When designing the signal control intersection, people often overlooked the influence of right-turn traffic.
在进行信号控制道路交叉口设计时，人们往往忽略了右转交通流的影响。
Methods Using the fuzzy control rule of accurate estimated intersection delay to control intersection signal lamp will reduce the time vehicle delay on intersection effectively.
方法通过对车辆在交叉口延误时间的估算，制订模糊控制规则来控制交叉口的信号灯，能有效地减少车辆在交叉口的延误时间。
We design a novel multi-phase fuzzy traffic control arithmetic for single intersection.
设计了一种针对单交叉口的新的多相位模糊交通控制算法。
The programs can be changed during the day. Usually standard intersection control programming environments should be used.
一天之中，程序还能被修改。一般来说，应使用标准的交叉控制编程环境。
This paper presents single intersection signal control method based on multi-sensor information fusion technique.
本文介绍了基于多传感器信息融合技术的单交叉口信号控制方法。
The phase design of intersection signal control is the first problem to solve in intersection automation design, directly affecting the control project.
相位设计是信号控制交叉口进行配时设计时需要首先解决的问题，直接决定着控制方案的效果。
In order to study adaptive traffic signal control method, intersection delay should be carefully analyzed and calculated.
为了研究交通信号的自适应控制方法，需要对交叉口延误进行定量的分析与计算。
In this paper, the characteristics and advantages of neuro fuzzy intelligent control algorithm, which is an intersection of neural networks and fuzzy logic, are studied.
研究了将神经网络与模糊逻辑融合交叉而形成的神经网络-模糊智能控制算法的特点和优越性。
Time control or adaptive control were chosen by judging the traffic intensity at the intersection.
判断交叉口的交通强度，选择定时控制或自适应模糊控制。
The paper introduces the design of a new integrated embedded intersection control system.
介绍了一种嵌入式综合的交通路口控制系统的设计。
These options control theoretical piping bend intersection!
这些选项控制理论管道折弯交截！
It is widely used in channel control surveying to define the coordinates of unknown points by ranging intersection for setting free-station of total station.
利用全站仪自由设站测边交会确定待定点的坐标，在航道控制测量工作中得到较好的应用。
A novel general multi-phase signal control method was presented based on the idea of object - (oriented) design to increase the efficiency of intersection signal control.
为提高城市道路交叉路口信号控制的效率，采用面向对象的设计思想，提出了一种新的通用多相位信号控制策略。
A hierarchical adaptive fuzzy control system for an isolated urban traffic intersection is proposed, and an evolution strategy is used to modify the fuzzy membership functions of the system.
提出一种面向城域单交叉路口的自适应分级模糊控制系统，采用进化策略对分级模糊控制器的模糊隶属度函数进行离线优化调整。
Using the decentralized control method, the intersection problem of compensating spectra and closed-loop spectra is considered.
本文使用分散控制方法，讨论并解决了控制系统的补偿谱和闭环谱的相交性问题。
According to the characteristics, one kind of system was described that used real-time fuzzy and the timed control to carry out the dynamic control of the multiphase signal of isolated intersection.
针对这一特点，介绍了一种采用实时模糊和定时控制对单交叉口多相位信号进行动态控制的系统，并提出了一种改进的单交叉口多相位信号实时配时模型。
Aim With intersection delay as fuzzy input, to put forward a new method of traffic fuzzy control system.
目的提出以车辆在交叉口延误作为模糊输入的交通信号模糊控制策略。
Moreover, Space setting methods and time control technologies of BRT intersection priority are expounded completely. And also, the setting principle of BRT ticket system is studied in the paper.
系统阐述了BRT路口空间优先设置方法和时间优先控制技术，并对BRT系统的票制设置原则进行了研究。
In order to optimize the coordinate signal control paraments, intersection delay should be carefully analyzed and calculated.
为了对干线交叉口信号协调控制参数进行优化，需要对交叉口延误进行定量分析。
Prediction of traffic queues at signalized intersection provides important information for traffic signal control and management.
预测信号交叉口的排队长度可以为交通信号控制和管理提供非常重要的信息。
In modern times, the intelligent control of urban traffic is an important part of ITS. The intersection ACTS as the key factor in deciding the road traffic.
现代城市交通的智能控制是ITS的重要组成部分，而交叉口是决定道路通行顺畅的关键。
The results show that this method can effectively decrease the average delay in the intersection and is superior to a traditional vehicle actuated control method.
仿真结果表明，该方法能有效降低通行车辆在交叉口的平均延误，优于传统的感应控制方法。
The signal control of the isolated intersection has two basic parameters: the cycle length and the green split.
单交叉口的信号控制的基本参数有两个：周期时长和绿信比。
Then, the calculation method of the basic elements of intersection signal control is proposed which included amber time and inter green time.
研究了有轨电车运行条件下的交叉口信号控制基本参数确定方法。包括黄灯时间、绿灯间隔时间。
Intelligent traffic controlling machine is an equipment used in the street intersection to control vehicle flows.
智能交通信号控制机是用来控制交通路口信号灯转换的设备。
Next, the paper introduces the classifications and methods of traffic signal control, and stresses the main parameters and the estimation indexes of the signal control of isolated intersection.
紧接着介绍了交通信号控制的分类、方法，并着重讨论了单交叉路口信号控制的主要参数和评价指标。
As the coal mining grows deeper and deeper, the control of the stability of the rock mass at the intersection points in great depth has become a difficult issue.
随着煤矿采深的不断加大，深部软岩交岔点稳定性控制已成为煤矿开采的又一难题。
This paper presents a new fuzzy control method, which is used in urban traffic intersection control.
提出了一种适应于交通状况复杂的城域单交叉口模糊控制方法。
The research is focused on the calculation of intersection signal control elements, isolated independent signal priority control of streetcar, coordinated signal priority control of streetcar.
论文研究的重点为有轨电车交叉口信号控制参数确定方法、交叉口单点在线优先控制方法、离线协调优先控制方法。
The research is focused on the calculation of intersection signal control elements, isolated independent signal priority control of streetcar, coordinated signal priority control of streetcar.
论文研究的重点为有轨电车交叉口信号控制参数确定方法、交叉口单点在线优先控制方法、离线协调优先控制方法。
应用推荐