Design Theory of Reinforced Concrete and Composite Structures.
钢筋混凝土及组合结构设计理论。
To support this UML 2 introduced a new concept called composite structures.
为了做到这一点，UML2引入了一个称为组合结构的新概念。
Their strength is often improved using reinforced composite structures.
它们的强度通常可采用加强复合结构来改善。
Engineers can also use acoustic emission sensors on composite structures.
工程师还可使用会发出声波的探测器，来检查复合材料的结构。
Aim To analyse the dynamic characteristic of the interface of composite structures.
目的分析组合结构结合部的动态特性。
Composite structures include layers, fibers, particles, and any combination of the three.
物的结构包括分层，纤维，粒子以及三种之间的任意组合。
Resin film infusion (RFI) is a new technique for the manufacture of composite structures.
树脂膜熔渗工艺(RFI)是一种新型的复合材料成型工艺。
A finite element model for rubber matrix composite structures is developed in this paper.
建立了一个橡胶复合材料结构有限元分析模型。
This paper introduces the methodology of design for manufacturing for composite structures.
本文介绍了基于制造工艺可制备性的复合材料产品设计方法。
The results can provide references for forecasting acoustic fatigue life of composite structures.
所得结果可以为预测复合材料结构的声疲劳寿命提供参考。
Some developments have been made on composite structures of steel and gangue concrete since 1998.
自1998年以来，关于钢与煤矸石混凝土组合结构的研究取得了一定进展。
The steel-concrete composite structures are used widely in building structures throughout the world.
钢-混凝土组合结构在全世界广泛地用于建筑结构。
Experimental results indicate that the strain in composite structures can be suppressed effectively.
实验结果表明构件的应变幅值得到了有效的抑制。
In this paper a simplified method for analyzing space truss and plate composite structures is studied.
本文研究并提出了网架-平板组合结构的简化分析方法。
Based on both macro - and micro - stress fields, composite structures 'damage and failure are analyzed in this paper.
本文采用基于宏观和细观应力场两种不同方法来进行复合材料结构的损伤和破坏分析。
Brittle softening is one of the important factors which affects the deformation stability of the composite structures.
复合材料的脆性软化是影响其结构变形稳定性的重要因素之一。
All of equations derived in this paper are very important for engineers doing fracture analysis of composite structures.
这些公式对航天复合材料板受弯断裂分析时非常重要。
The hybrid multilayer composite structures consist of layers with different thermal conductivity and constitutive constants.
复合多层混合结构由不同热导率材料混杂组成。
A analysis method of fatigue life reliability for composite structures is developed based on residual strength degradation theory.
以剩余强度衰减理论为基础，建立了一种复合材料结构疲劳寿命可靠性定量分析的工程方法。
So thorough comprehension of the hybrid structure performance is beneficial to new type composite structures and new design concept.
因此，深入理解符合结构的这些特性，有利于开发新的组合结构形式并建立新的设计概念。
An impact damage tolerance reliability analysis method was discussed for composite structures by introducing an impact threat concept.
论述了基于冲击威胁概念的复合材料结构冲击损伤容限可靠性分析方法。
Repair of aircraft Composite Structures is a new basic course of aircraft manufacturing engineering, aircraft maintenance directioned.
《飞机复合材料结构修理》是飞行器制造工程(飞机维修方向)专业的一门专业技术课程。
The paper applies the mixed analysis to calculate the geometric nonlinear stability of space composite structures at construction stage.
本文采用混合分析法进行空间组合结构施工阶段的几何非线性稳定计算。
The paper probes into the analysis method of composite structures when local failures of which are considered. This is a nonlinear problem.
本文考虑复合材料结构发生局部破坏时的分析问题，这是一个非线性问题。
The crashworthiness of composite structures has become a hot research topic in recent years because of its importance and complicated nature.
近年来，由于复合材料结构耐撞性的重要性和复杂性，所以，复合材料结构耐撞性是工程力学领域的一个研究的热点。
The progressive damage method has been widely applied to analyze damage accumulation and predict strengths of all kinds of composite structures.
累积损伤方法已被广泛应用于复合材料的各种结构损伤分析及强度预测中。
The finite element analysis methods for plate-beam composite structures with random physical parameters under the random loads action are studied.
以随机物理参数板梁组合结构为对象，研究了其在随机力作用下的有限元分析方法。
The optimal design of composite structures of principle bearing cylinder in large scale communication satellites is performed with JIFEX software.
应用JIFEX软件对大型通信卫星主承力结构——中心承力筒的复合材料结构进行优化设计。
Debonding between steel and concrete is a common failure mode in composite structures, and it is indicated interfacial failure may be energy governed.
界面脱粘是钢-混凝土组合结构中的一种常见破坏方式，而一些研究结果表明钢-混凝土界面的脱粘可能是由能量控制的。
Debonding between steel and concrete is a common failure mode in composite structures, and it is indicated interfacial failure may be energy governed.
界面脱粘是钢-混凝土组合结构中的一种常见破坏方式，而一些研究结果表明钢-混凝土界面的脱粘可能是由能量控制的。
应用推荐