On the study of combustion process of internal combustion engines, the combustion process is usually studied in the time region.
在内燃机燃烧过程的研究中，通常把燃烧过程在时域上展开，即制取示功图。
In order to study the fuel mass flow rate regulation characteristics of tube-in-hole for solid fuel ramjet, the flow field of turbulent combustion was numerically analyzed.
为了研究固体燃料冲压发动机内部套管结构调节燃料流量的特性，对某模型发动机的湍流燃烧流场进行了数值分析。
The study also shows that the ignition and combustion of boron particle lie on the resorting time and the environment temperature, and have no direct relationship with after-burning chamber's length.
研究还发现，硼颗粒的点火燃烧主要取决于硼颗粒在补燃室内的滞留时间和所处的环境温度，而与补燃室的长度没有直接关系。
Study shows that particle diameter, oxygen and temperature of combustion environment play an important role on burnout or time for burnout of coal.
研究表明，煤粉颗粒的尺寸大小、燃烧环境中的氧量及环境温度对煤粉的燃尽或燃尽时间有很大的影响。
Study results may serve as a reference for optimizing adjustment of boiler combustion control systems based on radiation energy intensity within furnaces.
研究结果为根据炉内辐射能强度的锅炉燃烧控制系统的调整提供了实验依据。
Study of the cornstalk in the grate firing boiler combustion characteristics, maintaining safe and economic operation of the boiler is of great significance.
研究玉米秸秆在层燃锅炉内的燃烧特性，对于保持锅炉的安全经济运行具有重要意义。
It can provide some theoretical bases for the further study on the mechanism of wood combustion and fire retarding treatment on wood.
通过本研究不仅可以对木材燃烧机理的深入研究，而且对于木材进行阻燃处理提供理论依据。
Based on the extensively study of micro scale combustion difficulties, the research trends of some typical micro engines are emphatically introduced.
本文在全面分析微尺度条件燃烧所面临的各种困难的基础上，重点介绍了几种典型的微型发动机的研究概况。
In this paper we mainly study one dimensional combustion problem both theoretically and numerically.
本文主要从理论和数值两方面来研究一维燃烧问题。
The study of droplet burning under microgravity is essential for the understanding of mechanism of combustion processes.
微重力条件下单滴燃烧的研究对于认识燃烧过程的物理机理具有重要价值。
Experimental analysis and study of the flue gas condensation unit is set or not on the catalytic combustion heater thermal efficiency.
通过实验分析和研究了烟气冷凝装置设置与否对催化燃烧热水炉热效率的影响。
Experiments had been conducted to study the mechanisms involved in the transition from smoldering to flaming combustion of polyurethane foam.
在聚亚安酯材料的稳定阴燃中，通过实验研究了阴燃向有焰燃烧转化的机制。
Study on the fundamental combustion characteristics of typical combustible components of MSW.
垃圾典型组分燃烧基本特性的研究。
This paper modified a quasi dimensional model and utilized it to study theoretically the combustion variations in spark ignition engines.
本文改进了一个火花点火发动机的准维计算模型，并对燃烧的循环变动进行了理论计算研究。
Finite element method is used in the study of nozzle damping of instable combustion in a solid rocket motor. Wave decline method is used in the experimental research.
应用有限单元法研究固体火箭发动机不稳定燃烧中的喷管阻尼，并用波衰减对比法进行了试验研究。
The high temperature combustion desulfurization possibility by fly ash remelting is study in vertical experiment cyclone furnace.
通过立式旋风炉实验台研究以飞灰重溶的方法解决高温燃烧固硫问题的可行性。
Experimental study was conducted of the combustion characteristics of this type of coal in a fixed-bed furnace.
并在一个固定床燃烧试验台上对这种复合型煤的燃烧特性进行了研究。
A study of aluminum droplet ignition and combustion through an advanced experimental technique in normal and low gravity environment is presented.
通过一种先进的实验手段研究了铝液滴在常重力和失重两种不同环境下的点火及燃烧特性。
An experimental study was carried out on temperature distribution characteristics of superadiabatic combustion in porous media with reciprocating flow (RSCP).
通过实验研究了多孔介质内往复流动下超绝热燃烧温度分布特性。
Experimental study was conducted of the combustion characteristics of this type of honeycomb briquette in a fixed-bed furnace.
在一个固定床燃烧实验台上对这种复合蜂窝煤的燃烧特性进行了研究。
Through summarizing the study of coal combustion, one dimension unburned carbon content in fly ash forecast model is established in which combustion and heat transfer are combined.
通过总结前人对煤粉燃烧的研究，建立了一个将炉内燃烧和传热相耦合的飞灰含碳量一维预测模型。
This paper presents an experimental and computational study on the combustion and exhaust emissions in a direct injection compression ignition engine operated on dimethyl ether (DME).
在一台直喷式压燃发动机上开展了二甲醚燃烧与排放特性的试验与数值模拟研究。
On this basis it makes some study on the combustion process of hydrogen-fueled IC engine by changing the ignition advance angle and equivalence ratio of the model.
在此基础上，进行了点火提前角和燃空当量比对氢内燃机燃烧过程的影响研究，为合理组织氢内燃机的燃烧过程研究提供了依据。
This paper makes an analysis and study of the combustion control system of a parallel boiler in detail and also puts forward a new combustion control system for use with the parallel boiler.
本文对母管制并列运行锅炉燃烧自动控制系统进行了详细地分析和研究，提出一种并列运行锅炉燃烧自动控制系统。
Study results indicate that puffing combustion is occasioned by periodical pressure oscillations, which demonstrates the existence of combustion oscillations in the furnace.
研究表明，燃烧“喘息”现象是由燃烧压力周期波动引起的，说明炉膛内存在燃烧振荡。
In this paper a study on the laser holographic interferometric technique for measuring the temperature field in combustion chamber is presented.
本文对用激光全息干涉技术测量内燃机燃烧室内温度场进行了研究。
This paper reported a dynamic visualization photographic setup with multiple functions to provide an important mean to study combustion and the form of emission.
为研究发动机的燃烧和排放形成，研制了一种多功能可视化摄影用的动态燃烧装置。
Study on the laminar combustion characteristics of low calorific value gas fuel provide people with an overall understanding of the fuel combustion quality.
对低热值气体燃料层流燃烧特性的研究可对燃料的燃烧品质进行全面的了解，为其在发动机上的应用提供理论基础。
A sedimentation furnace was employed as a combustion device to study the characteristics of primary particulate matter formed after the burning of pulverized coal of different particulate diameters.
以沉降炉作为燃烧设备来研究不同粒径煤粉燃烧后形成的一次颗粒物的特性。
A systematic study on emissions and control of nitrogen oxide, toxic trace elements and submicrometer particles during coal combustion was conducted.
对煤燃烧过程中氮氧化物的前驱体、有害痕量元素及亚微米颗粒物的排放与控制进行了系统的研究。
应用推荐