There are several levels of lava platform in the park, the main ring lava ring platform, ring volcanic cone lava platform and the overflow of lava platform, large area, gentle slope.
公园内有数级熔岩台地，主要有环火山口熔岩台地、环火山锥熔岩台地和裂隙溢出的熔岩台地，面积大、坡度平缓。
With analysis of structure of cone roller bearing inner ring forgings, corresponding improvement on original forging technology has been put forward.
分析圆锥滚子轴承内圈锻件结构，对原锻造工艺中的不足提出了相应的工艺改进措施。
The purpose of this paper is to analyses the structure, working principle and common troubles of twin cone lock ring synchronizer and to study the control methods and trouble shooting ways.
对汽车锁环式双锥面同步器的结构、工作原理、常见故障类型进行分析研究，找出发生故障的原因，然后提出解决和控制的方法。
The point of the most normal pressure was analyzed in the contact points between the adjustable ring and the planet cone.
分析出了调速环和行星锥的接触点为行星锥上正压力最大的点。
Tapered roller bearings are generally separable, i. E. The cone, consisting of the inner ring with roller and cage assembly, can be mounted separately from the cup (outer ring).
圆锥滚子轴承通常是分离型的，即由带滚子与保持架组件的内*$$}圈组成的圆锥内*$$}圈组件可以与圆锥外圈（外圈）分开安装。
With cars, milling, boring, drilling four automation function, can be turning sphere, cylinder, cone, thread, tapping, end face, inner and outer ring groove, etc.
具有车、铣、镗、钻四大自动化功能，可车削球面、柱面、锥面、螺纹、攻丝、端面、内外环槽等。
The connecting method is that a tooth outline cone type clamping ring is arranged between connected pipes and an outer casing.
这种连接方法是被连接的管子与外套之间装有齿形锥式卡环。
The results show that with the increase of the cone angles and the coefficients of friction in the certain range, the stress of the anchor ring can gradually decrease.
结果表明：随着锥角和摩擦系数在一定范围内增大，锚环的应力会逐渐减小；
Given this, it is necessary to detect the roadbed compactness with Rayleigh wave method and compare it with the sand cone method and cutting ring method, which verify its feasibility and reliability.
鉴于瑞雷波勘测技术在工程领域中的应用范围逐渐扩大，并取得了较好的效果，故有必要以瑞雷面波法对路基压实度进行检测，并与常规方法灌沙法和环刀法进行对比，验证其可行性与可靠性。
Bearing inner ring (shaft circle) of the basic cylindrical hole or holes in the internal tapered cylinder or cone in the axis line access.
轴承内圈(轴圈)的基本圆柱孔或圆锥孔的内接圆柱体或内接圆锥体的轴心线。
We can also carry out the analysis and calculation on the O-ring seal, which is used in the cone bit as well.
另外，对于应用于牙轮钻的O型密封圈进行了分析和计算。
The paper analyses the effect of translation and offset angle of the cone axis to shaft one on the gap variation between two ring-button, which position on two cones.
分析了牙轮钻头安装和磨损间隙引起牙轮相对牙爪轴线的平移和倾斜对相邻锥体上球齿间隙的影响，通过计算，当牙轮、牙爪轴线轴向、径向平移使球齿的趋近量有抵消的趋势；
Short and strong mouth, slightly bent downward, cone, Primary and outer ring, with two pale horizontal spot.
嘴短而强健，呈圆锥形，稍向下弯；初级飞羽9 枚，外缘具两道淡色横斑。
Lasing Eye, Foundation, Sockets, Plate, Guide Cone, Lashing Bar, Twistlock, BaseTwistlock, Single Stacker, Double Stacker, Bridge Fitting, D Ring.
眼板，底座，底板，吊座，导锥，拉杆，底锁，扭锁，单锥，双锥，桥码，地令。
The experiment research on stability of ring-stiffened concave cone-toroid-cylinder combined shell is presented in this paper.
文章对凹型加肋锥-环-柱结合壳稳定性进行了模型试验研究，观察到凹环壳段失稳的一个特殊现象。
The experiment research on stability of ring-stiffened concave cone-toroid-cylinder combined shell is presented.
本文对凹型加肋锥-环-柱结合壳稳定性进行了模型试验研究，观察到凹环壳段失稳的一个特殊现象。
The experiment research on stability of ring-stiffened concave cone-toroid-cylinder combined shell is presented.
本文对凹型加肋锥-环-柱结合壳稳定性进行了模型试验研究，观察到凹环壳段失稳的一个特殊现象。
应用推荐