Network interface for inter-partition communication (optional).
用于分区之间通信的网络接口(可选)。
There's also an interface on each LPAR, on the 10.4.4 network that is used for internal (private) communication between the LPARs over the POWER Hypervisor virtual network.
在10.4.4网络上，每个LPAR上还有一个接口，这个网络用于LPAR之间通过POWER Hypervisor虚拟网络进行内部(私有)通信。
By building an interface to your application that allows users to connect to it with IM, you take advantage of a large existing infrastructure for communication over a network.
通过为应用程序构建一个界面，使用户能通过IM连接到应用程序，从而利用很多现有的网络通信基础设施。
To enable communication among the servers, each server includes one or more network interface CARDS (NICs) that attach to an external networking infrastructure.
为了实现服务器间的通信，每个服务器都包含一个或者多个网络接口卡(NICs)，它们连接到一个外部网络设施上。
The topology of control network, system management, communication between control equipment and CPU, human machine interface (HMI) were clarified.
阐述了控制网络的结构，系统的管理，所控制设备与控制器间的通讯及人机界面。
Serial data communication has gained wide application in network transmission, backplane transceiver and I/O interface.
串行数据通信在网络传输、背板连接和I/O接口等领域应用非常广泛。
Network interface unit (NIU) is an interface device between the control computer and the communication network.
网络接口单元（NIU）是控制计算机与通信网络进行交互的一种接口设备。
TCP/IP protocol based on network is adopted and interface between microcontroller and network hardware is designed in the hardware platform communication.
在此硬件平台通讯中，采用了基于网络的TCP／IP协议，设计了单片机与网络的硬件接口。
The topology of the network, the physical interface and the communication protocol are also described.
文中对控制网络的物理层接口、拓扑结构、通信协议等作了较为详细的说明。
An idea of dual network SCADA system is proposed and the function design, implementation method and programming interface of dual network communication software are introduced.
提出了采用双网络结构的思想，并详细介绍了双网络通信软件的功能设计、实现方法及编程接口。
Fault recovery method, communication network, network unit and communication interface module.
故障恢复方法，通信网络，网络单元，及通信接口模块。
The master communicates with the relay unit by serial communication interface and the relay unit communicates with module unit by wireless communication network.
上位机和中继单元之间采用串行口通信，中继单元和模块单元之间采用无线网路进行通信。
The AS-I interface network layer was used to carry out the interconnection communication between sensor and executor.
接口网络层用于传感器和执行器的联网通信。
It gives user complete overview of all inbound and outbound network communication in an intuitive user interface.
它给用户一个直观的用户界面，所有入站和出站网络通信的完整概述。
This system is composed of detector module, data acquisition module, ARM MPU module, network interface communication module and human machine interface module.
该系统硬件由探测器模块、数据采集模块、ARM微处理模块、网络接口模块和人机接口模块等几大模块组成。
The meter is designed with isolated RS485 series interface and standard communication protocal compatible with ADAM4000 and can be connected to control network directly.
测试仪设计有隔离的RS485标准串行口，通讯协议兼容研华ADAM4000系列，能够直接接入RS485总线网络。
Moreover, in order to control system operation and monitor real-time battery status effectively, it also develops a centralized computer control system interface based on CAN communication network.
此外，为了有效地控制系统运行及实时监测电池状态，还设计了以CAN通信网络为基础的集中式计算机监控系统界面。
As an interface the avionics full-duplex switched Ethernet (AFDX) end-system provide to application program, AFDX communication ports play an important role in AFDX network information transmission.
航空电子全双工交换以太网(AFDX)通信端口作为AFDX端系统提供给应用程序的接口，对于AFDX网络消息的传递有着重要的作用。
The network interface port, including both hardware and software, of FASNET and the communication experiment among three terminals (telephones and microcomputer…
并详细介绍了作者采用Fasnet规程所作的网络接口软、硬件以及在三个终端（电话、微机）之间的通信实验。
There is a higher rate of performance cost in an IBM PC leal area network which is realized by and IBM PC asynchronous communication interface in a multi-disciplinary scientific research vessel.
在综合的科学考察船上以异步通讯口实现的IBM- PC局部网具有较好的性能价格比。
Gateway a device that ACTS as an interface between two different communication protocols. The Network Gateway Module (NGM) provides a communication protocol that a PC can understand.
网关网关是两个不同的通讯协议之间的接口，网关模块(NGM)提供了个人电脑可理解的通讯协议。
The network interface port, including both hardware and software, of FASNET and the communication experiment among three terminals (telephones and microco…
并详细介绍了作者采用Fasnet规程所作的网络接口软、硬件以及在三个终端（电话、微机）之间的通信实验。
The system can insure the conversion between the Serial Communication and network interface, and finite samples multi-channel parallel collection, and real-time display and data conservation function.
该系统实现串口通信与网络接口的转化，有限点多通道并行采集，实时显示及数据保存功能。
The network interface port, including both hardware and software, of FASNET and the communication experiment among three terminals (telephones and microcomputers) usi…
并详细介绍了作者采用Fasnet规程所作的网络接口软、硬件以及在三个终端（电话、微机）之间的通信实验。
As a network bridge, communication controller is the interface device which realize the function of communication between supervise PC and field bus.
总线控制器作为管理计算机与现场总线的接口装置，起到了管理计算机与智能仪表数据双向传输的网桥作用。
This paper introduces how to debug embedded software by Ethernet interface in the embedded debugger. The network communication between the host computer and the board has been implemented.
本文介绍了在嵌入式调试器中如何通过以太网口进行嵌入式软件调试，实现了主机与开发板之间的网口通信。
Serial interface supports three communication criterions and can easily embeds itself to network nodes being composed of RS-485, RS-232 and circuit.
串行口支持3种通讯规范，可以很方便地嵌入到使用RS-485通讯接口、RS-232通讯接口和电流环通讯接口的网络节点中；
In network communication subsystem, the module of UART to network interface was responsible for accessing Ethernet. Through accessing Ethernet, every LCD spliter could be real-time monitored.
在网络通信部分，通过串口转网口模块实现将每个车载分屏器接入以太网，通过以太网可对每个车载分屏器实时监控。
Constituent parts of ANDON system, display scheduling software, communication protocol, the construction of embed Ethernet network interface are illuminated.
围绕ANDON系统的显示调度软件、显示数据网络传输协议、嵌入式以太网络构建等几个组成部分展开论述。
This paper discusses the EPON Network Element Management System Communication Interface Design and Implementation.
本文主要探讨的是EPON网元管理系统中的通信接口设计与实现。
应用推荐