He was posted to Hong Kong as second-in-command of C Squadron.
他被派到香港任C中队的副队长。
I found that if two elements undergo the same type of movement the launching site of one element must c-command the launching site of the other element.
我发现，如果两个成分要作同类型的位移，其中一个的起点必须成分统治另一个的起点。
The next step would be to attempt reinitialize the drive using SYS command that hopefully is on your boot diskette by entering SYS C: from your A: drive.
接着就要试着用SYS命令来重新对驱动器进行初始化，但愿该命令是在你的启动盘里，在A：驱动器下键入SYSC：。
You can do this by initiating a CLI session and passing the appropriate command with the -c argument.
实现方法就是发起一个CLI会话并使用- c参数传递相应的命令。
Try running the command on a C source file -- it should output the entire main() { } block, including the initial "main()" and the closing '}'.
试着对C源文件运行该命令 --它应该输出整个main() { }块，包括开始的 "main()"和结束的'}'。
This command runs the site from c: \ myapp folder over port 80.
该命令会运行c： \myapp目录中的站点，端口号是80。
You can check your server configuration Settings with this command: onstat -c.
您可以使用下面的命令检查服务器配置：onstat- c。
The gprof command produces an execution profile of your compiled programs, either in c, Pascal, FORTRAN, or even COBOL.
gprof命令为您所编译的程序(可能是用c、Pascal、FORTRAN、或者甚至是COBOL编写的程序)产生一个执行概要。
The admin commands or task command can be invoked in batch or interactive mode, in a script, or from an operations command prompt using the wsadmin -c command.
可以在脚本中以批处理模式或交互模式调用管理命令或任务命令，或使用wsadmin- c命令从操作命令提示符调用。
Next, open a new command window and change the directory to c: \ MQJMS \ batch and run the classpath.cmd variable to initialize the classpath variable.
接着，打开一个新的命令窗口并转到c： \mqjms \batch目录，运行classpath . cmd变量来初始化classpath变量。
Start a command prompt window, change to the directory where your test files are located (c:\og61\dwsample) and run your setup.bat command to set the environment variables
请启动命令提示窗口，更改到测试文件所在的目录 (c:\og61\dwsample)，然后运行您的setup.bat 命令以设置这些环境变量
Finally, unless the -c (accept_all) option is given from the command line, autotag.pl will ask if it's okay to rename the file.
最后，除非通过命令行给出- c (accept_all)选项，否则autotag . pl将询问是否可以对文件重命名。
A new rset is created by the mkrset c command.
使用 mkrsetc命令创建新的资源集。
Because we have informed audit to print the trail part of the record, we can now see that the command options parsed to pwdadm was the 'alpha -c'.
因为我们让审计系统输出记录的剩余部分，现在可以看到传递给pwdadm的命令选项是'alpha- c '。
The lsdev -c command will show all the devices that are on the old server; you can then run the lsattr and LSCFG commands against that output to get all the customized Settings and attributes.
lsdev—c命令将展示旧服务器上的所有设备；随后可以针对输出运行lsattr和lscfg命令来获得所有定制的设置和属性。
Open up the Windows command prompt, change the directory to c: \ WSDK \ bin.
打开窗口命令提示符，转到C： \wsdk \bin目录。
When you get to section 2, you may have a problem with the second command: su -c 'yumdownloader — source kernel'.
执行到第2部分时，可能会在执行第二条命令su - c'yumdownloader——source kernel '时遇到问题。
Create a folder called DotNETClient and open a command prompt at "c: \ DotNETClient".
创建一个名为DotNETClient的文件夹，并在“c： \ DotNETClient”位置打开一个命令提示符。
Change the directory to c: \ WSDK \ bin and execute the following command to deploy the Price web service.
转到c： \wsdk \bin目录并执行下面的命令以部署PriceWeb服务。
Deploy the code using the ant deploy command under the c: \ orderapp folder.
在c： \orderapp文件夹下使用antdeploy命令来部署代码。
When the command is ready to be executed, AIX will fork the process as sh -c exec .
当命令准备执行时，AIX将以如下方式启动子进程：sh-cexec 。
Set the path variable to include c: \ WSDK \ bin and c: \ WSDK \ SDK \ bin and run the following command: wsdkconfig.
设置路径变量使之包括c： \wsdk \bin和c： \ wsdk \sdk \ bin，并运行wsdkconfig命令。
If CLASSPATH is set correctly and the software really is installed in c: \ Derby, the command shown in Listing 4 reports useful version information.
如果正确设置了CLASSPATH，并且在c： \ Cloudscape_10 . 0中真正安装了Cloudscape，那么清单4中展示的命令就会报告有用的Cloudscape 10.0版本信息。
Restart your plackup command (type Ctrl+C to stop the process, then run plackup 1.psgi to start it).
重新启动plackup命令（输入Ctrl+C停止进程，然后运行 plackup 1.psgi启动）。
It was based on an old-fashioned command line interface that confronted users with surly little prompts such as C:\>.
该系统建立于老式命令行界面之上，用户需要与干巴巴的提示性语言打交道，比如C:\>之类。
This command will compile the provided C-source code.
该命令将编译C 源代码。
Husband 1.0 must assume ALL responsibility for ALL faults & problems, regardless of root cause. To activate this great feature enter the command "C: I THOUGHT YOU LOVED ME".
必须假设老公1.0会对所有错误和所有问题负全部责任，无论错误的根源是什么。为了激活这一伟大特征，请输入指令“C：我认为你是爱我的。”
When nc is executed with the command-line parameters -l -p -c, it waits until it receives a connection to that port, and then it executes the command.
在使用命令行参数- l- p- c执行nc时，nc将一直等待，直到在该端口上接收到连接，然后执行指定的命令。
The -c argument lets you provide a command to the invocation.
c参数让您能够为调用提供一个命令。
Subdirectories can also be searched by using **/; the process is recursive, such as the find command, so that you can produce the equivalent of a find command, such as $ find . -name "*.c".
通过使用 **/，还可以搜索子目录；该过程是递归的，例如find命令，以便您能产生 find 命令的等效结果，例如 $ find. -name "*.c"。
应用推荐