And analyze the contact strength of the roller and sprocket wheel while in meshing process.
分析链条和链轮啮合时，链轮和滚子的接触强度。
Thisestablishes the basis of contact strength and reliability studies of internal spur gears.
从而为内啮合直齿轮的接触强度及其可靠性分析奠定基础。
Additionally, it has advantages of higher contact strength, wearproof and efficiency in transmission.
同时具有接触强度高，耐磨损，传动效率高等优点。
The problem to improve the lubricating performance and to increase the contact strength are important objects in the studys of worm gearing.
改善润滑性能和提高接触强度是蜗杆传动研究的一个重要目的。
Not only the contact strength between the CAM and the rollers is discussed, the flexural strength and rigidity of the rollers are also discussed.
在机构强度分析中，阐述了凸轮-针轮副啮合齿面接触强度、针齿销的弯曲强度计算和刚度计算。
The paper deals with the contact strength problem of tractive mechanism of shearer by the finite element parametric quadratic programming method.
本文应用有限元参数二次规划法求解采煤机牵引行走机构齿轨接触强度问题，介绍了有限元建模和网格划分，分析了计算结果。
It is shown that this gear is of both high bending strength and high contact strength by analysing and studying its induced curvature and cutting methods.
通过推导这种新型齿轮齿面诱导法曲率，分析了接触强度得以提高的原因。同时用切齿法进行研究后得出，该齿轮还具有较高弯曲强度。
Contact strength, also referred to as finger strength, is simply the ability to hold onto the holds (as opposed to the ability to move between the holds).
接触力量也指手指力量，是指抓住手点的绝对能力(与之相对的是在手点和手点间移动的能力)。
Based on it, the formulae of contact strength of mesh points between the movable teeth and the surge wheel, the movable teeth and the internal gear are derived.
在此基础上导出了活齿与激波器、活齿与内齿轮啮合处的接触强度的公式；
The invention effectively puts an end to the phenomena of poor contact of connection caused by the discordance of contact strength of traditional manual connection.
有效杜绝由于传统人工手动接 线的接触强度不一致所造成的接线接触不良现象。
Prof. Zhang holds that double involute gear with ladder-shaped teeth possesses the advantages of good technology, high bending strength, high contact strength and fewer teeth.
张光辉教授认为：分阶式双渐开线齿轮具有良好的工艺性能、弯曲强度和接触强度高、最少齿数小等优点。
As each was graded on their overall performance, five 'handshake raters' also marked them on their grip, strength, duration, vigour and eye contact.
研究人员不仅对每个大学生的整体表现打分，还有五个“握手评分者”对他们的握法、力量、持续时间、活力和眼神交流进行打分。
In the ordinary work contact, can feel Yuan Yujun is a diamond, hard work for him, is perhaps the best way to prove his strength.
在平常工作接触中，能感到袁玉军是一个内秀的人，实干对他来说，或许是证明自己实力的最好表达方式。
Some characteristics of the rolls, such as strength vs. Thermal shock, tensile strength and contact fatigue strength, influence spalling. Thus, strength was investigated as a hardness parameter.
辊子的一些特性，例如：强度、耐热性、抗拉强度、接触疲劳强度都和剥落有关。因此，强度可作为硬度的参数来研究。
This paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact Ferrographical analysis is made.
本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。
Surface defects in ceramic bearing balls may significantly affect ball strength and reduce rolling contact fatigue lifetime.
陶瓷轴承球的表面缺陷会严重降低球的强度和滚动接触疲劳寿命。
It is well known that surface quality of parts has great influence on the operational performance such as wearing quality, figure strength and contact stiffness.
零件表面质量对零件的耐磨性、抗疲劳强度、接触刚度等使用性能和寿命有很大的影响。
The dynamic strength of rod string and the mount position of centralizer were calculated, according to the acquired deformation of rod string and its impact contact force with tube in the time domain.
根据求得的时域内抽油杆柱受力变形值以及与油管柱碰撞接触力，计算了抽油杆柱动强度和扶正器安放位置。
High service temperature and high strength good volume stability low THML. Cond. And can contact flame directly.
使用温度高，强度高，烧后线变化小，导热率低，可直接接触高温火焰。
Designs o? The closed soft surface gear transmissions are generally restricted by the contact fatigue strength.
闭式软齿面齿轮传动设计中，常受齿面接触疲劳强度的限制。
Surface quality of parts has great influence on the operational performance such as wearing quality, figure strength, corrosion resistance and contact stiffness.
零件表面质量对零件的耐磨性、抗疲劳强度、抗腐蚀性及接触刚度等使用性能以及寿命、可靠性都有很大的影响。
Because of the tooth thickness of the dedendum is larger than that of the common involute gear and the Pitchs do not contact each other, the beam strength and surface strength of tooth are increased.
由于该齿轮的齿根厚度比普通渐开线齿轮的齿根厚，并且节点附近不相接触，因此，其轮齿弯曲强度和接触强度都提高。
Furthermore, the contact finite element was adopted to gain the accurate distribution of strength in the subassembly with the interference between the axle hole and the shaft.
另外，还采用接触单元对孔轴过盈配合联接组件进行了有限元分析，得到更为精确的强度分布。
The anchor rod is anchored directly on the agitation pile wall of "thin type" with relatively low strength and channel bar is used under the anchor to contact with the agitation pile.
将土层锚杆直接锚定在强度相对较低的“薄型”搅拌极墙上，锚下用槽钢作为受压铁件与搅拌极相接触。
Shear strength of most contact surface specimens decreases with large water content of soil.
各接触类型接触界面的抗剪强度随土体含水率的增大均呈下降趋势。
Also, the calculation formula of the contact stress, the fatigue strength and the static strength for the small thrust bearing which are attached at the end face of roller are derived.
同时又对滚子端面的小型推力球轴承推导出接触应力、疲劳强度和静载强度的计算公式。
Heat treatment can increase the tensile strength and the hardness of the rail steel, and the contact fatigue strength is also increased.
通过热处理可提高轨钢的强度及硬度，接触疲劳强度也随之提高。
Contact FEM strength reduction method is an inverse process in limiting equilibrium analysis of slope stability.
有限元强度折减法可以作为极限平衡分析方法的一种逆过程。
Contact FEM strength reduction method is an inverse process in limiting equilibrium analysis of slope stability.
有限元强度折减法可以作为极限平衡分析方法的一种逆过程。
应用推荐