As a result, with introducing this kind of additive, the sinter yield elevated, cold strength and RDI of sinter improved.
试验结果表明：配加硼灰泥粉后，烧结矿成品率提高，冷强度和低温还原粉化性能改善。
In 2, when the cold weather comes, can play a strong cold strength and warmth; the weather is warm, is like cool like light and comfortable.
在寒流来袭时，能发挥强大的御寒力和保暖性；天气较暖时，则犹如凉被般轻爽舒适。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。
It is suggested that to more efficiently improve the cold strength and hot strength of the coke, the coking time should be properly prolonged if production conditions are permitted.
建议在生产条件允许的情况下，应适当延长结焦时间，可以改善焦炭的冷热态强度。
The effects of coal from different mines and hot briquetting process parameters on the cold strength of CCB were investigated, as well as the mechanism of acquiring high strength of CCB.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。
I heaved again at my sledge, my strength boosted by visions of a cold, lonely death.
我再次去推动的雪橇，想到自己会在寒冷中孤独地死去，我力气倍增。
The waters of the Arctic are particularly perilous for drilling because of the extreme cold, long periods of darkness, dense fogs and hurricane-strength winds.
对于海上钻探，北极的水域特别危险，因为极端寒冷，长时间的黑暗，密雾，以及飓风强度的大风。
With increasing melting temperature, the cold crystallization peak temperature increases, the crystallization peak strength of PEEK weakens and the peak width increases.
熔融温度升高时，聚醚醚酮的结晶峰强度减弱，峰宽增加；而冷结晶峰温度提高。
On the other hand, both the glass temperature and cold crystallization peak temperature of PEEK increases and melting peak strength decreases while the melting time becomes longer.
熔融时间延长时，聚醚醚酮的玻璃化转变温度和冷结晶峰温度均提高，熔融峰强度减弱。
Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.
经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。
Based on the production condition, a rational cooling schedule was established for improving the product strength and malleability to fit the subsequent cold rolling process.
为提高产品的强度及韧性，适应以后的冷轧工艺，根据某厂现场条件，制定了合理的冷却制度，效果良好。
Cold extrusion punch is an important workpiece in punches and its strength analysis is a key component in punch design.
凸模是冷挤压模具中重要的工件，其强度计算是模具设计的一个主要课题。
Due to the effect of strain hardening, higher amount of cold deformation resulted in superior room temperature strength and inferior torsion ductility.
由于加工硬化效应的影响，随着冷拔变形量的增加，合金丝材的室温强度增加，扭转塑性下降。
This paper mainly presents that constructional mid-carbon alloy steel, after bulk moulding deformation, heat treatment and cold surface deformation can raise fatigue strength of materials effectively.
本文主要介绍中碳合金结构钢经整体塑性变形、热处理后再进行表面冷变形工艺是提高材料疲劳强度的有效途径。
Core of large roller cold upsetting die made of ld steel has more ideal hardness, strength, anti wear capacity and impact toughness.
采用LD钢制造大型滚子冷镦模具的模芯，具有较理想的硬度、强度、耐磨性和冲击韧性。
It is concluded that, the residual stress induced by cold expansion can maintain enough strength to prevent and retard fatigue crack initiation and growth in rail bolt hole.
结果表明，冷扩张过程所引入的切向残余压应力能保持足够的强度，以对钢轨螺栓孔起到显著的防裂和止裂作用。
The influences of liquated zincing and cold-drawing on the mechanical properties of high strength dual phase steel wires have been investigated.
本文研究了热镀锌及镀后冷拔对高强度双相钢钢丝力学性能的影响。
High strength, and creep resistance, high tenacity, qualitative hard, no cold rheology, mechanical properties with temperature rises, the reduced.
强度高，抗蠕变性能高，坚韧、质硬，无冷流变性，力学性能随温度升高而降低。
The relationship between strength and ductility was studied by statistical method, and the effect of cold processing on aging characterization was also investigated.
采用统计方法研究了强度与塑性关系，并研究了冷加工对时效性能的影响。
Cold worked reinforcement loses more strength than hot rolled bars.
冷处理钢筋比热处理钢筋丢失更多强度。
This article proves that rolling operation can largely enhance fatigue strength through the research on the cold rolling operation of thread root of the drilling tool joint.
通过石油井下钻具接头螺纹冷滚压工艺的研究可以证明冷滚压可大大地提高接头的疲劳强度。
Some people feel dizzy and have no strength to do their work, some people are easy to catch the cold.
一些人感到眩晕，没有力气去工作，一些人很容易感冒。
Studyes the influence of the strength of cold state and hot function on the anthracite coal increased the deal.
研究了无烟煤添加量对焦炭冷态强度和热性能的影响。
But the anthracite coal increased the deal not very, the cold state strength descented is not much.
但无烟煤添加量不大时，冷态强度下降不多。
Research the result discovers, the anthracite coal ACTS for the thin coal coke and would lower the cold the strength of state of the coke.
研究结果发现，无烟煤替代瘦煤炼焦会降低焦炭的冷态强度。
Calculating procedures and formulas of double circular tooth strength for cold metal saw are given in this paper.
给出了较为完整的双圆弧锯齿的强度计算步骤和计算公式，以供锯片的设计、制造者参考使用。
The results show that a certain amount of the mixed rare earth oxide content in the batch can increase the cold compression strength and the thermal shock resistance of the bricks.
试验结果表明，在配料中加入适量混合稀土氧化物对提高耐火制品的常温耐压强度和热震稳定性能是有益的。
Product has outstanding advantages, acid, alkali, oil, cold, high tensile strength and elongation at break, good performance.
产品具有突出优点，耐酸、耐碱、耐油、耐寒、拉伸强度高和断裂伸长率等良好的性能。
Product has outstanding advantages, acid, alkali, oil, cold, high tensile strength and elongation at break, good performance.
产品具有突出优点，耐酸、耐碱、耐油、耐寒、拉伸强度高和断裂伸长率等良好的性能。
应用推荐