This model has 4 characteristic points and 3 characteristic line sections.
模型具有4个特征点和3个特征线段。
And the slopes of characteristic line sections represent planarization of film surface.
特征线段的斜率反映了薄膜表面的平面度。
The new curve has 4 characteristic points and 3 characteristic line sections, which can be used to make process analysis.
新曲线具有4个特征点和3个特征线段，利用这些特征进行工艺分析。
The time history of water hammer in pipeline in the condition of unit emergency load dump is calculated by characteristic line method.
在水电站机组丢弃负荷情况下，利用特征线法计算管道内的水击荷载时间历程。
The characteristic line method meets the static equilibrium equations and yield conditions, which gives the lower limit of the solutions.
本方法满足静力平衡方程和屈服条件，属于极限分析理论的下限解。
The characteristic line method is used to simulate the characteristics of the water conveyance system of the ship lock in the Three-Gorges Project.
利用等时段的特征线法数值模拟三峡永久船闸输水系统不补水工况下的输水特性，得出了输水管道沿程各节点水头及流量的变化规律。
The ways of founding the characteristic line equation for adaptive incremental bending is feasible to realize numerical control of the bending process.
自适应增量弯曲特征线方程的建立思想，对于实现零件数控弯曲成形过程是可行的。
Indirect method can adjust the characteristic line equation in time based on the status of practical process, thus the forming precision can be improved.
间接法能够根据板料实际加工状态及时调整特征方程，提高了成形精度。
The characteristic line equation of adaptive bending is established and applied to the numerical control of the bending forming of ribbed structural parts.
阐述了自适应增量弯曲的基本原理与试验数据处理方法，建立了自适应增量弯曲特征线方程，并将其应用到壁板类带筋结构件的数控弯曲成形过程中。
On the basis of classic theory and formula, the flier plate action rule was first studied with the method of the numerical difference in characteristic line.
在经典理论及公式的基础上利用特征线数值插分方法对飞板运动规律进行研究。
Numerical method is proposed for general mechanical impact systems by means of characteristic line theory . Simulation results of hydraulic rock drill are provided .
应用特征线方法，提出了一般冲击机械的波动力学数值计算方法，给出了一液压凿岩机械的数值模拟结果。
Besides a comparison of the characteristic line, the normalized mean square root error, the normalized mean error, and the maximum deviation are calculated and discussed.
除了用单行数值比较法外，还计算了重组和数学模型之间的归一化均方根偏差、归一化平均偏差和最大偏差。
The numerical results show that this technique seems to be simpler and more effective than other procedures, such as the finite difference and characteristic line methods…
计算说明，这种方法比差分方法和特征线性方法简单有效，从而有较大的实用意义。
The paper discusses the ultimate loads of foundations calculated with the characteristic line method and the determination of the ultimate bearing capacity of foundations.
理论分析和实验研究表明，使用特征线法计算管道系统时，在大小管连接截面处，应考虑到该处的动量变化，才能准确描述液压管道系统的瞬变过程。
Since a mine pumping system can generally be simplified into a complicated pipe-line system in series, the transient process is simulated by a method of characteristic line.
根据矿井排水系统一般可以简化为串联复杂管路系统的特点，采用特征线法模拟其断电停泵的瞬变过程。
Gas decompression wave velocity during the pipeline fracture process was solved by the three-characteristic line method, and the corresponding computer program was developed.
应用三特征线法求解气体减压波速，并开发了相应的计算程序，分析了起始压力、起始温度、不同气体介质和管径对气体减压波速的影响。
The recognized basic of abstract bionic design was discussed and the process of abstract bionic design and extracting of characteristic line were demonstrated by a case study.
文章讨论了抽象仿生设计的认知基础，对抽象仿生设计的过程及特征线的提取进行了详细地论证，引用实际案例说明了这一过程。
In this paer, by the use of the method of characteristic line of stress wave, a prediction analysis for the sacond impact of an elastic bar impacting on a rigid block is given.
本文采用应力波特征线方法详细分析了刚体撞块撞击固支的弹性长杆的撞击过程。
By using the combined implicit characteristic line method, the calculation of the transient surge pressure in the flow conduit of a drilling well has been resolved in this paper.
本文用混合隐式特征线法求解了井内流道中的瞬态波动压力问题，给出了弹性管和可压缩流体在井内各流道组合的压力波波动方程和定解条件。
The numerical results show that this technique seems to be simpler and more effective than other procedures, such as the finite difference and characteristic line methods. Therefore, it…
计算说明，这种方法比差分方法和特征线性方法简单有效，从而有较大的实用意义。
Although smooth, there is a characteristic "break line" of tangency denoting where the circle meets the line.
虽然平滑，但它存在着一个特点，就是圆弧和直线相接的地方会有一个曲率变化上的断裂。
The essential characteristic of line (compared to batch), is that to produce another product or provide another service, the process does not have to be stopped and reset.
流水线的基本特征(与批量生产相比)是在生产或提供另一种产品或服务时，生产过程不必停下来再重新启动。
Based on conformal transform method and point matching method, a method to calculate the coaxal line characteristic resistance is presented.
本文将保角变换法与点匹配法结合起来，得到了一种计算同轴线特性阻抗的方法。
This paper introduced the characteristic of aircraft pipeline refueling system and set up a one waiting line multiple-server queuing model.
介绍了飞机管道加油系统的特点，应用排队论建立了加油过程的单队多列排队模型。
The paper introduces the Hsien rice restoring line Chen R92-225 breeding by allomixis and irradiation methods, the characteristic and application of Hsien rice restoring line Chen R92-225.
本文介绍了籼型恢复系郴R92-225的杂交和辐射选育过程、特征特性及配制杂交组合应用于生产的情况。
This paper introduces the device, characteristic of operation and application for M228 grinder of measure on line for internal grinder.
本文介绍内圆磨床常用的在线测量装置、使用特点及在M228内园磨床上的应用。
This paper is the second part, which presents the characteristic of reflection and refraction coefficient spectrum at line boundary.
本文是第二部分，主要探讨了两类母线的接线情况下，线路边界的折、反射系数的频谱特征。
It is concluded that surface roughness can better reflect the characteristic of the sample's surface than line roughness.
并得出了面粗糙度比线粗糙度更能体现试件表面形貌特征的结论。
According to fault characteristic of the electro hydraulic servo system, this paper has proposed a fault tolerant project that USES the fuzzy neural network as an identifier on-line.
根据电液伺服系统的故障特点，本文提出了采用模糊神经网络做在线辨识器的容错控制方案。
According to fault characteristic of the electro hydraulic servo system, this paper has proposed a fault tolerant project that USES the fuzzy neural network as an identifier on-line.
根据电液伺服系统的故障特点，本文提出了采用模糊神经网络做在线辨识器的容错控制方案。
应用推荐