 as the core of the control system, drive circuit, sampling circuit, protection circuits, man-machine interface circuit hardware components and control system software were designed.
以TMS320F2812为控制核心，设计了系统的控制驱动电路、采样电路、保护电路、人机接口…更多电路等硬件部分和控制系统软件。
The system bandwidth of conventional voltage-control-mode motor driver circuits is limited by the intrinsic frequency of the load, and its phase lag is also load-dependent.
传统电压控制模式的电机驱动电路系统频率都受电机的本征频率制约，其相位延迟会随负载的变化而变化。
This article introduces the principle, structure and related electric circuits of the Argon flow control system.
文章介绍了氩气流量控制系统的原理、结构及相关的电路。
Based on the present fire protection code, optimizes control circuits of smoke control and extraction fans and pressurization fans, in order to increase the reliability of the system.
根据现行消防规范，对消防排烟风机、正压风机控制电路进行了优化，以提高系统的可靠性。
On the basis of compactibility theory, the device, circuits and programs of the microcomputer control compactibility system are designed and made by using 8031 single-chip microcomputer.
本文以紧实率为理论依据，以803 1单片机为主机，对型砂紧实率自动控制系统的机构，电路，及程序进行了设计和研制。
The result shows that the circuits involved ensure the reliability of the signals, and basically satisfy the requirement of the control system.
结果表明，所涉及电路能够保证信号的可靠性，并能够基本满足控制系统对电路的要求。
应用推荐