Designed an ambient temperature detection circuit suitable for indirect charge temperature measurement.
设计了适合于装药温度间接测量要求的环境温度测量电路。
The influences of the intake charge temperature, fuel air equivalence ratio, compression ratio, CO2 to combustion and pollution are studied.
分析了进气温度、燃空当量比、压缩比、CO2对燃烧和排放的影响。
We know that influence the main factor of service life of the battery to have the following several points: discharge, charge temperature, charge the voltage at most to pass.
我们知道影响电池使用寿命的主要因素有以下几点：过放电、充电温度、最高充电电压。
In order to study effects of convection and radiation on unstable temperature field of rocket charge with annular clearance in the interior, the charge temperature field was simulated.
为了研究对流和辐射对内含环形空气间隙的某火箭发射装药的非稳态温度场的影响，对装药温度场进行了数值模拟。
Back on the boat, you can charge the Reef with a USB cable while uploading dive details like water temperature and depth.
回到船上，你可以一边在电脑上下载潜水一些注意事项，比如潜水的水温和深度，一边用根数据线将这款“礁石”手表与电脑相连，给手表充电。
Simple services, like stock quote services or temperature services with no quality of service guarantee and available at no charge.
简单服务，类似股票行情服务或温度服务等没有服务质量担保、且可以免费获得的服务。
We started with an excellent high-frequency power supply design, and added "smarts" so you can alter the charge voltages depending on the chemistry of your batteries and their temperature.
我们开始了一个极佳的高频电源供应器设计，并增加了“智慧”，这样你可以改变充电电压在您的电池和化学取决于其温度。
This may be done in a reciprocating screw machine where one charge at a time is brought to curing temperature.
这可能是在做往复螺杆机，其中一名主管在一个时间是带来的固化温度。
Based on environment temperature and battery terminal voltage, the controller can also adopt proper charge mode, such as overcharge and floating charge, to extend the battery life.
控制器还根据环境温度和蓄电池端电压选择适当的充电方式，蓄电池将充满时，控制器会自动调整成为过充和浮充方式，从而能有效地延长蓄电池的寿命。
The net charge of emp with certain PH, temperature and protein concentration is proportional to the DH.
净电荷数在pH、温度和蛋白质浓度一定的条件下，随水解度的增加成正比例关系增大。
MCU control charge and discharge by the state, achieve the best charge state. Automatic detection and tracking external battery temperature, built-in temperature compensation.
单片机控制充电和放电状态，达到最佳的充电状态。自动检测和跟踪外部电池温度，内置温度补偿。
Simulation and measurement result indicate that magnetic field influence the beam current of MIG, and the beam current of the MIG depends on the cathode temperature and space charge effect.
模拟和测量结果显示磁场对MIG的束流有影响，MIG的束流也与阴极温度和空间电荷效应有关系。
The results showed that reaction temperature, catalyst type, feedstock properties and catalyst charge in the secondary reaction zone all have influence on MIP catalytic cracking process.
结果表明：反应温度、催化剂类型、原料油性质、第二反应区催化剂藏量等是影响MIP催化裂化技术的主要因素；
The factors affecting the synthesis of PEE antistatic agent were studied, including PEG molecular weight, charge ratio, temperature, time and vacuum degree.
对影响PEE合成的主要因素，如PEG相对分子质量、原料配比、温度、时间及真空度等进行了研究。
The robustness of system, the precise of temperature and pressure are observably improved as charge coupled, increase the amplification constant, decrease measure scope, etc.
采用电荷耦合、提高放大倍数、降低量程等误差修正技术，提高了系统抗干扰能力和温度、压力测量数据的精度；
The make up and basic principles of a flame temperature measuring system using colored array CCD (charge coupled device) are described along with an analysis of its major error sources.
介绍了利用彩色面阵CCD进行火焰投影温度测量的系统结构和基本原理，并分析其主要的误差来源。
Experimental results indicate that the micro-hardness of electroformed nickel shaped charge liner decreases obviously as the annealing temperature rising and the grains show equiaxed in shape.
试验结果表明，随着退火温度的升高电铸镍药型罩的显微硬度明显降低，内部晶粒呈现等轴晶形态。
We control the depth of discharge and charge saturation accurately by temperature compensation. It makes the lifetime of the battery longer.
辅于温度智能补偿精准控制蓄电池的放电深度及充电饱和度，保证蓄电池工作于最佳状态。
In order to build the DPF pressure drop model based on air intake flow, DPF bed temperature, soot and fuel charge, the paper has carried out a series of tests, collected a mass of data.
为了建立基于进气流量、DPF床温、碳烟以及喷油量的DPF压降模型，论文进行了一系列的试验，采集了大量数据。
In order to keep the normal bath temperature and slag forming condition, the charge of pig iron should not be exceeded 10 % on middle and small converter.
中小型转炉内生铁块的加入量不应超过10 %，使转炉吹炼过程中保持正常的熔池升温和成渣状况。
Flow batteries can also remain idle for long periods of time without losing charge and are not affected by temperature extremes.
流电池也可以保持空闲很长一段时间，而不会失去电荷，并不会受到极端温度。
The effects of the three main process variables(time, temperature and thiourea dioxide charge)on thiourea dioxide(TD)bleaching of pulp from recycled old newspaper were studied.
就二氧化硫脲（TD）漂白中的三个主要过程参数（时间、温度和TD用量）对回收旧报纸浆漂白的影响进行了研究。
The effects of temperature on the substrate consumption, cell growth, pyruvate biosynthesis and level of energy charge and oxidation-reduction state have been investigated.
考察了不同发酵温度下基质消耗、细胞生长、丙酮酸合成及能荷水平和氧化-还原度等方面的差异。
The experimental results show that mineral surface is possessed of negative or positive charge at dynamic temperature condition.
在动态温度条件下矿物表面带有正负电荷。
Heat charge simulation method which was derived from comparison of electric and thermal field was presented to calculate the static temperature field of underground cables.
根据电场和温度场的相似性，提出了用于计算地下电缆群稳态温度场的模拟热荷法。
The influence of ambient temperature on charge efficiency of alkaline storage battery was notable, but some measures may be taken to elevate this influence efficiency.
环境温度对碱性蓄电池充电接受能力的影响是明显的，可以采取措施进行一定程度的调整。
The experiment results showed that the amount of activator was the primary affecting factor, the next was in order of NaOH charge, bleaching temperature and time.
结果表明：活化剂用量是最主要影响因素，其次是用碱量、温度和漂白时间。
The design and application of battery charge controllers with temperature compensation for use in photovoltaic systems are studied.
对具有温度补偿功能的光伏系统充电控制器的设计与应用进行研究。
It can reduce the temperature coefficient of PSS charge and make the application of PSS charge in gun more practically.
可以减小装药的温度系数，使PSS装药在火炮中的应用更具有现实性。
It can reduce the temperature coefficient of PSS charge and make the application of PSS charge in gun more practically.
可以减小装药的温度系数，使PSS装药在火炮中的应用更具有现实性。
应用推荐