The existing cooling ability of bloom continuous casting mold at PZH Steel was evaluated, then, the mold cooling process was optimized.
在分析攀钢大方坯连铸现行结晶器冷却能力的基础上，优化调整了结晶器冷却制度。
The multiple versions of EMS in the continuous casting of flat products are reviewed and classified with respect to liquid steel flow pattern and metallurgical results.
回顾了电磁搅拌应用于扁平产品连铸生产中的各种形式，并按液态钢水流动形态和冶金效果给予分类。
KME set milestones in the development and production of copper moulds for the continuous casting of steel.
KME在开发和生产连续铸钢用的铜模件方面树立起一座里程碑。
There are four types of the cloggings in the submerged nozzle for continuous casting. They are, namely, deoxidation products, solidified steel, complex oxides and reaction products.
连铸水口堵塞的类型有四种，即脱氧产物、固态钢、复杂氧化物及反应产物。
Soft contact electromagnetic continuous casting is a new type method for continuous casting technique which main used in the cast of steel and have been developed greatly now.
软接触结晶器电磁连铸方法是一项新的连续铸造技术，主要用于钢的连续铸造过程，目前已取得了较快的进展。
Soft contact electromagnetic continuous casting is a new type method for continuous casting technique which main used in the cast of steel, aluminum and have been developed greatly now.
软接触结晶器电磁连铸方法是一项新的连续铸造技术，主要用于钢、铝的连续铸造过程，目前已取得了较快的进展。
Remarkable effects have also resulted in stabilizing continuous casting production, regulating steel composition and temperature as well as reducing steel or stopping the increase of inclusions.
在稳定连铸生产、调整钢水成分和温度，以及不增加或少增加夹杂物等方面，均取得了明显效果。
The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould at Pan steel slab castor No.
从结晶器施加电脉冲输入能量、钢液过热度、电极间距三方面，探讨电脉冲处理提高铸坯等轴晶率的效果。
This paper analyzes the influence of calcium treatment on the castability of continuous casting molten steel.
分析讨论了钙处理对连铸钢浇注性能的影响。
This paper presents a study of the core component of a continuous casting machine which marks the ability of a country to make steel.
本文对直接标志一个国家钢产量能力的连续铸钢机的核心部件进行了研究。
After all, the choice and control of continuous casting process parameters are also different during continuous casting different steel grade.
由此，在连铸不同钢种时，连铸工艺参数的选择与控制的重点也各不相同。
The key technologies, such as M-EMS, secondary cooling scheme, and dynamic soft reduction, and its application to bloom continuous casting for heavy rail steel were presented.
简述了攀钢大方坯连铸结晶器电磁搅拌技术、二冷控制技术和凝固末端动态轻压下技术在重轨钢连铸中的应用效果。
The key technologies, such as M-EMS, secondary cooling scheme, dynamic soft reduction, and its application to bloom continuous casting for heavy rail steel were presented.
简述了攀钢大方坯连铸结晶器电磁搅拌技术、二冷控制技术和凝固末端动态轻压下技术在重轨钢连铸中的应用效果。
Molten steel level in mould of continuous cast process and casting speed can directly effect temperature of molten steel in mould.
结晶器液位和铸坯拉速可直接影响结晶器内钢液温度。
Using flow field software PHOENICS and water model, this paper describes the flow field of molten steel in continuous casting billet mold.
应用流场计算软件PHOENICS及水力模型，模拟了方坯连铸结晶器内钢液的流场和流动分布。
The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。
It is found that the 'delamination always takes place along the centerline segregation band in pipe-line steel produced by continuous casting and then controlled rolling.
初步研究发现，对由连铸然后经控制轧制生产的管线钢层状撕裂几乎总是沿中心线偏析带发生。
Therefore, the mathematic expression of deformation resistance of 304 stainless steel strip continuous casting was obtained according to the model built.
因此，根据建立的计算模型得到了薄带连铸304不锈钢的变形抗力数学表达式。
The molten steel temperature is one of important parameters of continuous casting process.
连铸钢水温度是连铸生产工艺的重要参数之一。
During continuous casting of high aluminum steel, composition and properties of mold fluxes change obviously due to the slag-steel reaction.
高铝钢连铸过程中，钢渣反应将导致连铸保护渣成分和性能发生较大的变化。
Properties of mold powder used in continuous casting were analyzed. Optimum matching of the powder properties, steel grade and operation conditions is discussed.
对结晶器保护渣的性能作了描述；对结晶器保护渣的性能与工艺条件、钢种的优化匹配进行了探讨。
By analyzing the instantaneous parameters of molten steel leakage during continuous casting at Lianyuan steel, main reasons to cause the leakage were found.
通过分析涟钢过程中的瞬间参数，找出了漏钢的主要原因，即中间包温度过高、拉速过大以及操作不当等。
The heat transfer of steel fluid in continuous casting mould is a stable process and can be depicted with three-dimensional stable heat conduction equation depending on tension speed.
连铸结晶器内钢液的传热可视为一个稳态过程，可用依赖于拉坯速度的三维稳态热传导方程描述。
The experimental study on control of nitrogen in liquid steel during EAF melting, LF refining and continuous casting have been carried out.
通过生产试验研究了电弧炉冶炼过程、L F精炼过程及连铸过程钢液氮的控制。
The paper introduces steelmaking process of develop on the MPH 200 passenger transport expert line railway steel and UIC54 export railway steel by continuous casting.
介绍了采用连铸工艺开发时速200公里客运专线用钢轨钢和出口uic 54钢轨钢的炼钢工艺。
Experimental result by low-melting point alloy on the electromagnetic damming for the melt puddle of twin roll steel strip continuous casting is reported.
报道双辊薄带钢铸轧熔池电磁侧封低熔点合金模拟试验研究结果。
Pressure and flow measurement is studied with the requirement of the field pressure and flow measurement in the continuous casting mould in Meishan Iron and Steel Corporation Ltd.
从梅山钢铁公司连铸结晶器现场的压力和流量检测的需求出发，对压力和流量检测问题进行了研究。
This article presents the application of LB - 352 level detector in measuring and automatic controlling steel level in mold in continuous casting machine.
本文介绍了LB-352液位计在连铸结晶器钢水液位测量与自动控制中的应用。
This article presents the application of LB - 352 level detector in measuring and automatic controlling steel level in mold in continuous casting machine.
本文介绍了LB-352液位计在连铸结晶器钢水液位测量与自动控制中的应用。
应用推荐