Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide, baddeleyite powder, and granular polystyrol.
以锆酸锶为基体,采用二氧化锆、巴德雷石粉和粒状聚苯乙烯为原料,制备了多孔陶瓷材料。
BAE systems Inc. intends to acquire advanced Ceramics Research Inc., a provider of small unmanned aircraft systems (UAS) and advanced ceramic materials used in flight systems.
BAE系统公司打算兼并先进陶瓷研究公司。先进陶瓷研究公司是一家小型无人机系统(uas)和用于飞行系统的先进陶瓷材料的供应商。
It is a new technology to sinter ceramic materials rapidly by means of the high temperature and high heat transfer rate of plasma.
利用等离子体的高温和高传热率快速烧结陶瓷材料是一项新技术。
Type MYG Varistors are made of semiconductor ceramic materials composed mainly of zinc oxides. They have non-linear resistance that changes as a function of applied voltage.
型压敏电阻器是以氧化锌为主要原料制造的半导体陶瓷元件,其电阻值随施加电压的变化而呈非线性变化。
Professional Zisha Craftsman will tell you how to distinguish the Yixing purple clay from other ceramic materials and show you the procedure of the clay refinement in Ming and Qing Dynasty.
邀请紫砂文化专家和工艺师讲解陶土和紫砂矿料的识别、明清紫砂泥的制作过程。
Surface thermocouple used in ceramic materials has been developed.
针对陶瓷材料的特点,研制了一种双薄膜式表面热电偶。
Toughening technology is an important topic for brittle ceramic materials.
增韧技术对于脆性陶瓷材料来说是一个重要的课题。
Laser processing ceramic materials is a new application of laser technology.
陶瓷材料的激光加工是激光技术应用的新领域。
The critical temperature difference of nanocompsite ceramic materials was researched.
研究了纳米复合陶瓷材料的抗热震临界温差;
A double - membranous Surface thermocouple used in ceramic materials has been developed.
针对陶瓷材料的特点,研制了一种双薄膜式表面热电偶。
They can also improve the behavior and increase the application reliability of ceramic materials.
并可改善陶瓷材料的性能,提高其使用可靠性。
Quality ceramic materials become fewer, vitrified tiles have low whiteness, therefore need new opacifier.
优质的陶瓷原料越来越少,玻化砖的白度较低,因此需寻找新的乳浊剂。
But up to now there were only four dental zirconia ceramic materials in market with relatively high prices.
但上市销售的牙科氧化锆陶瓷材料仅有四种,且价格比较昂贵。
Finally, some important applications for anisotropy of similar electronic ceramic materials are pointed out.
最后,指出了类似的几种电子陶瓷材料的各向异性的一些重要用途。
The failure problems of porous ceramic materials were analyzed using the lattice model and statistical methods.
应用格模型和统计学方法分析了多孔陶瓷材料的失效问题。
But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.
但是,陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。
The mechanism and process of ceramic materials' surface metallization by molten salt reactions have been investigated.
本文系统地研究了利用融盐热析出反应进行陶瓷材料表面改性及制备复合材料的机理和工艺。
This article summarizes the investigation of HAP biomaterial from the synthesizing of HAP powder and ceramic materials.
本文主要从HAP粉体材料及陶瓷材料的合成方面对HAP生物材料的研究进行综述。
These functional devices can be realized by using electro-optical effect of transparent ferroelectric ceramic materials.
这些功能元件可采用透明铁电陶瓷材料的电光效应来实现。
The main disadvantages of artificial bone made of ceramic materials are of high brittleness and low resistance to fatigue.
现有人工骨陶瓷材料存在的主要缺点是脆性大,抗疲劳性差。
For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.
对脆性陶瓷材料来说,抗弯强度即为横向弯曲试验中样品断裂时的应力。
Improving the brittleness of ceramic materials is one of the problems necessary to be solved by ceramists for a long period.
改善陶瓷材料的脆性是陶瓷学家们所长期关注的问题。
A sensor equation and an actuator equation were developed using the constitutive relations of piezoelectric ceramic materials.
基于压电材料的本构关系,建立了传感方程和作动方程。
The improved experimentation by using electronic balance to measure the density and the pore ratio of ceramic materials was designed.
提出了利用电子天平测量陶瓷材料密度及其气孔率的方法。
The potential forming methods for these advanced ceramic materials are equally as varied, and each has its advantages and disadvantages.
高级陶瓷原材料可采用的成形方法多种多样,且每一种都有其各自的优缺点。
The microcracks caused by the transforming inclusions associate closely with the mechanism of fracture and toughness in ceramic materials.
由夹杂转变引起的微开裂与陶瓷材料的断裂和增韧机制密切相关。
How to make a comprehensive evaluation of the machinability for processible ceramic materials is put forward according to fuzzy mathematics.
根据模糊数学理论提出一种可加工陶瓷材料可加工性的综合评判方法。
The whetting part is made of super durable special ceramic materials, that help to shape the dull blade quickly and improve the knife's quality.
磨刀器部分采用超耐磨的特殊陶瓷材料,从而将较钝的刀锋快速修正成型以及提高刀刃的质量。
Typical experimental results for metals, polymers and ceramic materials are given and a good agreement with other investigater's results is shown.
给出金属、高聚物和硅酸盐等材料典型的实验结果,它们与其他一些研究者的结果十分一致。
Typical experimental results for metals, polymers and ceramic materials are given and a good agreement with other investigater's results is shown.
给出金属、高聚物和硅酸盐等材料典型的实验结果,它们与其他一些研究者的结果十分一致。
应用推荐