In this paper, the application of the sand cone model in supply chains was discussed and new research avenues were opened in the research of the compositeness of supply chain.
通过将沙堆模型应用于供应链，为供应链竞争力问题提出新的分析思路。
In this paper, the application of the sand cone model in supply chains is discussed and new analysis thoughts are provided in the research of the compositeness of supply chain.
通过将沙堆模型应用于供应链，为供应链竞争力问题提出新的分析思路。
A blade wall thickness inspection method based on blade cone beam volume ct image sequence and blade CAD model are given.
本文给出一种基于叶片锥束体积CT图像序列和叶片CAD模型的叶片壁厚检测方法。
After the Kongdong reservoir water hole plate gate rebuild into a cone valve, the stilling basin, model test was conducted.
对崆峒水库输水洞平板闸门改建为锥形阀后的消力池进行了模型试验研究。
This paper presents a geometric model description methods of the cone gear for final driver of automobile driving axle system based on STEP, and establishes application protocol (ZCAP).
提出一种基于STEP标准的汽车后桥主传动器中圆锥齿轮类零件的几何模型描述，并制定出它的应用协议(ZCAP)。
It proposed genetic algorithms with canonicity real number encoding, established the math model of cone error and calculated it with genetic algorithms of canonicity real number encoding.
提出了归一化实数值编码的遗传算法，建立了圆锥度误差的数学模型，并运用归一化实数值编码的遗传算法进行求解。
By using it, the model of equal lead on the cutter can be applied to the cylinder, cone and sphere.
通过该模型，分别建立了柱面上、球面上和锥面上球头立铣刀的等导程螺旋线的数学模型。
Blockage tests may make use of any shape model that is likely to be tested in the tunnel, though the more useful shapes are cone cylinders and hemishere cylinders.
尽管进行堵塞试验用的模型较为通用的外形是锥柱体的半球柱体，但任何能在风洞内进行试验的形状都可以用。
The model can reflect the dynamic characteristics of the water stage at the cone center, and it does not require artesian aquifers in balance regions to be of homogeneous media.
该模型能反映漏斗中心水位的动态特性，且不要求均衡区承压含水层为各项同性的均匀透水介质；
Based on static mechanism and kinetic equation of underground fluid, the model for calculating the height of the water cone with curvilinear side surface is established.
基于静力学原理和地下流体的运动规律方程，建立了底水油藏水锥体侧斜面为曲线情况下的水锥高度模型。
The coupling between butt fiber and cone lensed fiber is described in this paper. A theoretical model is presented and the formula of coupling efficiency is given.
建立了平端光纤与锥端微透镜光纤对耦合的理论模型，得到耦合系数的计算公式。
You can think of the overall shape of the HSV model as being an upside-down cone, even though in reality the shape of the cone is somewhat distorted.
您能想到的是HSV模型的整体形状，作为一个倒锥形，在现实中的圆锥形状，即使是有些扭曲。
The extraction mechanism of uranyl nitrate is discussed in terms of a cone-angle model.
依据锥角堆积模型讨论了协萃反应机理。
A hydrological model of the cone karst is established on the basis of karst morphometry in the Anshun area, Guizhou.
通过对贵州安顺地区喀斯特的实际研究，从地貌形态结构入手，建立了锥状喀斯特的水文结构。
Regarding ball - cone-column model, then the forehead cone partial heat flux distribution is calculated emphatically.
对于球锥柱模型，则着重计算头部锥体部分的热流加热率。
According to the vision character of cone and rod in human's retina, a new model called vision adaptability model is proposed in this paper, the model aims at enhancing color image.
根据人眼视网膜上的锥细胞和柱细胞的视觉特性，提出了用于彩色图像增强的视觉适应性模型。
A improved cone-shaped model is given in order to improve the old cone-shaped model.
提出了一种融入方向关系矩阵模型思想的改进型锥形模型。
Based on the study of melting behavior of thermoplastic polymers tested in the cone calorimeter, a differential numerical model for one-dimensional unsteady burning of polymers was put forward.
针对热塑性聚合物在锥形量热仪中燃烧测试时的熔融行为，提出了有限厚度的聚合物固体一维不稳态燃烧微分模型。
By analyzing the scan characteristics, a target dynamic model and an observation model are established respectively for the typical cone scan type and shave scan type.
针对典型的锥扫模式和推扫模式，根据其扫描特性建立目标的运动模型和测量模型。
Besides, it designs DEA model with SEM constraint cone, with which the assessment of the competitive efficiency in the regional construction industry is successfully completed.
设计出了带有SEM约束锥的DEA模型，运用此模型完成区域建筑产业竞争效率评价，并且取得了较好的效果。
This paper presents a no-contact temperature measurement for a small rocket engine jet exhaust, for a shock wave on nose cone of a model in a jet exhaust and for a model surface of various materials.
本文叙述了用光学法测量小发动机燃气流火焰温度、燃气流中模型前端的激波温度及不同材料的模型表面温度。
Constitution and working principle of Model WGSH80 Roll Forging Press with Double Cone Roller have been described.
主要阐述了WGSH80型双锥辊辗压机液压系统的组成及其工作原理。
The deforming force of cone-die direct extrusion is solved by a mathematic method based on the simplified flow model of slip line field.
基于滑移线场的简化流动模型，运用数学方法求解出了一种锥形模正挤压变形力的最佳上限解，并将该上限解用通用解析式表达出来。
The utility model relates to a single crystal fused aluminum oxide ingot mould. The utility model is characterized in that the cavity of the aluminum oxide ingot mould is in a cone shape.
本实用新型涉及一种单晶电熔氧化铝锭模，其特征在于：氧化铝锭模型腔呈圆锥台状。
Compared with the experimental data, the simulating results show that the proposed model is reliable and can be applied to the numerical simulation of turbulence flow around the fixed-cone valve.
数值模拟结果与试验资料的比较分析表明两者吻合较好，从而验证了该模型在锥阀湍流模拟中的可靠性。
The experimental result is satisfied with the experiential model which is correlated with the change in Lithium-Calcium base grease cone penetration with…
添加不同质量分数的ZDDP的锂-钙基润滑脂经加水滚筒工作后，其锥入度变化的经验模型与实验结果吻合。
According to Darcy-theory and Dupuit-hypothesis, the roots of tree were approximately considered as an upside-down circular cone, and then plant root water uptake model was established.
该文根据达西定律和裘布衣假定，把树木根系近似看作为倒圆锥体，建立了树木根系吸水模型，并以油松为例对模型进行了验证。
According to Darcy-theory and Dupuit-hypothesis, the roots of tree were approximately considered as an upside-down circular cone, and then plant root water uptake model was established.
该文根据达西定律和裘布衣假定，把树木根系近似看作为倒圆锥体，建立了树木根系吸水模型，并以油松为例对模型进行了验证。
应用推荐