Introducing system formation and control principle of FDY high speed spinner.
介绍FDY高速纺机的系统构成及控制原理。
The system components and automatic control principle and effects are introduced in this paper.
文章详细介绍了系统的组成及自动化控制原理和控制效果。
Presents the control principle of electromagnetic bearing and the requirements of the power drive circuit.
介绍了电磁浮轴承的控制原理及对功率驱动电路的要求。
Study on the control principle and the algorithm of SVPWM, and analyse of the two control methods of SVPWM.
对SVPWM的工作原理和控制算法进行了研究，并分析比较了它的两种控制方式。
This paper analyzes the flying saw control principle by use of programmable control block and ladder diagrams.
分析了采用可编程序控制器控制飞锯机的原理，给出了飞锯机控制程序框图及梯形图。
Based on character of water level in steam generator, control principle of height of water level is researched.
从蒸汽发生器的水位特性出发，对其水位高度控制原理进行了深入细致的研究。
The control principle of airspeed keeping, altitude keeping, course keeping and swerve control is analyzed, too.
进行了空速保持、高度保持、航向保持和转弯控制等控制律的详细分析。
The component parts and control principle of pulsed SAW inverter power source are mainly introduced in the paper.
本论文主要介绍了所研制的单片机控制逆变埋弧焊机的组成结构和控制原理。
The architecture, content organization and teaching method for the course of automatic control principle are discussed.
探讨了《自动控制原理》课程的体系结构、内容组织和教学方法。
This paper mainly expounds the chart of the primary control principle of the electrical control system and its features.
文章主要阐述了电气控制系统的主要控制原理线路图及其特点。
This paper content is the basic research about stress control principle and its application in surrounding strata in stope.
本课题的内容是应力控制方法在采场围岩控制中应用的基础性研究。
The application of automatic control principle to the design of such a source makes the required amplitude stability possible.
应用自动控制原理来设计这种恒流源，可以获得必要的幅度稳定性。
This paper introduces briefly the structure, hydraulic system and control principle of a testing twin plunger hydraulic evelator.
本文对双缸液压电梯的结构形式、液压系统和控制原理作了简要分析。
The frequency control principle is discussed, and the designing circuit and test result given, which prove that the solution works.
本文讲述了频率控制原理，给出了实现电路和测试数据，证明了此方法是可行的。
A general introduction was made on effect, control principle and PLC logic control of the loop control system in high speed rod rolling.
概述活套控制系统在高速线材轧制中的作用、控制原理、PLC逻辑控制及活套调节对精轧机和夹送辊、吐丝机之间张力的影响。
The structure, control principle and main part design features are introduced for precision rolling machine of the tapered bearing ring.
介绍了圆锥轴承套圈精密辗扩机的结构、控制原理及各主要组成部分的设计特点。
This text mainly introduced its system structure and functions, and to now the control principle of the unit carried on the elucidation.
本文主要介绍了其系统结构以及功能，并对现地单元的控制原理进行了说明。
Control principle, control tactics, control logics and algorithm of motor vehicle dynamics stability control are theoretically analyzed.
对车辆动力学稳定性控制的控制原理、控制策略、控制逻辑和算法进行了理论分析。
By a simple Fourier analysis, this paper introduces how to design a direct torque controller according to fuzzy logic control principle.
用傅立叶分析，把变频调速原理引入直接转矩控制中，并在此思想指导下设计了模糊速度控制器，大大简化了系统设计和计算。
This paper introduces the revolution control principle of powdered coal metering valve for MAERZ vertical kiln and its program flow chart.
本文介绍了迈尔兹竖窑煤粉计量阀转速的控制原理，并给出了其程序流程图。
Firstly, the paper introduce the process of design the UAV AFCS, which use the test of model fly to confirm the control principle parameter.
本文首先介绍了无人机飞控系统的设计过程，采用模型飞行试验进行控制律参数设置与确定。
The point in the paper discussed is the fuzzy controller for boiler, fuzzy control principle on gas regulating valve is researched in detail.
文章重点讨论了燃气热水锅炉模糊控制器的设计，对燃气调节阀的模糊控制原理进行了详细研究。
The article introduce structure, design calculation and control principle of preheater in Hight atmospheric molecular distillation equipment.
本文介绍高真空分子蒸馏设备中预热器的结构、设计计算、控制原理。
The design of hardware and software for the automation of wood drying technology, system function as well as control principle are introduced.
介绍了利用计算机实现木材干燥工艺自动化的软、硬件设计、系统功能、控制原理等。
The control principle of the vacuum freeze drier with a computer and PLC is introduced, and the composition of the hardware and software are presented.
介绍了用计算机和可编程序控制器(PLC)对真空冷冻干燥机控制的原理，以及硬件和软件的组成。
And according to the mathematical model, vector control principle and minimal direct axis current control and its digital realized method were discussed.
结合数学模型，讨论了有关矢量控制的原理和直轴电流最小控制的数字实现方法。
The control principle and particular method of vibration stimulated by itself were researched according to the forecasting based on specific machine tool.
针对具体机床，论述了运用预测控制方法进行自激振动控制的原理及具体实现方法。
It introduces automatic control, secure protection, control principle, how to realize in electric power driving system and the function of secure protection.
本文介绍了电力拖动系统的自动控制和安全保护，电力拖动系统的控制原理及实现方法，安全保护的作用。
Introduced the system software and hardware design, function, control principle and operation of computer full automatic control system of steam lumber kilns.
介绍了蒸汽式木材干燥窑计算机全自动控制系统的软、硬件设计、系统功能、控制原理及系统使用方法。
This paper introduces flexible control principle of digital control flying saw, analyses its flexible control technique in all move section of one saw period.
介绍了数控飞锯柔性控制原理，分析了数控飞锯一个锯切周期各运动段的柔性控制技术。
应用推荐