Some devices have two clocks, one to "capture" or "display" data, and another to clock it into the device.
一些设备有两个时钟,一个用于“捕获”或者“显示”数据,另一个则用于提供将数据输入器件的时序。
AGI could, its advocates say, work for us around the clock, and drawing on all available data, could suggest solutions to many problems.
那些拥护通用人工智能的人说,它可以全天候为我们工作,利用所有可用的数据,为许多问题提出解决方案。
It can work either in dynamic or in static state and it also has the functions such as parameter setting, clock setting, data real time displaying, saving, accessing, up sending etc.
实现了动态测量和静态测量,具有参数设置,时钟设置,数据实时处理、显示、存储、查询以及上传等功能。
For substation layer, a feasible strategy for bad data grading handling and a practicable method to establish the uniform clock for the power network were put forward.
对于厂站层,论文提出了对不良数据分级处理和建立全网统一时钟的策略和方法。
The communication protocol could solve the issue of identifying the data boundaries and the phase error caused by the accumulated error of clock.
协议能有效解决数据边界识别问题和时钟累积误差造成的相位偏差问题。
A data clock output (DCO) for capturing data on the output and a frame clock output (FCO) for signaling a new output byte are provided.
它提供一个数据时钟输出(DCO)用于在输出端捕获数据,以及一个帧时钟输出(FCO)用于发送新输出字节信号。
The data acquisition system consists of the signal conditioning circuit, DSK interfacing circuit, RS-485 communication interfacing circuit, system clock circuit, the power circuit, and so on.
数据采集系统包括信号调理电路、DSK接口电路、RS- 485通信接口电路、系统时钟电路及电源电路等。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
转换过程和数据采集过程通过CS和串行时钟信号进行控制,从而为器件与微处理器或DSP轻松接口创造了条件。
After the stop bit is received, the device will acknowledge the received byte by bringing the Data line low and generating one last clock pulse.
在收到停止位之后,设备将通过拉低数据线,生成最后一个时钟脉冲来应答收到的字节。
It emphasized the programming thoughts of data collection, display, storage, clock control and RS485 communication in software design.
着重阐述了软件设计中数据采集、显示、存储、时钟控制、RS485通信的编程思路。
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs.
转换过程和数据采集过程通过CS和串行时钟进行控制,从而为器件与微处理器或DSP接口创造了条件。
The function of display panel is to carry on the data scanning for LED Displaying Screen and display a complete image under the controlling of the clock.
显示板的功能是在时钟控制下,对LED大屏幕进行数据扫描,显示一幅完整的图像。
In binary synchronous communication, the use of clock pulses to control synchronization of data and control characters.
在二进制位同步通信中,使用时钟脉冲来控制数据和控制字符的同步。
The latter provides the control and clock signals for the driving circuitry on screen and accomplishes the video data processing.
后者为屏上驱动电路提供控制、时钟信号,完成视频数据的处理。
The FIFO module in FPGA was applied to realize the pixel clock modification and the data saving and taking.
采用FPGA内部集成的FIFO模块实现像素时钟的改变和图像数据的存取。
Compared with conventional circuits, the recovered parallel data is bit-synchronous, and the reference clock is avoided.
与传统并行数据恢复电路相比,该电路不需要本地参考时钟,并且恢复出的并行数据是位同步的。
The protocol realized some functions, such as two-way data buffer, shift register, clock circuit and parity check.
在通信协议中,主要实现了双向数据缓冲器、数据移位寄存器、时钟控制电路以及奇偶校验等功能。
Hardware in this system is made up by data acquisition module, data storage module, data transport module, real-time clock, power supply and so on.
系统硬件由数据采集、数据存储、数据传输、实时时钟、电源等模块组成。
The preprocessor can extract clock information from NRZ data stream, which consists of a delay cell, a multiplier and a narrow-band filter.
预处理器主要有延迟单元、乘法器和窄带滤波电路构成,可以从NRZ数据中得到时钟信号。
And, the system can realize functions of automatic irrigation, drainage warning, real time clock, historical data inquiry, data up-transmission and two-way communication.
系统能够实现自动化灌溉,具有排水警示、实时时钟、历史数据查询、数据上传及双向通信等功能。
With time series simulation software, the CPU's I/O ports simulate I2C bus and exchange data with clock chips, temperature humidity sensors, memory chips and other devices.
采用软件模拟时序使CPU的I/O口模拟I2C总线,实现了单片机与时钟芯片、温湿度传感器、存储芯片等器件的数据交换。
And the selection and design of switch-in module, switch-out module, communication module, clock module, data storage module, keys module and frequency detecting module are also discussed.
论文中还给出了开关量输入、开关量输出、通信模块、时钟电路、数据存储器、按键电路和频率跟踪电路等各功能模块的选择方法和设计原理。
Based on real time clock of GPS system, and by means of absolute time-marker, real time data acquisition between different sites was performed in the form of wireless.
以GPS系统实时时钟为基础,通过对绝对时标加以处理,以无线方式实现了不同站点之间的实时数据采集。
The three key technologies of tobacco toasting autocontrol system are to be realized stably temperature collecting, to be protected data after turn-off, and real time clock function.
烟叶烘烤自动控制系统的三大核心技术是实现稳定的温度采集、掉电保护、实时时钟功能。
During a READ operation, When this command is issued, data outputs are disabled and become high impedance after two clock delay.
在读操作中,如果发出了这个指令,那么两个时钟周期后,读出数据无效,数据总线进入高阻状态。
Simulation of relative delays between Data and Clock pulse trains in 0.1 microseconds increments to 3.1 microseconds.
对于数据和时钟脉冲列之间的相关延迟的模拟,以0.1微秒为递增单位增加到3.1微秒。
It is estimated that a data and clock recovery module with a higher operating rate is available only if some devices are changed.
可以预计,只要在器件上作某些更换,亦可制成工作速率更高的时钟数据恢复模块。
If it's not, the host is inhibiting communication and the device must buffer any to-be-sent data until the host releases Clock.
如果不是,主机禁止通信,设备必须缓冲任何要发送的数据,直到主机释放时钟。
Serial communications based on SERDES adopt the clock_data recovery(CDR) instead of both data and clock transmitting, which solve the problem of clock skew.
基于SERDES的串行通信过程中采用时钟和数据恢复技术(CDR)代替同时传输数据和时钟,从而解决了限制数据传输速率的信号时钟偏移问题。
Serial communications based on SERDES adopt the clock_data recovery(CDR) instead of both data and clock transmitting, which solve the problem of clock skew.
基于SERDES的串行通信过程中采用时钟和数据恢复技术(CDR)代替同时传输数据和时钟,从而解决了限制数据传输速率的信号时钟偏移问题。
应用推荐