This article introduces a method of direct usage of voltage source as a power for Hall element instead of constant current system.
本文介绍一种不用恒流源而直接用电压源为霍尔元件供电的方法。
The current system requires constant sustainment intervention to maintain operations and does not address the growing population of small and micro satellites in orbit.
目前系统需要不断操作干预以保持运作，并且没有解决日益增长的轨道上小型和微型卫星的数量。
The control system adopts current PWM control mode, and high quality energy feedback with constant power could be accomplished.
控制系统采用的是电流型PWM控制方式，能够实现高品质的恒功率能量回馈。
The polarization curves of copper physical development (CuPD) system were obtained by transient constant current step method on copper plated platinum electrode.
本文采用镀铜铂电极和暂态恒电流阶跃的方法测得了铜物显（铜物理显影）体系的极化曲线。
The spot welding tests prove the microcomputer control system has satisfactory constant current monitoring effect under different main voltage and load conditions.
并通过不同网压和不同负载下的点焊试验，证明该微机系统可获得满意的恒流监控效果。
This topic carries on the constant current control to the resistance spot welding process using a system of single chip computer, whose core has used the C8051F005.
本文的研究工作利用单片机控制系统对电阻点焊过程进行恒流控制，其核心采用了集成度英明、助能强的C8051F005单片机。
Methods the system utilized low power MCU MSP430F1611 and the technology as generation of bi-phase constant current stimulation.
方法：采用低功耗单片机MSP430F 1611和压控双相恒流刺激产生技术设计系统。
Design and realization methods of integrated operational amplifier feedback constant current power in semiconductor laser reliability evaluation system are introduced in this paper.
介绍一种已成功应用于半导体激光器可靠性评估系统的负载浮置的集成运放反馈型恒流源的设计与实现方法。
This paper introduces a control system of spot welding constant current based on fuzzy logic arithmetic.
介绍了一种基于模糊逻辑算法的点焊恒电流控制系统。
The stable and constant control system of semiconductor laser diode includes constant current control, constant power control and constant temperature control.
半导体激光器稳恒控制系统包括恒电流控制、恒功率控制和恒温度控制三个方面。
This paper proposes an energy saving control mode for current source inverter(CSI) induction motor drive system with the motor driving a constant power load.
本文提出了电流型逆变器-感应电动机变频调速系统中电机驱动恒功率负载时，系统以最大效率运行的节能控制方式。
The control system hardware is studied, including the TMS320C31-based digital signal processor board, constant current source, displacement data collected channel.
对控制系统的硬件进行了研究，包括TMS320C 31控制板，数控恒流源和位移数据采集通道。
In this paper, a method is introduced to set up an automatic measurement system which is made of constant current source unit, voltage meter, switch matrix and computer with IEEE - 488 interface.
文中给出了一种由配有IEEE- 488接口的恒流源、电压表、开关矩阵和计算机组建自动测量系统的方法。
This paper deals with the development of the microcomputer constant current control system of the spot welding inverter.
本文研制逆变点焊电源的微机恒流控制系统。
Adopting constant current charging of computer measurement and control integrated system, high degree of automation, strong anti-interference ability.
采用恒流充电计算机测量控制一体化系统，自动化程度高，抗干扰能力强。
The control of the constant Phase difference between the current and the displacement of the magnetic damper in rotor-bearing system is studied.
对挠性转子轴承系统电磁阻尼器的电流位差常相位移振动控制进行研究。
This paper studied the design and implementation of large pulse constant current source system required by engine ignition.
本文研究了发动机点火工作中需要的大电流脉冲恒流源系统的设计与实现。
The design and implementation of large pulse constant current source system required by engine ignition are studied.
研究了发动机点火工作中需要的大电流脉冲恒流源系统的设计与实现。
A power supply of continuous solid laser krypton lamp using a new touching off system and transistor constant current circuit is proposed.
介绍一种晶体管恒流全新触发连续固体激光器氪灯电源。
Methods a dis continuous buffer system was used. CK MM isoform was separated by electrophoresis under the condition of constant current and low voltage, then fluorescence scanning.
方法采用不连续缓冲体系，在稳流低压条件下电泳分离CKMM亚型，荧光扫描。
Safety protection power circuit: Constant current control circuit, high standard standard protection system: preventing high voltage, temperature, surge, lightning and so on.
安全防护电源电路：恒流驱动电路，高标准防护系统：对过压、过热、浪涌、防雷具有良好的保护作用。
The capacitor current exchange type quasi-constant current charging system was used for capacitor bank storage energy systems.
所用电容器组储能系统采用电容换流式准恒流充电回路。
This paper introduces the constant-current system modification for energy conservation in Ningxia Qingtongxia Aluminum Group.
本文介绍了宁夏青铜峡铝业集团公司，不断改造电解直流稳流系统，达到节能增效的目的。
The system includes constant potential circuits, micro-current detection circuit, controller and its peripheral circuits as well as the communications with the PC.
该系统包括恒电位电路、微电流检测电路、控制器及其外围电路以及与上位机的通信。
A method is proposed to enhance the stability of a system with a direct current (DC) generator driving constant power load (CPL) based on damping compensation.
提出了一种提高基于阻尼补偿的直流(DC)发电机带恒功率负载(CPL)系统稳定性的方法。
The signal pre-processing system also has circuit to extract temperature signal via platinum thermistance, in which three-wire system and constant current measurement method are adopted.
信号预处理系统还包括温度信号提取电路，通过铂热敏电阻实现对温度信号的提取，采用了三线制恒流源测量法。
The control way of system has 3-patterns: exciting regulator of constant terminal voltage, constant exciting current regulator and exciting regulator of constant power factor.
控制方式具有恒机端电压励磁调节、恒励磁电流调节、恒功率因数励磁三种。
The control system of street light unit USES the constant current to supply, has the function of establish and timing adjustment output.
路灯单元控制系统采用恒流源供电，具有输出功率调整功能，并能定时调整功率。
The control system of street light unit USES the constant current to supply, has the function of establish and timing adjustment output.
路灯单元控制系统采用恒流源供电，具有输出功率调整功能，并能定时调整功率。
应用推荐