These types of detectors are often called three-dimensional (3-d) detectors. A widely spaced hole-array is desirable in that it allows lateral depletion and charge collection.
这些探测器通常被称为三维(3 - D)探测器，基于一种广泛间距孔阵列用于横向枯竭和能量采集。
These types of detectors are often called three-dimensional (3-d) detectors.A widely spaced hole-array is desirable in that it allows lateral depletion and charge collection.
这些探测器通常被称为三维(3 - D)探测器，基于一种广泛间距孔阵列用于横向枯竭和能量采集。
Basically, a DNA strand is pushed through a 2nm hole on a silicon chip and, as it moves through, that chip is able to use an electrical charge to read the strand's coding sequence.
DNA链被拉进硅基芯片上的直径2nm的孔，随着它穿过小孔，该芯片可以通过电荷读取到链上的编码序列。
By improving parameters of the blasting hole, the charge, charging structure and the priming order etc, the smooth blasting is formed.
通过改进爆破的孔网参数、装药量与装药结构、起爆顺序等，从而形成了光面爆破。
The mechanic affection on the blast hole walls is simply analysed and cracking propagation caused by shaped charge is explained in this paper.
简单分析了聚能爆破装药在孔内爆破的力学效应，阐明了聚能爆破对岩石定向破裂的控制机理。
Hole - Similar to a positive charge, this is caused by the absence of a valence electron.
空穴-和正电荷类似，是由缺少价电子引起的。
To investigate the parameters of parallel cut blast without empty holes, an advanced numerical method is used to study the explosion effect of charge in hole perpendicular to a free surface.
为了考查无空孔直眼掏槽爆破参数，采用数值模拟方法研究单自由面垂直炮孔的爆炸作用问题。
Resistance lines, hole charge, moisture content of interlayer are the main factors to effect the slope stability in blasting of layered rock masses by analyzing site blasting.
对现场爆破情况分析知，顺层台阶爆破的抵抗线、炮孔装药量、软弱夹层含水率是影响边坡稳定性的主要因素。
Thus, the relationships of oxide charge generation, including electron trapping and hole trapping effects, with different stress voltages and channel lengths are analyzed.
然后对不同应力电压、不同沟道长度下氧化层陷阱电荷（包括空穴和电子陷阱俘获）的产生做了进一步的分析。
The relationship between the pre-splitting, vibration reduction, millisecond blasting and the maximum single detonating charge in open deep-hole large stage is introduced.
主要介绍露天深孔大梯段预裂爆破、减震爆破、微差爆破、最大一次装药量的控制措施和关系。
Pre-splitting blasting experiments were carried out to obtain normal pre-splitting blasting parameters such as hole diameter, hole space, gun- powder charge line density, and uncoupling factor.
通过大量的预裂爆破试验，得出了适用于该边坡的炮孔直径、炮孔间距、线装药密度、不耦合系数等一系列常规预裂爆破参数。
The improvement of tandem device performance is attributed to the efficient electron and hole injection from charge generation layer to two adjacent emission units.
叠层发光器件性能的提高与中间电荷产生层向上下两个发光单元有效的电子、空穴注入有关。
V-shaped notch blasting is that cutting slots with certain depth along axis -direction of the hole is determined according to the blast-crazing, and then load uncoupled charge and detonation.
形刻槽爆破是指在炮孔孔壁上按爆破开裂方向，切出一定深度的轴向对称V形槽，采用不耦合装药结构进行的一种断裂控制爆破。
The parameters and layout of linear shaped charge, and the hole-pattern parameters, charging structure and priming method for long-hole blasting were discussed.
讨论了线形聚能装药的参数、设置方法以及深孔爆破的布孔参数、装药结构、起爆方法。
In the paper, the charge weight is discussed using the energy method, and the charge weight of the first hole-springing explosion is determined for deep-hole springing blasting.
利用能量方法，对初次爆扩用药量的问题进行了探讨，确定了深孔药壶爆破初次爆扩的用药量。
Gas dead stress is mainly reason for crack occurrence when greater decoupling charge factor is adopted for blasting hole.
大不偶合系数的炮孔装药爆后。气体静压是产生裂纹的主要原因。
Take the big hole perforating charge as example, studied are the parameters of liner by tests.
以大孔径射孔弹为例，用试验的方法对药型罩的各个参数做了初步研究。
Furthermore, the paper also describes the charge shapes, the differential time and the guide hole stemming.
对药包形态、微差时间、导硐堵塞也作了描述。
The results indicate that the decay coefficient of the peak value of blast wave with the distance will be reduced as the hole depth (charge length) is increased.
计算表明，炮孔深度(装药长度)增大，爆炸应力波峰值随距离的衰减指数减小。
New provisions repair the wall by filling the hole left by charge-offs and anticipating the scale of hits to come.
银行会填补资产冲销带来的漏洞，估计未来的损失规模，用新准备金再次修复这堵墙。
New provisions repair the wall by filling the hole left by charge-offs and anticipating the scale of hits to come.
银行会填补资产冲销带来的漏洞，估计未来的损失规模，用新准备金再次修复这堵墙。
应用推荐