Therefore, modern ceramic on ceramic painting landscapes in the history occupies an important place in history.
因此，近代瓷上山水画在陶瓷绘画史上占有重要的历史地位。
The ceramic Market at the gap space on a historic ceramic street of Osaka, Japan.
日本大阪历史悠久的陶瓷品市场在夹缝中重现。
Ceramic color composition and method of forming ceramic color film on glass plate using same.
陶瓷色料组成和运用该色料的玻璃板上形成彩色陶瓷膜的方法。
The material data fill the gap of the ceramic history between Song and Jin Dynasty, moreover, they shed light on the research about the ceramic history of China.
这批实物资料填补了宋金之际陶瓷史的一项空白，在中国陶瓷史的研究中具有重要意义。
The two chips are mounted on a ceramic substrate, and then hermetically sealed in a ceramic surface mount package.
这两款芯片安装在陶瓷基板，然后密封在一个密封的陶瓷表面贴装封装。
Ceramic tile: use a small hammer knock on to see if free drum sound, groove seam is full, ceramic tile stick whether level off.
瓷砖：用小锤子敲敲看是否有空鼓的声音，沟缝是否饱满，瓷砖贴的是否平整。
Influence of ceramic slip properties, plaster mould properties, operating conditions etc. on absorption slip rate of ceramic slip are investigated. Experiments prove that the factors are complicated.
本文研究了陶瓷泥浆性能、石膏模性能和外界条件等因素对陶瓷泥浆吸浆速度的影响。实验表明影响泥浆吸浆速度的因素是复杂的，多方面的。
Effect of struts on mechanical properties of SiC ceramic foams was investigated through analyzing struts dimension and structure of 4 kinds of ceramic foams prepared by different process.
通过分析4种不同处理工艺制备的碳化硅泡沫陶瓷孔筋尺寸和结构，探讨其对泡沫陶瓷力学性能的影响。
The influence of ceramic particle proportion and treating agent on the mechanical property of the PET fiber blended with ceramic particle was studied.
将陶瓷粒子与PET共混纺丝，研究了不同处理剂及不同陶瓷粒子含量对PET纤维各项力学性能的影响。
At present, all methods exist in some problems, no matter the advanced clinical operate or spraying ceramic on dental implant neck and ceramic abutment etc.
目前无论是从改进临床技术操作还是喷涂陶瓷于种植体颈部以及陶瓷基桩等方法来改善前牙区灰色，都存在一定的问题。
Ceramic: Aluminium oxide, ceramic tile material, magnesium oxide, talcum and so on.
陶瓷：氧化铝、瓷砖材料、氧化镁、滑石等。
It was introduced how to change single layer ceramic disc components with leads into chip components on the basis of single layer ceramic discs.
介绍了在单层陶瓷圆片的基础上实现单层陶瓷圆片带引线元件的片式化。
In view of the poor solderability of metallic film formed on ceramic surface, a secondary metallization of ceramic surface by nickel plating was advanced.
为提高陶瓷金属化层的焊接性能，提出了一种陶瓷二次金属化镀镍工艺。
Effects of pore on the contacting fatigue life of ceramic balls were analyzed by the tests of fatigue life. A method for increasing the fatigue life of ceramic balls is suggested in this paper.
本文通过陶瓷球接触疲劳寿命试验，分析了陶瓷球孔隙对陶瓷球接触疲劳寿命的影响，提出了提高陶瓷球接触疲劳寿命的方法。
The influences of the solid content and coagulant in ceramic slurry on the properties of ceramic green body are investigated.
研究了陶瓷浆料的固相含量，原位凝固剂等对材料性能的影响。
These conclusions are valuable to design hot gas ceramic filter and study on the performance of multi row and multi level ceramic filter candles.
这些结果对合理设计高温陶瓷过滤器及深入研究多层多排陶瓷滤管的过滤性能有重要价值。
The ceramic product shape has the close relation with its function, structure, material, color, skin texture and so on, they constitute the overall attribute of the ceramic product.
陶瓷产品形态与其功能、结构、材料、色彩、肌理等有着密切的关系，它们共同构成了陶瓷产品的整体属性。
Application of ceramic fiber for ceramic kiln has been introduced. Some opinions have been given on the problems in application, so this paper can be referred to in practical usage.
介绍了陶瓷纤维在陶瓷窑炉上的应用，并针对应用中存在的一些问题提出了看法，为陶瓷纤维的实际应用提供参考。
Objective This research is to choose the best bonding way of ceramic crown by investigating the effects of different bonding agents and interfacial treatment on the occlusal strength of ceramic crown.
目的研究不同粘接剂与不同的粘接界面处理方法对陶瓷全冠咬合强度的影响，选择最佳粘接方式。
Such a multilayer unit for multilayer ceramic electronic components is produced by printing a conductive paste on a ceramic green sheet in a certain pattern, thereby forming an electrode layer.
用于多层陶瓷电子元件的多层单元是通过按照一定图案将导电糊印刷在陶瓷生片上形成电极层来生产的。
Durable nichrome wire wound around a ceramic core is embedded in ceramic material and then fired in a kiln on site.
耐用的镍铬合金线缠绕在陶瓷芯上，并镶嵌在陶瓷材料上后在烧窑中进行加热。
The experimental procedures of the post-treatment were investigated, and its effects on the metallization of PZT ceramic surface and the properties of the PZT ceramic components were discussed too.
本文报导了这种后处理的实施过程、控制条件及其结果，并讨论了后处理对于PZT陶瓷表面金属化及对PZT陶瓷元器件的电学性能的影响。
I know, the ceramic material may divide into four types on the whole: Traditional process ceramics, structure ceramics, functional ceramic and biological ceramics.
就我所知，陶瓷材料大体上可以分为四个类型：传统工艺陶瓷，结构陶瓷，功能陶瓷和生物陶瓷。
Objective: To analysis the effect of the thickness of dentin porcelain on the color of the nano-ceramic and the traditional ceramic.
目的：分析不同厚度的体瓷对纳米陶瓷和普通陶瓷颜色的影响，为纳米陶瓷的临床应用以及瓷层厚度的控制提供实验依据。
On the basis of absorbing imported air-jet spinning ceramic noxxle, the design and manufacture process of domestic TJS-1 air-jet spinning ceramic noxxle is described in this paper.
本文论述了在消化吸收进口喷气纺纱喷嘴的基础上，进行国产化TJS—1型喷气纺纱喷嘴的设计与研制过程。
Main products: ceramic crafts, ceramic vases, ornaments and so on.
主要生产：陶瓷工艺品，陶瓷花瓶，摆件等。
But finished his teeth root canal therapy usually will gradually change color, front teeth may affect the appearance, if the patient care, can be done on metal ceramic tooth or all-ceramic crowns.
但做完根管治疗的牙齿通常会慢慢变色，在前牙可能会影响美观，若病人在意的话，可做上金属瓷牙或全瓷冠。
Widely used in ceramic valve, fittings for sand mill, ceramic sealing part, dewatering plate, resistant pipe, mining equipment and so on.
广泛应用于陶瓷阀门、砂磨机配件、陶瓷密封件、脱水板、耐磨管件、矿用设备等领域。
Till now there have been about 10 type structures for wave-guide CO_2 lasers, and many kinds of wave-guide material including ceramic material, ceramic metal, all-metal and hard glass, and so on.
目前，波导CO_2激光器的结构形式近十种，而波导材料也有陶瓷、陶瓷-金属、全金属及硬质玻璃等。
OBJECTIVE: To review the research progress on ceramic crown and related ceramic splicing agent.
目的：总结全瓷冠及其相关陶瓷粘接剂的研究进展。
应用推荐