The axis attribute allows you to specify the layout orientation, either along the X-axis or the Y-axis, while the spacing attribute allows you to control the spacing between components.
axis属性可用于指定布局方向，它的值可以是x - axis或y - axis，而spacing属性可用于控制组件之间的间距。
Then, base on the problem of attitude control of a satellite under development, we design a NN compensation controller for high accuracy orientation phase.
然后，基于某型小卫星的姿态控制问题，设计了高精度定向阶段的神经网络补偿控制器。
When the estimated speed converges to the actual rotor speed, the rotor flux observed converges to its true value, which can be used in direct field orientation control (DFOC).
当电机转速的估计值收敛于转速的真实值时，观测的转子磁链也收敛于其真实值，可将其用于直接磁场定向控制中。
The influence of value chain management theory should be considered when an analysis is made on the connotation and objective orientation of internal control.
分析内部控制的内涵及确定其目标定位需要考虑价值链管理理论的影响。
In wind power system, a vector control strategy using rotor induct electric potential orientation for doubly fed generator was proposed.
针对风力发电系统中的双馈电机提出一种转子感应电势定向矢量控制方法。
Through the analyses of results of simulation, the solution about head wind control is presented that GPS orientation technology and the measured data of velocity should be adopted.
并通过对仿真结果的分析，提出在系统着陆期间利用GPS定位和测速数据实行逆风控制的方案。
So manufacture schedule and control of supply enterprises becomes an important orientation for study.
而相应的配套企业的生产计划与控制问题成为一个重要的研究方向。
In an induction motor field orientation vector control system, the rotor time constant may be deviated due to motor temperature variation and flux saturation.
本文在异步电动机矢量控制系统中提出了一种基于转子磁场定向的转子电阻自适应辨识方法。
PLC used Pulse Output Function to control the stepper motor speed, direction and distance of movement, accordingly realizing the purpose of exact orientation.
利用可编程序控制器脉冲输出指令控制步进电机的转速、方向和移动距离，从而实现精确定位。
As to demands of automatic position control system, a model of system mathematics was set up. Control algorithm of precise forging machine orientation is studied.
针对位置自动控制系统的要求，建立了系统数学模型，研究了精锻机控制系统的定位控制算法。
The spiral crystal is just like a straight crystal bar with definite orientation coiled on a cylindrical surface. It is not formed spontaneously, but is formed under control.
这种螺旋晶体就像一根具有一定取向的直晶棒被弯曲盘卷在一个圆柱面上，它不是自发地而是受人工控制形成的。
In rotor flux orientation control, rotor time constant T2 is a key issue of high performance vector control technology.
在转子磁场定向异步电机矢量控制系统中，正确的转子时间常数是高性能矢量控制系统的关键。
Visual servo system can be used in the control systems of robot original orientation guiding, obstacle avoiding, trajectory tracking and moving object tracking, etc.
视觉伺服可以应用于机器人初始定位自动导引、自动避障、轨线跟踪和运动目标跟踪等控制系统中。
It discusses the influence of ground control network, underground traverse survey, shaft orientation and gyroscopic orientation edge append-survey on breakthrough precision.
分析了地面控制网、井下导线测量、立井定向和加测陀螺定向边对贯通大型巷道精度的影响；讨论了提高测量精度的可行性方法。
Test result shows the digital control method of system is simple, and has high precision orientation.
实验证明：其数字式控制方法简便，位置定位准确，控制精度高。
In order to carry out dynamic task scheduling effectively, the method of name and orientation is provided for tasks of distributed measurement and control system.
为了有效地实施动态任务调度，需要对分布式测控系统中的每一个任务进行命名与定位。
With the engineering survey control network, authors made a high precision orientation, measuring and control to basement, mine gallery wall of CSR beam loop by polar coordinates with total station.
采取工程测量控制网，对冷却储存环“S”形束流环的基础、坑道墙，采用全站仪按极坐标法进行高精度定位、测控。
According to the flux acceleration principle, the influence of rotor parameters on the performance of vector control system with rotor flux orientation is analyzed.
根据磁场加速法原理，在理论上定性地分析了电机转子参数对矢量控制系统性能的影响。
Special control and measurement software, able to test tooth form and tooth orientation and to estimate numerical value automatically.
专用控制测量软件，测量齿形、齿向并可以自动评估数值。
Secondly, the method to plan and arrange production belongs to control in experience orientation; therefore the contraction between supply and demand isn't likely to be solved.
二是生产计划、排产的方法属于经验型控制，供需矛盾得不到很好的解决。
A high precision control system of worktable is the important part in modern advanced microscopic system, its re-orientation accuracy affects the sample observation quality of microscope directly.
高精度工作台控制系统是现代自动显微系统的重要组成部分，其精度直接影响显微镜对样品的检测质量。
In this paper, several main ways of dust and poison control with surfactant in mine are comprehensive expounded, and the study orientation of surfactant used for the domain is explored further.
对表面活性剂用于矿山尘毒治理的几种主要途径进行了综合阐述，并进一步探索了表面活性剂在该领域应用的研究方向。
Formulate annual training plan and orientation training plan according to each department demand, and carry it out, and write out training report, keep and control training files;
根据各部门需求编制并执行年度培训计划和入职培训计划，撰写培训总结报告，管理培训档案；
Because cross-coupling control is advantageous to restricting and harmonizing between multi driving wheels, it can reduce orientation error and improve the accuracy of path tracking effectively.
由于交叉耦合控制利于多轮驱动之间的制约和协调，可以有效减少方向误差和提高路径跟踪的精确性。
There exists school differences of learning goals orientation, learning capability self-efficacy and locus of control among LD students;
学业不良学生之间，其学习目标定向、学习能力自我效能感和心理控制源存在学校差异；
This paper presented a methodology and algorithm of tool orientation control for 5-axis sculptured surface CNC machining.
针对复杂曲面的五轴加工，提出了一种刀具方向控制的方法，并给出了相应的算法。
An orientation method for global control points based on ray intersecting is proposed.
提出了一种基于光线交汇约束的全局控制点定向方法。
The control system sends out impulse dictates to drive three-coordinate manipulator with injection-gun to finish the accurate position orientation.
控制系统发出脉冲指令驱动三坐标机械手，带动注射枪完成定位加注。
In this paper, a control method of axis ratio and grain distribution of hexagonal ferrite is introduced, and improvement of sintered magnet orientation is discussed.
介绍了一种六角晶系铁氧体轴比及晶粒均匀性的控制方法，并对烧结磁体取向度的提高作了讨论。
The paper gives the vector control speed system of the double-fed machine on the rotor current orientation.
为此我们确定双馈电机调速时的矢量控制策略即转子电流定向的矢量控制。
应用推荐