The comparator circuit may develop offsets, causing it to trigger early or late.
比较器电路也许会出现偏移量，导致触发时机的提前或是延迟。
The accuracy of delay or timing is not sensitive with monostable trigger circuit since electrical elements have influence on it.
使用单稳态触发电路作“延时”或“定时”用，由于受到元件和器件的影响，其精度不会太高。
Analysis and research were done for the trigger energy and time delay characteristics in the triggering process, using the energy storage and pulse formation trigger circuit to switch on the TVS.
本文采用辅助高压击穿与能量续流的触发电路来导通真空触发开关tvs，对触发过程中的触发能量和时延特性进行了分析和研究。
This article summarizes the hardware organization and working principles of the thyristor zeropassage trigger capacity control circuit which have a singlechip as its main body.
本文简述了采用单片机为主体构成的晶闸管过零触发调功装置的硬件构成和工作原理。
A cosine phase shifter is applied in phase shifting circuit to meet the possible maximum trigger current and voltage of thruster.
移相线路中配有与弦移相器以满足可控硅整流器最大可能触发电流和电压。
The zero voltage trigger for thyristor can be realized with simple transistor circuit.
单向晶闸管的电压过零触发可利用简单的晶体管电路。
The hardware composition, high precision conversion of temperature signal and the trigger control circuit for resistance furnace are introduced.
介绍了电阻炉温度控制系统的硬件组成、温度信号的高精度转换及触发控制电路。
MW DC arc furnace uses the current 2-transformer rectifier bridge thyristor controlled by adjusting the angle trigger to compose 24 pulse wave rectifier circuit.
MW直流电弧的电流控制采用2台整流变压器控制，通过调节晶闸管桥触发角构成24脉波整流电路。
The hardware circuit is simple, and it has strong reliance and anti-interference ability, which is a kind of ideal SCR trigger.
硬件电路简单，可靠性高，抗干扰能力强，是一种比较理想的晶闸管触发装置。
A tester is made based on the typical circuit of the monostable trigger made of 555 timers. It operation principle, coupling way and usage are analysed in great detail.
以555定时器构成的单稳态触发器这一典型电路为基础自制一种实用测试器，较详细的分析了该器件的工作原理、耦合方式、使用方法。
It is confirmed by the experiments that this revised circuit has an accurate trigger point, wider range, higher preciseness of time-phase and better stability.
经实验证实，该电路触发点准确，具有更高的时相精度、宽的触发范围和很好的稳定性。
The improvement of silicon-controlled trigger circuit.
可控硅触发电路的改进。
A scheme of bidirectional thyristor phasing trigger composed by ICs is presented, and the trigger circuit fit for AC voltage regulator of inductive load is given.
提出了一种由集成电路组成的双向晶闸管移相触发器的设计方案，给出了适合于感性负载的交流调压电源的触发电路。
The circuit including the main welding circuit, shows the interface, watch dog circuit, sampling circuit, trigger, synchronous circuit and electromagnetism gas valve etc.
包括焊接主回路、采样电路、触发电路、同步电路、电磁气阀启动电路、显示界面以及看门狗等电路。
In the digital circuit, the digital frequency meter belongs to the sequence circuit, it mainly by has the memory function trigger constitution.
在数字电路中，数字频率计属于时序电路，它主要由具有记忆功能的触发器构成。
This circuit is used in BES Trigger System to reject the background caused by interference in MDC.
该电路用在北京谱仪触发判选系统中，作为排除由于干扰信号造成主漂移室成片着火的本底事例。
An improved plan of silicon controlled rectifier (SCR) line type trigger is described in detail. Anew practical circuit of bipolar transistor trigger for high pulse repeat frequency is presented.
详细地介绍了可控硅整流器(SCR)线型触发器的改进型设计方案，提出了用于高脉冲重复频率的双极晶体管触发器的实用新电路。
Trigger circuit was used to adjust C15 and control recording time.
采取触控式延时控制电路，调节C15可控制每次录音时间的长短。
Based on study of the characteristic and operating principle of the cold-cathode trigger tube, a self-triggering crowbar circuit applied in MPM is proposed.
研究了冷阴极触发管的特性及工作原理，提出了一种应用于微波功率模块中的自触发撬棒保护电路技术。
In this background, with the application of CPLD in V-M System, a digital SCR trigger circuit with phase shifting is developed which is absolutely different from the former ones.
在此背景下，本次设计将CPLD引入到V-M系统中，开发出与以往脉冲产生方式相区别的数字式移相触发电路。
The circuits revelent to data acquisition system such as trigger circuit, the circuit of short time generator in random sampling etc, are designed, simulated and adjusted.
数据采集系统触发电路、随机采样短时间产生电路、存储器地址计数器电路等相关控制电路的设计、仿真和调试；
The circuit of controlling data acquisition and the trigger circuit of SCR are described in detail.
详细阐述了控制的数据采集和可控硅触发电路。
The preventative dithering trigger and mono-stability circuit was adopted to prevent dithering and repeated actions.
采用防抖动触发器和单稳电路防止抖动和重复动作。
It also discusses some key techniques such as the design of ECL circuit, high speed signal processing and external trigger control.
并对ECL电路、高速信号及外部触发控制等关键技术进行了详细的讨论。
This article proves that the integrated chip trigger circuit could be used in cutting and welding equipment and has good effects as well.
论述了集成芯片触发电路在切焊设备中的应用是可行的，并且效果良好。
It is perfect phase trigger circuit for arc welding power source of SCR.
该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
Button control digital potentiometer X9511 is consists of time delay circuit removed dithering, mono - stability circuit, preventative dithering trigger.
按钮式控制数字电位器x 9511由延时去抖动电路、单稳电路、触发器组成。
The thyristor triphase-bridge full controllable rectification circuit is taken as main circuit of the system and the trigger circuit with saw-tooth synchronism signal is adopted.
该系统以可控硅三相桥式全控整流电路构成系统的主电路，采用同步信号为锯齿波的触发电路。
The thyristor triphase-bridge full controllable rectification circuit is taken as main circuit of the system and the trigger circuit with saw-tooth synchronism signal is adopted.
该系统以可控硅三相桥式全控整流电路构成系统的主电路，采用同步信号为锯齿波的触发电路。
应用推荐