The coating layer has a nanoscale thickness.
该涂层具有纳米级厚度。
Ni-P coating layer has higher hardness and good wear resistance.
镀层具有较高的硬度及耐磨性。
A coating layer can be prepared outside the pastille coating layer.
在含药包衣层外还可有包衣层。
The adhesive force between the coating layer and matrix is about 15N.
涂层与基体之间结合力为15N左右。
The superficial grain noise of coating layer on battery electrodes is bad.
极片涂敷层表面颗粒噪声较强。
The oral pharmaceutical formulation contains a core and a drug coating layer.
所述口服药物制剂含有核和药物涂层。
The coating layer of silica and magnesium oxides was prepared by sol-gel method.
硅镁氧化物包覆层采用溶胶-凝胶法制备，由正硅酸乙脂水解和缩聚得到。
The properties of coated paper are mostly depended on the coating layer structure.
涂布纸或纸板的涂布性能受涂层结构的特性影响较大。
The (results) reveal that the coating layer of aluminum hydroxide is loose and porous.
结果表明，氢氧化铝所形成的包覆层是疏松和多孔的。
This paper introduces some characters of coating layer of the Ink Jet photo grade paper in brief.
简单介绍了喷墨打印照片纸的涂层特点。
Because the surface coating layer is semiconductor, the products have good electrical conductivity.
由于表面包覆层为半导体，产物导电性较好。
The empirical formula can be applied to various material combinations and coating layer thicknesses.
该经验公式可以适用于各种材料组合和薄膜涂层的厚度。
The permeability measuring method and process of the lost foam pattern coating layer was introduced.
介绍了测定消失模涂料透气性的方法及过程。
Widely water retention adjustment range - can select high water retention or good coating layer structure.
广保水调节范围-可以选择高水保留或良好的涂层结构。
In this paper, the experiment was designed to study tool with single coating layer and several coating layers.
通过多次实验，将单涂层与复合涂层硬质合金的刀具寿命作了比较。
Therefore, it is essential to study the coating layer structure for improving the quality of the coated paper.
为了提高涂布纸的质量，涂层结构的研究是十分必要的。
Exothermic efficiency, metallographical structure and transition region of coating layer were also investigated.
还研究了放热效应，金相组织与涂层过渡层。
With the increase of coating layer thickness and the decrease of permeability, the peak values and time increase.
涂层厚度增加、透气性下降，则传输曲线峰值增加，时间延长。
Based on the radiation transfer equation, light scattering by coating layer is studied by using Monte Carlo method.
基于辐射输运方程，运用蒙特卡罗方法研究具有任意涂层的光散射。
A product that includes a cement-based substrate, a first coating, and a topcoat powder coating layer is described.
本发明描述了包括水泥基基材、第一涂层、和粉末涂料顶涂层的产品。
With the progress of technology, several surface analysis techniques are applied in studying coating layer structure.
随着技术的不断进步，一些表面分析技术逐渐地被应用于涂层结构的分析中。
The coating layer hardness depends not only on the coating material, but also on the applied load and coating layer thickness.
涂层硬度不仅取决于涂层材料本身，同时还与试验负荷和膜层的厚度密切相关。
Through experimental comparison, the new process method can significantly improve the contact fatigue life of the coating layer.
通过实验对比，这种新工艺方法可以显著地提高涂层的接触疲劳寿命。
A moving patch clamp bath with a cell growth matrix coating layer relates to the patch clamp bath for electrophysiology experiment.
带细胞生长基质涂层的活动式膜片钳浴槽，它涉及一种电生理学实验用的膜片钳浴槽。
Preferably, said protective coating layer is a single protective coating layer which is disposed in contact with said glass portion.
优选地，所述保护涂层是设置与所述玻璃部分接触的单一保护涂层。
The strength of coating layer obtained by one-shot self-felt powder with subsonic oxygen-acetylene spraying technique was discussed.
采用亚音速氧乙炔火焰喷涂技术，喷涂一次性自粘结粉末，经测定涂层的结合强度可达到打底层的界面结合强度。
The results show that Ni co Mn coating layer has higher comprehensive performance and much lower cobalt content than Ni co and Ni Mn layers.
结果指出，镍钴锰三元合金镀层具有比镍钴或镍锰镀层更高的综合机械性能和低得多的钴含量，更适合于制造电镀金刚石钻头。
The zinc plating could be used as bottom of chemical nickel plating and could deposit other protecting decorating metal coating layer on it.
所得锌镀层可 以作为化学镀镍的底层，也可以在其上沉积其它防护装饰性金属镀层。
This paper presents a new method in which the coating layer is absorbed by low vacuum for determining the permeability of coating used in casting.
提出了用负压吸附涂料层的方式测试涂料透气性的新方法，并推导出了在该方法下计算涂料透气性的数学表达式。
From the equipment point of view a discussion is made on the factors that affect the evenness of pretreated layer and coating layer and solidification system.
文中从设备角度出发，对预处理均匀性、辊涂均匀性、固化制度等影响因素进行了探讨。
应用推荐