The compensation precision of SAPF relies heavily on the design of current loop controllers.
大容量并联型有源电力滤波器的补偿精度取决于电流环的设计。
The experimental results show that the active heave system put forward is feasible and has higher compensation precision.
试验结果表明，所提出的主动型升沉补偿系统是可行的，具有较高的补偿精度。
According to the optimization and simulation result, it shortens the distance from the knife-edge to the aspheric surface to be tested and obtains higher compensation precision.
从设计结果上看，它缩短了刀口到待检非球面的距离，获得高精度补偿。
The programs for monitoring and displaying are designed using WINCC. The methods for improving efficiency and precision by error compensation and perfect software design are adopted.
采用WINCC设计测长监控与显示程序，并利用误差补偿技术及完善的软件设计方法，保证了测长系统的高效准确。
The simulation results verify the high precision of the proposed compensation method regardless of the waveform of ct primary current, remanent flux level, and load characteristic.
仿真结果验证了所提补偿方法的高精度，而且不受CT负载特性、CT剩磁情况及原边电流直流成分的影响。
The experimental results show that the direct compensation can eliminate the limit cycle, and improve the precision of the system combine precision compensation.
实验结果证明，直接补偿算法能消除极限环，直接补偿算法配合精度补偿可以消除间隙非线性引起的极限环并提高系统精度。
The machining precision can be improved and the dimension scope of machining the polygon prism is enlarged by using the proposed compensation method.
采用这种误差补偿方法可以大大地提高车削多面体的精度，扩大车削多面体的尺寸范围。
Forecast compensation and control technology is an effective method to improve precision internal grinding quality.
预报补偿与控制技术是提高精密内圆磨削质量的有效途径。
The phase error estimation part utilize one pilot tone to track the phase error and uses the estimation after compensation structure to improve precision.
残留相偏估计部分采用利用导频进行相偏跟踪的方法，并采用补偿后估计的结构来增加估计的精度。
An adaptive compensation method was presented to improve the precision of the long weighbridge weight-in-motion system.
提出一种通过自适应补偿提高长秤台汽车动态称重系统精度的方法。
An error compensation strategy is adopted properly to improve the manufacture precision of CNC machine effectively.
为用适当的误差补偿策略做准备，可有效提高数控机床的加工精度。
This method of adopting the dispersion function series expansion can be used in high precision broadband dispersion compensation.
这种把色散系数函数化成多项式的分析方法，适合于任意精度的宽带色散补偿。
To improve measurement precision of gyroscope, a novel nonlinear error compensation model is proposed using an algebra algorithm of neural networks.
为了提高陀螺仪的测量精度，基于神经网络代数算法提出一种新的非线性误差补偿模型。
Error calibration and compensation is an important means for increasing the practical precision of inertial systems. But there existed a contradiction between perfection and rapidity to solve.
误差标定及补偿是提高惯性系统使用精度的重要手段，但标定的完善性与快速性之间存在矛盾。
CNC programming process, the proper use of cutlery radius compensation functions to simplify calculations, increase the efficiency of programming and processing precision.
数控编程过程中，刀具半径补偿功能的正确使用，可以简化计算、提高编程的效率和加工精度。
The interpolation precision was improved by introducing error compensation and solving the matrix equation after interpolated points' parameter had been computed roughly.
该算法是在粗确定插补点参数后，引入误差补偿值，通过求解矩阵方程提高插补点的计算精度。
Against at weak robust and low precision of standard PID, a nonlinear and high precision PID based on repeatable error compensation is put forward in this paper.
文章根据常规pid控制器鲁棒性差、控制精度不高的特点，提出一种基于重复误差补偿控制的非线性、高精度PID控制器。
In the spherical surface NC turning, the correct tool length compensation and tool nose radius compensation are significant to guarantee the precision of spherical surface.
在球面的数控车削加工过程中，刀具长度补偿和刀尖半径补偿的正确与否对于保证球面的轮廓精度极为重要。
Practice has proven tool radius compensation in the rough, finishing in the semi-fine and practical, and the size of precision machining parts, components can also be completed on the burr removal.
实践证明刀具半径补偿在粗、半精和精加工中切实可行，且符合零件加工尺寸精度要求，同时还可以完成零件上毛刺的清除。
Error compensation is an effective approach to enhance machining precision, and error modeling is the key factor for the compensation.
误差补偿是提高机械加工精度的有效途径，其中误差的建模是关键。
The result of proposed modeling method indicates that it can highly improve the robustness, versatility and precision of the thermal error compensation model.
研究结果表明使用本方法可大大提高热误差补偿模型的鲁棒性、通用性和精度。
Error calibration and compensation is an important means for increasing the practical precision of inertial systems.
误差标定及补偿是提高惯性系统实用精度的重要手段。
Systematic error compensation is one important approach to enhance the machining precision, and systematic error modeling is the key process for the compensation.
系统误差补偿是提高零件加工精度的重要途径，其中系统误差的建模是关键。
Periodical check on the compensation system can make up the degraded precision due to the machine's wearing, and prolong the work life of the line cutting machine tools.
对补偿系统的定期校验则可以弥补机床磨损造成的精度降低，使线切割机床的高精度工作寿命得到延长。
Through MSC-51 programming, arrives at the dynamic compensation of the parameter and high accuracy measures with the device of the low precision.
并详细介绍了基于MSC-51的软件编程，实现测试过程中对参数的动态补偿以及用低精度的器件实现高精度测量的方法。
The result indicates that the precision can be improved 1-2 precision grade by using the compensation control method.
试验结果表明，应用该补偿控制方法，可对滚珠丝杠的磨削精度提高1-2个精度等级。
A method based on recurrent neural network compensation Kalman's evaluation error is proposed in order to enhance the evaluation precision.
为了提高卡尔曼滤波估计精度，提出了一种基于回归神经网络补偿卡尔曼滤波器估计误差的方法。
As to motion compensation module, bi-directional compensation algorithm is used. The precision is half pixel.
对于运动补偿模块采用双向补偿的算法，补偿精度为半像素。
The "rough-and-fine movement compensation" de-chirping method presented in this paper not only has high precision, but also is easy to realize in engineering project.
文中提出的“粗精运动补偿”解线性调频方法不仅具有较高的估计精度，而且易于工程实现。
A model for compensation of radial shift was established to further improve fabrication precision during polar laser direct writing.
为了进一步提高光学元件的线条制作精度，建立了极坐标激光直写时线条中心径向漂移的补偿模型。
应用推荐