Controlling the hot charging temperature accurately has a very important significance for optimizing heating control.
准确掌握连铸坯热装温度对实施连续加热炉的优化加热控制具有十分重要的意义。
High power batteries require high current charging and discharging abilities, low charging temperature, and good safety assurance during tactic maneuver.
特种动力电池对充放电速度、充电温度、使用安全性等都有着很高的要求。
Analyses the influence of some factors on the operation performance of inner coil, such as coil material, soil type, charging temperature, fluid flux, coil spacing and moisture content of soil, etc.
分析了盘管管材、土壤类型、蓄冷温度、流体的流量、盘管间距以及土壤含水率等因素对管束内层盘管运行特性的影响。
And that does not count related parts like the system that maintains the temperature of the cells within an acceptable range and manages the charging and discharging.
这还不包含相关的零部件，如将电池片温度维持在可接受范围内和管理充放电的系统。
If low charging rate is desired, you should use the BREAK-IN mode. Charging in that mode is terminated by only time (1.6 times battery capacity) and temperature.
如果你想用很低的充电电流进行充电，应该使用BREAK -IN模式。此充电模式只会因为时间(1.6倍电池容量)和温度终止充电。
Although the temperature sensors will safeguard battery overheating, lower charging rate might not cause enough heating in the batteries to trip the sensors.
同样温度感应器会因为电池过热而终止充电，但由于充电电流太低，也不能另电池产生足够的热量让温度传感器感应。
Develop an application software adapt to hot sending and charging of CC billet, the hot installing temperature of billet is raised, the produced organizing and managing are promoted.
开发设计了一套适应于连铸坯热送、热装生产的应用软件系统，提高了热装温度，促进了生产组织和管理。
Is strictly prohibited in hazardous situations (inflammable, explosive or high temperature environment) to the JW7623 flashlight charging or random demolition flashlight.
严禁在危险场合(易燃易爆或高温环境)给JW7623手电筒充电或随意拆卸手电筒。
The factors for affecting coke rate were discussed such as coal injection, blast temperature, silicon content and charging patterns.
同时也讨论了喷煤、风温、铁水硅含量及装料制度对焦比的影响。
Through the tests of mechanical properties of charging hydrogen and the corrosion tests in loop water of high temperature and high pressure, hydrogen brittleness of T225NG Ti-alloy was studied.
通过渗氢试样的常温力学性能试验和双悬臂梁试样在高温高压高纯水中的腐蚀试验来研究t 225ng钛合金的氢脆行为。
Safer charging: Designers reduce excess heat by controlling the integrated circuit temperature and optimize thermal performance with a thermal-regulation loop.
安全充电：设计师通过控制集成电路的温度降低多余的热量和热调节环路，优化了散热性能。
By charging at a high current until the temperature reaches a certain point, and then switching to a lower current until the charge is complete, we can get around this limitation.
由收费在高电流，直到温度达到某一点，然后切换到较低的电流，直到收费，是完整的，我们可以得到解决此限制。
Charging users according to calorimeter temperature control valve is a trick.
按热量表收费的用户使用温控阀更是有诀窍。
The manager consists of charging and discharging channels and the charging process is controlled by MCU. To ensure the safety of charging process, the battery voltage and temperature are monitored.
该电池管理器由充电和放电两个不同回路构成，采用单片机进行充电控制，单片机在充电过程中对电池电压和电池温度进行监控，保证电池的安全充电。
The test results have proved that the compound non-coupling charging structure can reduce the temperature of the working face and the blasting vibration damage on the reserved frozen soil.
试验结果证明，复合不耦合装药结构可以降低工作面温度和减小对周围保留冻土爆破振动的损伤。
We found by the three-electrode experimental cell, deposition of metallic lithium during low-temperature charging is related to electrolyte, charging rate, cut-off voltage and so on.
通过三电极电池研究发现，锂离子电池在低温充电过程中出现的金属锂的沉积与电解液种类、充电倍率和截止电压等因素有关。
Battery charger used three segment type charging mode and with temperature compensation function, widely apply in generator group started battery, solar cells etc.
蓄电池充电器采用三段式充电模式并具温度补偿功能，广泛应用于发电机组启动电池、太阳能电池等；
Upon excessive internal temperature or reversed battery connection or unexpected short-circuit, the charger automatically turns off the output and stops charging.
当充电机内部温度过高或电池反接以及出现意外短路时，自动关闭输出，停止充电。
MJ-2003A had good properties of acid-resistant, charging at high temperature and charging at high and low temperature, and its technical performance was excellent.
该胶具有良好的耐酸性能、高温充电和高低温充电性能，且工艺性能优异；
The groupware has good self-checking capability, and can complete degassing and charging in different ambient temperature without effecting work-performance of the missile.
该组件系统具有良好的自检功能，能够在不同环境温度下完成对导弹的除气加注功能。
In this paper, the demand of Ni-MH battery charging management is discussed, and thus a management method based on battery voltage, battery temperature, and charging time is put forward.
分析了镍氢电池充电管理系统的设计需求，提出了一种采用电压、温度和时间进行综合控制的充电管理方案。
When the pellets are reduced in high-temperature vacuum, the charging barrel with holes is beneficial to quickly dispersing steam of magnesium, calcium and strontium and shortening the reaction time.
带 有孔洞的料筒有利于料球在高温真空还原时，镁、钙、锶蒸气的快速扩散，缩短了反应时间。
In view of the features of injection moulding machine, fuzzy control and monitoring system was devised and a fuzzy decoupling algorithm was adopted to control the temperature in the charging barrel.
针对注塑机的特点，设计了模糊控制与监测系统，并采用一种模糊解耦算法进行料筒温度控制。
The high temperature and quick rolling technology was applied based on the hot delivery and hot charging process combining with regenerative reheating technique in Shaoguan Iron and Steel co.
介绍了韶关钢铁股份有限公司三轧厂将连铸坯热送热装技术与蓄热式加热炉加热技术有机地结合，采用高温快轧工艺，不仅使企业实现了节能降耗，而且提高了生产率和产品质量。
In a single paragraph, coal gas after charging high temperature and rapid thermal decomposition in abruptly, coal in the volatile rapid exhalation, can make cinderblocks blowout shattered;
在单段煤气炉中，煤入炉后骤然遇高温而迅速热分解，煤中的挥发分急速析出，会使煤块爆裂粉碎；
1 the switch must be turned off when charging, the shell is equipped with temperature rise is normal.
充电时必须关闭开关，外壳备有温升属正常现像。
Therefore, it is suggested that the majority of consumers in the charging process must pay attention to avoid high temperature and excessive charging.
因此，建议广大消费者在充电过程中一定要注意避免高温和过度充电。
Therefore, it is suggested that the majority of consumers in the charging process must pay attention to avoid high temperature and excessive charging.
因此，建议广大消费者在充电过程中一定要注意避免高温和过度充电。
应用推荐