The hardware and software composition, the design of parameter detection and processing circuits and system interface are introduced concretely. The main specifications are given.
具体介绍工业酸度计硬件、软件组成，参数检测及处理电路的设计，系统接口设计，给出了主要技术性指标。
Neuromorphic circuits mimic biological structures found in the nervous system, such as the cochlea, retina and brain cells.
神经形态电路对神经系统内发现的生物结构，如耳蜗、视网膜和脑细胞进行仿生。
They can then use specific colors of light to activate or silence particular cells and circuits, which in turns reveals the role that those cells and circuits play in the broader nervous system.
然后利用一些特殊颜色的光线使特定的细胞和回路活跃起来或者保持安静，借此他们可以发现这些细胞和回路在更大范围的神经系统中所扮演的角色。
Test continuity of circuits using test equipment to ensure compatibility and safety of system, following installation, replacement or repair.
使用测试设备测试电路的连续性，以确保系统的兼容性和安全性，随后进行安装，更换或维修。
During the design of hardware circuits and printed circuit board, we take a series of measures to design the reliability of the system.
在硬件电路设计和印刷电路板设计过程中，采取一系列措施对系统进行了可靠性设计。
Single frequency source is usually used as local oscillator in communication system and radar system, also as a reference clock in digital circuits, so it is a extensive-applied technique.
固定频率源可以在在通讯系统和雷达系统中作为本机振荡器，也可以作为数字电路的基准时钟信号，因此得到了广泛的应用。
In the thesis it analyses the hardware performance requirements and the software functions of the system and designs the hardware circuits and the software function modules after analysis.
论文对系统硬件性能要求以及软件功能进行了分析。进而，设计了系统的硬件电路和软件功能模块。
The switched reluctance drive is a new variable-speed motor system which consists of power electronically-switched circuits, doubly salient reluctance motor and controller.
开关磁阻电机是由功率开关电路、双凸极磁阻电机及控制器构成的新型调速电动机系统。
The development trends of integrated circuits used in SPC telephone switching systems, system architecture, features and requirements of the switching systems are discussed.
本文对程控数字电话交换机所用的集成电路器件，交换机的系统结构以及性能要求的发展趋势进行了讨论。
Combining the nonlinear control system theory and the aim of chaos synchronization, we designed a nonlinear feedback controller for synchronizing the scalar output signal of Chua's Circuits system.
把非线性系统的微分几何理论与混沌系统的同步控制目标相结合，设计了蔡氏电路混沌系统的标量混沌信号同步控制的非线性反馈控制器。
As a special interface connected with analog and digital circuits, high performance analog-to-digital converter is much more important in whole system design.
作为模拟电路与数字电路的接口电路，高性能的模数转换器对整个设计系统的实现非常重要。
Relays are the logic elements of a protection system which sense the fault and cause the circuit-breaker trip circuits to be energized and the breakers to open their contacts.
继电器是保护系统的逻辑元件，它感知故障，并使断路器解扣电路带电和断路器打开触点。
The complete scheme of measuring circuits and the system of hardware and software of the microcomputers are particularly introduced.
详细地介绍了测量电路、微机硬件和软件系统的实现方案。
The trend is to integrate the memory arrays and controller circuits of a system together on one or more integrated circuit chips.
趋势是将系统的存储器阵列和控制器电路一起集成在一个或一个以上集成电路芯片上。
The original LSI, which took the formerly complicated CD player and collected the control system and signal processing system circuits into just two groups.
独创的大规模集成电路，将原来复杂的CD播放器和采集控制系统，信号处理系统的电路合并到两路。
Built-in power amplifier circuits that can be a small system, and strong signal by cutting the main priority control.
内置功率放大电路，可以单独成为一个小系统，并受主信号强切优先控制。
High speed digital circuits require higher reliability and lower complexity of power distribution system.
高速数字电路对电源分配系统的可靠性和复杂性提出了很高要求。
The design of circuits and signal processing concerning this sensing system are presented.
给出了传感系统的电路设计以及信号处理方法。
Taking TMS320LF2407 as the core, the hardware circuits and the software programs of FCEV discrete-time MRAC system are designed.
以TMS320 LF 2407为核心设计了燃料电池车离散模型参考自适应控制系统的硬件电路和软件程序。
The constitute principle of the system, the speed closed-loop method and the function circuits of are expounded.
详细阐述了系统的组成，重点介绍了速度闭环方法和功能实现电路。
The various Components in the electric system include wiring Circuits, lighting systems, power seat and window adjusters, horns, and other electrical accessories.
电气系统中的各种器件还包括线路、照明系统、座位和车窗调节器、喇叭及其它电气器件。
The secondary system consists of step-down transformers and secondary circuits at utilization voltage levels.
二次配电系统是由降压变压器和满足最终用电设备电压等级的二次电路组成。
Ward call system is a communication equipment used frequently in ward. The article introduces the principle and the circuits of a self-designed simple ward call system.
病房传呼系统是医院病房使用频率最高的通讯设备。本文就自行设计的简易病房传呼系统的原理和电路做一介绍。
By combining software design and hardware circuit, the modularization of designing data acquisition circuits is fulfilled, and the accuracy and reliability of the system are enhanced.
通过软件设计和硬件电路的结合，实现了数据采集电路的模块化设计，提高了系统的精度和可靠性。
The paper introduces major circuits and programming method of numerical feed control system for grinder.
本文介绍了一种磨床数字进给控制系统的主要硬件电路及软件编程方法。
The article analyses wide Angle laser signal receiving system and the receive sensitivity of system, and studies the problems on circuits designing of laser receiving system.
对广角激光信号接收系统和系统的探测灵敏度进行了分析，研究了激光接收系统电路设计问题。
At last, the control system including the drive and protect circuits of the IPM and the current sample circuits and so on are designed.
最后设计调试了永磁电机直接转矩控制系统，包括IPM驱动和保护电路，电流电压采样电路以及转速采样电路等。
The main practical circuits and adjusted methods for stabilized system are given.
介绍了系统的主要电路及调整测量方法。
The design principle and process of digital programmable filter based on MAX262 in automatic detection system, and its circuits and program are introduced.
介绍了自动测试系统中基于MAX262的程控滤波器的设计原理及流程，给出了具体电路及程序。
The design principle and process of digital programmable filter based on MAX262 in automatic detection system, and its circuits and program are introduced.
介绍了自动测试系统中基于MAX262的程控滤波器的设计原理及流程，给出了具体电路及程序。
应用推荐