This paper discusses various jamming sources and their coupling forms among a real-time control microcomputer system.
本文较详细地介绍了微型机实时控制系统中的各种干扰源及其耦合方式。
The radio remote control microcomputer system developed for GK_1 locomotive consists of the radio remote controller, main controller, fuel metering system and panel-display.
介绍了一种可编程无线电遥控多通道开关系统的设计方法，详细阐述了其组成结构和工作原理。
On this base, the closed - loop control method of hybrid step motor using the harmonic back EMF is investigated, and the microcomputer control system of step motor is designed.
在此基础上研究了利用谐波反电势信号实现混合式步进电动机闭环控制的方法，设计了步进电动机的微机控制系统。
This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
A scheme is proposed to take the display of monitor device or microcomputer control system as the redundancy of the other for efficiency use of existing resources.
为了更有效地利用机车上的现有资源，提出监控装置和微机控制系统的显示器互为冗余的实现方案。
The paper presents the control strategy of the microcomputer with knowledge base, and describes the software and block diagram of work of the two-stage microcomputer control system.
本文给出了带知识库的微型计算机控制策略，介绍了两级微机控制系统的软件和工作框图。
In this article, it is proposed that TDW905N controllable retarder, applied with microcomputer speed control system, is much suitable for automation improvement of small and middle Marshalling Yard.
本文提出TDW905N可控减速顶辅与微机速度控制系统，非常适合中、小能力驼峰编组场的自动化改造。
For the manufacture of electric motor winding an imported microcomputer control system is adopted, to make the winding more accurate and more efficient.
电机绕组制作时，采用进口微电脑控制系统绕制，使绕组更加精确，效率更高。
This paper introduces a practical dynamic rail weigher auto - weighing system by microcomputer control.
本文介绍一种实用的微机控制动态轨道衡自动称重系统。
This paper describes a microcomputer compound control system for single phase resistance-heated furnace based on power and temperature regulations with uniform distribution and zero trigger.
本文介绍一个单相电阻炉均布式零触发调功调温的微机复合控制系统。
Panel with hardened, PLC microcomputer control, automatic tension control system more stable.
面板采用硬化处理，PLC微电脑控制，自动张力控制系统运行更加稳定。
This paper introduces the hardware and the software of microcomputer control system for sign typewriter on the railway vehicle bearing.
本文介绍铁道车辆轴承标牌打字机的微机控制系统的硬件结构和软件特点。
In accordance with the designed lightning protection of microcomputer control system of communication station, it discussed the basic modern lightning protection techniques of microelectronic devices.
针对为某通信站微机控制系统所设计的雷电防护措施，对微电子信号设备的现代雷电基本防护技术加以讨论。
The detector based on virtual instrument is proposed to ensure the control performance of microcomputer control system for diesel locomotive.
为了保证内燃机车微机控制系统的控制性能，提出采用基于虚拟仪器的检测装置。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
In this paper, the architecture and working principle of a microcomputer control system called JDWL for railway interlocking are introduced.
研究了车站微机联锁控制系统的结构、工作原理、安全性可靠性设计及其特点。
This paper presents the application of multiwire technology in the microcomputer control system of automobile running-in test.
介绍了多线程技术在汽车磨合检测微机控制系统中的应用。
This system consists of five parts: heating furnace with circulation cooling device, detection system, temperature control system, microcomputer and printer.
系统由具有循环冷却装置的加热炉、检测系统、温度控制系统、微型计算机和打印机五部分组成。
This paper deliberates some technical Problems about multi microcomputer distributed drive control system.
本文研讨了多微机分布式传动控制系统中的几个技术问题。
Carburizing and nitriding processing microcomputer control system is introduced, and heat treating technological tests are presented.
介绍渗碳、氨化过程工艺参数的微机控制系统以及热处理工艺考核试验。
Introduces the microcomputer control system using in the hydraulic resistance test of locomotive, puts forward the design proposal of data acquisition and process control.
介绍了一种专门用于机车的水阻试验微机控制系统，提出了数据采集及过程控制设计方案。
And on the basis of the original microcomputer control system, the intelligent vehicle diagnosis system has been formed.
并在原有微机控制系统的硬件基础上，构成智能化车载诊断系统。
This paper introduces a computer system of temperature control device by using a single chip microcomputer as an intelligent unit .
本文介绍一种以单片机作为智能单元的计算机温度控制装置。
This method is suitable for the microcomputer control system especially, in which the multi-parameter is changeable frequently.
此方法适用于多参数标准值经常变化的微机控制系统中。
The Chinese patent PSB microcomputer control system condenser pumps series products.
中国专利PS B微电脑控制系统冷凝器排水泵系列产品。
Under the control of the microcomputer this system not only can automatically determine the optimal control pulse sequence of the step motor, but also can control the step motor optimally.
在微机的控制下，该系统既能自动确定步进电动机的最优控制脉冲序列，又能对步进电动机实施最优控制。
SBC and the host computer has, microcomputer control system programmable control and processing at the same time.
主机有单板机及微机，微机控制系统可编程与加工控制同时进行。
This paper introduces the automatic drilling principle, the hardware composition and software program in the windlass percussive drilling by the microcomputer control system.
介绍了卷扬式冲击钻进过程中，微机控制实现自动钻进的基本原理、硬件的组成和软件的设计。
Control and examine: adopt microcomputer control system, electronic let-off, electronic weft selecting, automatic wefting, self-check, LCD ect.
控制与检测：采用微电脑控制系统，具有电子送经电子选纬，自动寻纬，故障检测，液晶显示等功能。
Control and examine: adopt microcomputer control system, electronic let-off, electronic weft selecting, automatic wefting, self-check, LCD ect.
控制与检测：采用微电脑控制系统，具有电子送经电子选纬，自动寻纬，故障检测，液晶显示等功能。
应用推荐