Understand that fear is a component of stress, the complex fight-or-flight response ingrained in us since the cave days.
要明白恐惧是压力的一个组成部分，它是一种与穴居时代俱来的“要么对抗，要么逃跑”的复杂反应。
The dysregulation of fear is an important component of many disorders, including generalized anxiety disorder, panic disorder, specific phobias and post-traumatic stress disorder.
恐惧失调是很多疾病的一个重要组成部分，包括广泛焦虑症，恐慌症，特定恐惧症和创伤后恐惧障碍。
Qigong can help practitioners to learn diaphragmatic breathing, an important component of the relaxation response, which is important in combating stress.
气功可以帮助医生了解横膈呼吸，一个重要组成部分放松反应，这是很重要的，打击的压力。
A mechanical model is built firstly for single microcrack under uniaxial compression loading, and the stress component of microcrack end is calculated.
首先建立单一微裂纹在单轴压缩荷载作用下的力学模型，求出裂纹端部的应力分量。
This method can be applied to designing sample components for fatigue test as well as to forecasting various fatigue life of component from stress fatigue to strain fatigue.
该方法不仅可用于构件从应力疲劳到应变疲劳的各类疲劳寿命预测，还可用于构件的疲劳试验模拟件设计。
Tensile and fatigue tests showed that this detector can effectively detect Che stress concentration of ferromagnetic component.
拉伸和疲劳循环试验说明了所研制的仪器能有效地检测构件的应力集中。
The research shows that the stress concentration is large near the interface of each component in the area of node.
研究表明，节点区域内各构件的接触面附近，存在较大的应力集中现象。
The circuitry may be rearranged for the purpose of the test to reduce the likelihood of solid state component damage while retaining the representative dielectric stress on the circuit.
有获得的电介质应力集中在电路时，为了测试，可以将电路重新安排，以减少固态组件受损的可能性。
Resolve the problem of stress focus don't adopt increasing component dimension, but structure measure by reducing stress focus or locally supplying strength.
解决应力集中问题不应通过加大构件断面尺寸，而应采用降低应力集中的结构措施或局部补强。
It is hard for CFRC to directly sense the load of vehicles, and the special component which can enhance the stress by changing the pressed area.
考虑到碳纤维水泥试件很难直接感应到车辆的荷载，提出了改变受力面积来增大碳纤维水泥试件所受压力的特殊构件。
In the optimum design, effects of variety of structure type and structural components on stress are analysed, so that reasonable structure type and component dimensions may be obtained.
在优化设计中，用正交法分析了结构形式和构件变化对应力变化的影响，得出了合理的结构形式和构件尺寸。
During component design, eliminating or minimizing areas of stress concentrations is a key objective. Special attention is given to protective finish runouts adjacent to stress concentration details.
杜绝应力集中是部件设计的主要目标，应当特别注意过渡到应力集中的各个点附近的表面保护涂层。
Resloving the problem of stress focus don't adopt increasing component dimension, but structure measure by reducing stress focus or locally supplying strength.
解决应力集中问题不应加大构件断面尺寸，而应采用降低应力集中的结构措施或局部补强。
The limitation of the stress component method on solving such a problem is also discussed.
并讨论了应力分量法的局限性。
The measurement of working stress is to measure the actual stress in a working structure component.
工作应力测试就是检测结构构件在使用时的实际应力。
The low quality of pipe material (chemical component, microstructure) is the main reason to result in stress corrosion damage.
管路所用材料的材质状况(化学成分、显微组织等)不佳，是造成应力腐蚀破坏的主要因素。
The problems of whether the peak stress is the stress component distributing along thickness in nonlinear and whether the peak stress is self-limiting were analyzed and discussed.
对峰值应力是否仅是沿壁厚非线性分布的分量，是否都具有自限性进行分析、讨论。
Volume-stress: the stress exists in three directions in the volume of the component is called Volume-stress, which is also called three-faces stress.
体积应力：应力在构件结构中沿空间三个方向上发生，也称三向应力。
Shroud is an important component for non-oxidation casting of steel. Thermomechanical stress is a major cause that results in its damage.
长水口是实现钢水无氧化浇注的重要元件，在使用过程中常常因为热机械应力过大而损坏。
The stress, strain, and displacement of component of the cutters have been simulated under different rotate speeds in ANSYS.
采用ANSYS进行了不同转速下高速面铣刀刀体、刀片、刀具附件等刀具构件、装配的应力、应变、位移有限元分析。
The component randomness is considered. The SFEM is introduced in the iterative formulas of EFEM under cyclic loading to obtain the random response of local stress and strain.
考虑零构件的随机因素，将随机有限元方法引入到交变载荷下弹塑性有限元的迭代格式中，得到局部应力应变的随机响应，为低周疲劳可靠性分析提供了更精确的依据。
To increase component of grinding force ratio can increase principal stress extreme values in grinding stress field. Materials can be removed by brittle fracture.
粗加工中，增加磨削分力比可以增大磨削应力场中的主应力极值，有助于材料的脆性去除。
The combined stress time history of ship hull's longitudinal component is obtained from combining the overall longitudinal bending stress with local bending stress.
对该应力时历进行雨流计数，经统计分析获得应力范围的长期分布，进而算出船体总纵弯曲时纵向构件在多种应力成份组合下的疲劳损伤。
The stresses component, principal stresses and effective stress on the surfaces of thin plate or shell structures.
薄壁板壳结构表面的应力分量、主应力和有效应力。
A host of focal mechanism solutions show that there is a locally small regional stress field characterized by horizontal compresion component is dominant in the north of the basin.
大量震源机制解结果表明，运城盆地存在以水平拉张为主要特点的局部小区域应力场，盆地北部水平挤压分量占优势。
Observational objects include: cubic strain, component strain, component stress and differential strain of borehole stress strain.
观测对象包括：体应变，分量应变，分量应力和钻孔应力-应变差应变。
The device can guarantee the stress of anchor rope under designed stress all the time, and obtain the aim of protecting component in anchor-hold structure.
自保护装置能保证预应力锚拉构件上的应力始终不超过设计应力，达到保护锚拉构件不破坏的目的。
The device can guarantee the stress of anchor rope under designed stress all the time, and obtain the aim of protecting component in anchor-hold structure.
自保护装置能保证预应力锚拉构件上的应力始终不超过设计应力，达到保护锚拉构件不破坏的目的。
应用推荐