The circuit has the function of thermal shutdown, current limiting and closed control loop of current and voltage.
该电路具有过热保护、短路保护功能和电流、电压闭环控制回路功能。
The control scheme and operating principle of a double closed-loop AC/DC power converter system are discussed by using physics.
从物理角度讨论了双闭环交/直流功率变换器系统的控制方案和工作原理。
The system shown in Figure 3 is that of a closed loop, with sensors feeding the control system that drive changes in the environment.
图3所示的系统是一个封闭循环，传感器负责为控制系统提供数据，而控制系统则驱动着环境中因素的变化。
Closed loop configuration (CCL) is commonly used as a synchronous deploying control mechanism of appendages.
绳索联动机构（CCL）是航天器上最常用的附件同步展开控制机构。
Simulation results show that, in the closed-loop system, precise attitude control is accomplished in spite of the uncertainties and external disturbances in the system.
仿真结果表明：即使系统存在不确定性和外界干扰，仍可在闭环系统中实现精确的姿态控制。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
At the same time using Holzer sensors will be converted into pulse frequency motor speed feedback to the MCU, realize the speed closed-loop control, to achieve speed detection.
同时利用霍尔传感器将电机速度转换成脉冲频率反馈到单片机中，实现转速闭环控制，达到转速检测目的。
In this paper, the closed-loop control method of hybrid step motor using the harmonic back EMF is investigated.
研究了利用谐波反电势信号实现混合式步进电动机闭环控制的方法。
On this base, the closed - loop control method of hybrid step motor using the harmonic back EMF is investigated, and the microcomputer control system of step motor is designed.
在此基础上研究了利用谐波反电势信号实现混合式步进电动机闭环控制的方法，设计了步进电动机的微机控制系统。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
Measurement principle of three coordinate measuring machine based on half-closed loop control is introduced.
介绍了一种基于半闭环控制的三坐标测量机的测量原理。
The closed loop control of the motor position and velocity are realized using the microcomputer.
采用计算机实现了变磁阻电机的位置和速度闭环控制。
Opened and closed loop control was chosen to control method of the motion track of AGV to its position and orientation.
在对AGV的定位轨迹控制方法上，选定了位姿开环控制与闭环控制相结合的方式。
Closed loop feedback adopts PID control rule to insure the stabilization of magnification times.
闭环反馈采用PID这种最广泛使用的控制规律，以保证放大倍数的稳定。
The press takes use of advanced two-way cartridge valve system and imported electric pump technology which can realize double closed loop control of pressure and flow rate.
液压系统采用了先进的二通插装阀系统、进口高性能的电子泵技术，实现了主缸压力与流量的双闭环控制；
The multi-channel closed loop control system is easily programmed to handle event as well as time dependencies.
多渠道的闭环控制系统是轻松编程处理活动，以及随着时间的依赖性。
The control laws of the inner closed loop system and post stall maneuver are obtained through using symbol operations design.
使用符号运算方法设计了系统闭环控制律和大攻角下的过失速控制律。
To realize real time closed loop control, high performance 16-bit DSP TMS320F240 is adopted as control kernel.
控制系统以16位数字信号处理器TMS320F 240为核心，对整个电源进行了实时的闭环控制。
The formation of many closed loop control by the screening equipment to achieve the required size.
形成闭路多次循环，由筛分设备控制达到所要求的粒度。
Microprocessor, dedicated motion controller and driver, optical electronic encoder were used to realize servo closed-loop motion control.
采用微处理器、专用的运动控制和驱动芯片以及光电编码器实现了机器人关节的伺服闭环运动控制；
The knock threshold detection is the key of gasoline engine knock detection, and it is the key of the closed loop ignition control of gasoline engines.
汽油机爆震的难点是爆震边缘点检测，爆震边缘点是汽油机点火闭环控制的前提。
The closed loop control of the stabilizing platform on the rotary steering drilling system is the key technique of the modulating rotary steering drilling system.
旋转导向钻井工具稳定平台的闭环控制是调制式旋转导向钻井系统的关键。
The control system is composed of the engine control automatic shifting control, torque converter lockup closed-loop control, and shift quality control etc.
控制系统是由发动机控制、自动换挡控制掖力变矩器闭锁闭环控制换挡品质控制等部分组成。
Networked control systems (NCS) are a kind of closed-loop control systems where the sensors, the controller and the actuators exchange data through network.
传感器、控制器与执行器的数据经网络进行传输与交换的闭环控制系统称为网络控制系统。
Networked control systems (NCS) are a kind of closed-loop control systems where the sensors, the controller and the actuators exchange data through network.
传感器、控制器与执行器的数据经网络进行传输与交换的闭环控制系统称为网络控制系统。
应用推荐