These Numbers represent a Unicode character, not a character in the code page of the input message.
这些数字表示一个Unicode字符，而不是输入消息的代码页中的一个字符。
A method to code character image based on information of run length is presented, which can save a mass of file Spaces with binary form to access data.
提出用行程段信息表示字符图像的编码方法，以二进制形式存取，能节省大量的文件存储空间。
That original Kindle, code-named "Fiona" after a character in Neal Stephenson's futuristic novel The Diamond Age, was finally ready to go in the fall of 2007.
最初的Kindle以尼尔·斯蒂芬森的科幻小说《钻石时代》中的一个人物命名，代号为“菲奥娜”，终于准备在2007年秋季上市。
Much of the information above specifies character code set conversions so that the client and server can understand one another.
以上大多数信息指定了字符代码集转换，这样客户机和服务器就能够互相理解。
To use a symbol in your text, you must set it up as an entity using its character code.
如果要在文本中使用符号，必须使用它的字符代码将它设置为实体。
Note: Some code listings may have a backslash character, "\", to indicate the line of code is continuous but has been formatted for readability.
注意：有些代码清单有反斜杠字符“\”，这表示代码行是连续的，但为了可读性，这里对其格式作了调整。
He said that the character of the code inside the Rustock malware and the way the giant network was run suggested that it was operated by a small team.
他说藏在恶意软件中的代码的特点和这个网络巨人的行事方式暗示了这个僵尸网络只被一个小团队操控。
If you want to match a pattern multiple times within a character sequence, the above code snippets are a good place to start.
如果您想在一个字符序列中多次匹配一个模式，上面的代码片段是一个很好的起点。
A character can be represented using one or more of the code units of a respective encoding.
可以使用一个或多个各自编码的代码单元来表示字符。
When issuing queries against XML data that contains characters outside the database code page, attempt to use decimal or hexadecimal character references.
当对包含数据库代码页之外字符的XML数据发出查询时，尝试使用十进制或十六进制字符引用。
The character is specified as one or two UTF-16 code units in hexadecimal notation.
这个字符指定为十六进制形式的一个或两个UTF - 16编码单元。
Synchronization performance varies with the JVM, processor, workload, JIT activity, number of processors, and the amount and character of code being executed using synchronization.
同步性能会随着JVM、处理器、工作负载、JIT活动、处理器数量以及正同步执行的代码的数量和特征而变化。
CDATA is the XML command that tells the viewer to stop parsing the code and read the code within the block that follows as character data.
CDATA是XML命令，它告诉查看程序停止解析代码，并读取接下来的块中的代码，这里的代码是字符数据的形式。
The collating sequence maps the code point to the desired position of each character in a sorted sequence.
排序序列将代码点映射至每个字符在已排序序列中的期望位置。
It separates code from character forms, so the same code can be used again and again, even to render different orthographies in the same application.
它将代码与字符的格式区分开来，因此相同的代码可以反复使用，甚至是在相同的应用程序中呈现不同的拼字法都可以。
When you encounter problems with character conversions, first identify which code pages are being used by the application and the DB2 UDB database server involved.
当您碰到字符转换方面的问题时，首先要识别应用程序和所涉及的DB 2UDB数据库服务器使用哪些代码页。
Take Listing 9, which creates a collection of character documents, each containing the string representation of the character and its associated ASCII code.
以清单9为例，它创建一个字符文档集合，每个集合都包含字符的字符串表示形式及其关联的ASCII代码。
A character code is the representation in numeric form of a particular character mapping from numeric to a particular character.
字符代码是特殊字符的一种数值形式，将数值映射为一个特殊字符。
The different code executes in terms of the character is in "a-z", "a-z", or "0-9".
根据字符是“a -z”、“a - z”还是“0 - 9”，分别执行不同的代码。
You can also specify a default encoding for all XML documents or for only a specific file (see Validating and character encoding XML code below).
也可以为所有的XML文档或只为特定的某个文件指定缺省编码(请参阅下面的验证XML代码并对其字符进行编码)。
The escape function replaces almost any non-alphanumeric ASCII character with % followed by the two-digit hexadecimal code of the encoded character.
escape函数用%后跟被编码字符的两位16进制码代替了几乎所有非字母数字的ASCII字符。
Figure 2 depicts a scenario where data transformation occurs between disparate Single Byte Character Set (SBCS) code pages labeled by the encoding scheme.
图2描述了一个场景，数据转换在又编码计划标记的不同的SingleByteCharacterSet (SBCS)编码页之间发生。
The code reader creates a character buffer from the source file, the scanner combines characters into ITokens, and the parser combines ITokens into IASTNodes.
代码阅读器从源文件中创建一个字符缓冲，扫描器将字符组合到IToken中，解析器将IToken组合成IASTNode。
World of Warcraft handles player identification differently, so we still need to determine whether adding a character code system like in StarCraft II is the best solution.
《魔兽世界》的身份标识系统有所不同，所以我们仍需确定引入类似星际2中的角色代码系统是否就是最好的解决方法。
The 10xxxxxx byte is a continuation byte with the XXXXXX bit positions filled with the bits of the character code number in binary representation.
字节10xxxxxx是一个扩展字节，它的xxxxx x位位置被以二进制表示的字符代码号的位所填充。
Since the lines in the address are separated by normal line separators (the "\ n" character), the code needs to replace these with XHTML-style line separators, s.
因为地址中的行用一般的行分隔符(“\n”字符)分隔，代码中需要用XHTML风格的行分隔符来代替。
The code point for this substitution character differs depending on the target code page, but for code page 819 (ISO-8859-1) it is the hex character 0x1A.
取决于目标代码页，这个替换字符的代码点可能有所不同，但是对于代码页 819 (ISO-8859-1)，它是十六进制字符0x1A。
Validating and character encoding XML code.
验证XML代码并对其字符进行编码。
StarCraft II already uses a character name and character code combo in-game, which serves as a unique player identifier and fits well with our goal for the forums.
《星际争霸2》已决定在游戏中使用角色姓名和角色代码的组合显示方式，做为玩家的独特身份标识服务非常符合我们的论坛建设目标。
When Posting on the forums of the new StarCraft II community site, players will be Posting using their StarCraft II character name and character code.
当玩家在新的星际争霸2官方论坛上发帖时，将会显示他们的角色姓名和角色代码。
应用推荐