Various control modes of power feeder automation technology are analyzed.
分析了各种馈电线自动化技术的控制模式。
Offline and online control modes for operation, convenient and practical.
拥有脱机和联机两种操作模式，方便实用。
It can be divided into two control modes: constant voltage and adjustable voltage.
其工作方式分为定电压和可调电压两种控制形式。
In view of this, analyses are made of relevant control modes, and solutions are put forward.
通过对其控制模式的分析，提出解决方案。
Moreover, centralized control and distributed control modes on snake like robot is performed too.
在此基础上完成了蛇形机器人的集中式控制和分布式控制方式。
The core of this thesis is to research management control modes of parent company and subsidiary company.
本文研究的核心是母子公司管理控制模式。
Experience each one's unique driving sensations through 2 control modes including touch and motion detection.
每一个独特的驾驶经验，通过控制方式，包括知觉接触和2运动检测。
The article describes a soft starter suitable for high power motor, its control circuit and different control modes.
介绍了适用于大功率电机启动的软启动器及其控制电路和不同的控制方式。
Timing mode control is a kind of control modes of the Mill Pacing Control (MPC)model for Bao Steel 1580mm hot rolling mill.
定时方式控制是轧制节奏控制（MPC）模型的控制方式之一。
The energy saving effect of several control modes was contrasted in variable primary flow chilled water system under partial flow.
比较一次泵变流量系统部分流量下不同控制方式的节能效果。
This paper presented a modeling of the static synchronous series compensator (SSSC) with multi-control modes for power flow analysis.
给出一个具有多控制功能的静止同步串联补偿器(SSSC)电压源模型。
This paper introduces the circuits and their respective working principles of different control modes for automobile charging indicators.
介绍汽车充电指示灯不同控制方式的电路及其工作原理，充电指示灯故障判断以及引起误判断的原因。
Based on design case study, the article analyzed the design method of the fire roller shutter and its control modes in high-rise buildings.
通过工程设计实例，分析了高层民用建筑中防火卷帘及其电控方式的设计方法。
The utility model can also provide two control modes of a manual mode and a full automatic mode, wherein the two modes are freely switched.
本实用新型还提供二种控制方式：手动模式及全自动模式，且可自如切换。
These two control modes can be applied to real projects, and are helpful to optimize the performance and thrift energy of the cooling towers.
这两种控制模式可以应用于实际的工程中，有利于冷却塔性能的优化和节能。
SCM and PLC, which are wildly used in industrial controlling machines, can be programmed to realize different kinds of complex control modes.
SCM和PLC可以通过编程实现各种复杂的控制要求，成为应用广泛的工业控制机。
Maintaining constant water levels at sluices and controlling water storage capacities of all channel reaches are the most suitable control modes.
闸前常水位和控制容量方式是中线最合适的控制方式。
The article introduces the steering control modes for multi - wheel systems of sports utility vehicle, truck, multi - axle heavy - duty trucks etc.
介绍了适用于多功能运动型车、卡车、多轴重型车等大型车辆的多轮转向系统的转向控制模式。
Taking MIG welding as example, under each control modes, the welding parameters such as the welding current, welding voltage, pulse frequency, etc.
以铝合金MIG焊为例，在每种脉冲模式下，分别改善焊接电流、焊接电压、脉冲频率、占空比等参数进行焊接并采集输出电流波形。
At present, laser-marking controller mainly have two control modes, one adopts PC control, the other adopts SCM (Single ChipMicrocomputer) control.
目前，激光打标控制器主要有两种控制方式，一种采用微机(PC机)控制，一种采用单片机控制。
The principle and composite of the control system is described and the motion control modes are stated. At last, a set of experiment data is presented.
本文主要是从试验台的运动控制系统出发，介绍试验台的运动控制方式、组成及控制原理，最后给出了一组实验数据。
Three variable volume control modes in central air-conditioning, press difference control, temperature difference control and load control are analyzed.
对中央空调系统的三种变流量控制方式压差控制、温差控制、负荷控制进行分析。
This paper analyses the basic principles and control modes of DC/DC converter, which is the theory guidance of the design and the implementation of XD1124.
论文系统地研究了DC/DC转换器的工作原理和控制模式，为XD1124的设计提供了理论指导。
This paper designs the main circuit of the recharger, control methods under different charging ways, and does experimental analysis for different control modes.
本文设计了充电机的主电路，并设计了不同充电方式下的控制方法，同时针对不同控制方式进行了试验分析。
In order analyze and design the power supply system, the system models which control by two above-mentioned control modes are established and analyzed by computer.
为了进行电源系统分析和设计，本文建立了电压模式和峰值电流模式控制的逆变弧焊电源数学模型，并用计算机进行分析。
The utility model has the advantages of achieving full automation conveniently, combining multiple control modes into a whole and obtaining the best drying effects.
可方便地实行全自动控制，把多种控制方式结合在一起，以达到最佳的晾晒效果。
And according to the installation of ventilating engine and illuminating lamps concrete requirements and process are elaborated and devices control modes are proposed.
就隧道供配电系统进行了说明，针对通风机照明灯具的安装要求及过程进行了阐述，并提出了设备控制方式。
Three control modes have been worked out, such as time-control, deformation-control and power-peak control. Each model realizes automatic control in linear friction welding.
采用时间控制、变形量控制和功率峰值控制三种控制方式实现了焊接过程的自动控制。
The results of practical analysis show that the strength of AC busbar at inverter side and various control modes of inverter station impact the characteristics of SSO evidently.
实际分析表明，逆变侧交流母线的强弱以及逆变站不同的控制方式对次同步振荡阻尼特性有显著影响。
The results of practical analysis show that the strength of AC busbar at inverter side and various control modes of inverter station impact the characteristics of SSO evidently.
实际分析表明，逆变侧交流母线的强弱以及逆变站不同的控制方式对次同步振荡阻尼特性有显著影响。
应用推荐