These results have reference value for design of CFB boilers.
研究结果对CFB锅炉的设计具有参考价值。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
经循环流化床数值模拟的检验证明,新模型的计算结果与实验数据吻合,从而在稠密气固两相流动的数值模拟中具有相当的优越性。
Expatiate water-cycling mode for large CFB hot-water boiler, water flow path and heat-exchanger surface structural design.
阐述了大型循环流化床热水锅炉的水循环方式、水流程及受热面结构设计布置。
Clean combustion technology of CFB is ideal alternative technology for air pollution control of industrial coal-fired boiler.
循环流化床洁净燃烧技术,是燃煤工业锅炉大气污染控制的理想替代技术。
There are greater differences for gas and dust characters between the circulating fluidized-bed(CFB) and normal boiler.
循环流化床锅炉的烟气和烟尘性质与常规煤粉炉相比有较大差异。
Circulation fluid-bed boiler (CFB) is characteristic of high efficiency and cleanness.
循环流化床锅炉(CFB)具有高效、洁净的特性。
The practical running results show that this system is designed reasonably and satisfies the requirement of the multi-variables continuous process control in the CFB-FGD.
实际的生产运行证明,该系统设计合理,运行稳定可靠,基本实现了干法脱硫过程中的多变量连续过程控制要求。
The abrasion of metallic parts and fire-resistant materials for circulating fluidized bed (CFB) boilers is one of the main causes of operation failures.
循环流化床锅炉中金属部件及耐火材料的磨损是造成其运行事故的主要原因之一。
In the paper a group ACK mechanism based on EDCF-CFB is put forward, and its efficiency is analyzed theoretically.
本文在EDCF - CFB的基础上提出了一种群ack确认机制并从理论上进行了分析。
Because of over consumption of oil and inaccurate coal-feeding time in the start-up process of the circulating fluidized bed(CFB) boiler, resource waste and even the start-up failure occur.
循环流化床锅炉在启动过程中普遍存在投油量过大,开始投煤时间把握不准等现象,导致启动过程中资源过度浪费,甚至会出现启动失败的情况。
This article summarizes the technology of manufacture on wind-water combined ash cooler of CFB boiler and analyses the difficulties in manufacturing.
主要对循环流化床锅炉的风、水联合冷渣器的制造技术进行归纳和总结,对制造中的难点进行分析与说明。
In the study of heat transfer in CFB, most researchers focus on the heat transfer between the bed and the wall, few people attach importance to the gas-solid interfacial heat transfer.
在循环流化床内的传热研究方面,大多数研究者从事的是床层与换热表面之间的传热研究,而忽略了床中重要的气固两相间的传热。
The results show that the principle of re-circulating rate does not change compared to conventional CFB.
结果表明:在双级料腿循环流化床中,与常规的循环流化床相比,循环流率的规律没有发生变化。
These calculated results are in agreement with experiment ones. It shows that these models and algorithm are feasible and can be used to study the dense two-phase flow in a CFB efficiently.
计算结果与前人实验结果相符并表明,采用该模型及其算法模拟循环流化床内稠密气固两相流动是可行的。
These models are used to numerically study the two-phase flow in a Circulating Fluidized Bed (CFB), and detailed results regarding the dense two-phase flow characteristic in a CFB are obtained.
用此模型对循环流化床的两相流动进行数值模拟,得到了较详细的床内流动特性。
This paper analyzes the abrasions on major metallic parts and fire-resistant materials for CFB boilers, and suggests the use of different anti-abrasion measures according to different situations.
为此,介绍了循环流化床锅炉主要金属部件及耐火材料的磨损及其产生磨损的原因,提出对不同的磨损位置及耐火材料,应采取不同的防磨措施。
The paper pointed out the advantages and disadvantages of different anti-abrasion methods applied for CFB boilers and discussed the necessity to adopt the integrated anti-abrasion method.
本文分析了当前用于CFB锅炉的各种单一防磨技术优缺点,论述了采取综合防磨技术的必要性。
This paper introduces the structure, performance, key point of design and operation results of external heat exchanger in CFB boiler.
本文介绍循环流化床锅炉用外置式换热器的结构、性能、设计要点以及实际运行情况。
The ultrastructure of central fibrous body (CFB) was observed in the 5 rabbits with electron microscope.
用透射电镜观察了5例兔心中心纤维体(CFB)中央部的超微结构。
Compared with hot cyclone-type CFB designs, the IR-CFB has significantly lower furnace exit gas velocity and requires significantly less building volume.
与热旋风型CFB设计相比,IR - CFB的炉膛出口烟气速度极大地降低,同时所要求的建造体积也极大的减小了。
The following requirements are added as per the features of CFB boiler besides the automatic or interlock protection device of normal pulverized coal boiler.
除常规煤粉锅炉的自动或联锁保护装置外,根据循环流化床锅炉的特点,增加以下要求。
The test shows that size distribution of feeding coal, volatile content and its release as well as the total air rate and primary air ratio will influence the post combustion in CFB boiler.
测试结果表明,影响后燃现象的主要因素是给煤的粒度分布、煤挥发分含量及挥发分析出规律,同时与炉膛内总风量、一二次风量的配比有关。
The combustion and heat transfer in CFB boiler are related with the bed material, while the bed material is formed during the coal combustion, fragment and attrition processes.
循环流化床锅炉炉内的燃烧及传热与炉内床料的状态密切相关,而炉内床料主要是由燃煤含有的矿物组分经过燃烧、爆裂和磨耗过程形成的。
For the IR-CFB, compact and simple equals economical.
对于IR - CFB来说,紧凑和简单就意味着经济。
One of the main advantages of CFB technology is that it allows the owner to specify a wide variety of fuels to optimize the profitability of the facility.
CFB技术的一个主要优势是业主可以从多种燃料中进行选择以优化设备的效益。
It is valuable for CFB desulfurization reactor design optimization to study the gas-solid flow field characteristic in CFB riser.
研究流化床提升管内气固流场分布情况对设计和优化循环流化床脱硫器有重要意义。
Bed clinkering threaten startup of CFB boiler.
结焦威胁着CFB锅炉的启动。
This paper analyses the effect of coal sieving characteristics on the CFB boiler running.
分析了燃煤筛分特性对循环流化床锅炉运行的影响。
This paper analyzes the causes of these failures and puts forward the equipment improvement measures and operation adjustment measures of CFB boilers.
文章分析了产生这些故障的原因,并提出了对循环流化床设备进行整改和运行调整的措施。
The igniting characteristics of large scale circulating fluidized bed (CFB) boiler are analyzed.
对大型循环流化床(CFB)锅炉点火特性进行了研究分析。
应用推荐