Machines use water-cooled devices, and adjustment of water to users ideal casting speed.
该机采用水冷装置，并可调整水量，达到用户理想的浇注速度。
Mass Mage Bane (78) : Cancels enemy's M. Atk and Casting Speed buffs in surrounding area.
团体魔力诅咒(78)：消除附近敌人的魔法攻击和施法速度辅助加持。
An operator should be able to operate a number of such machines, at a maximum casting speed.
一个操作工人可以最快的铸造速度操作数台这样的铸片机。
Use: Energizes a Paladin with light, increasing melee attack and spell casting speed by 25% for 20 SEC.
使用：使圣骑士充满圣光之力，增加物理攻击与施法速度25%，持续20秒。
A relationship between the casting speed and the critical size of the non-metallic inclusions is given.
给出了拉速和夹杂临界直径的关系。
The increase of casting speed of continuous caster could make the time shorter for the soaking of slabs.
提高连铸机的拉坯速度可以使铸坯均热所需的时间明显缩短。
The results showed that roll casting speed increase with the decrease of the thickness of the strip, and the …
随着铸轧速度降低、铸轧区增大与铸轧坯厚度减薄，轧制压力峰值增大；
Wizard Servitor (77) : Increases summon's Max MP, MP Regen, Mdef, M. Atk and Casting speed for a period of time.
术士使魔(77)：增加召唤兽的最大mp量，mp回复，魔法防御，魔法攻击及施法速度一段时间。
During ingot casting, control of casting speed is an important measure to improve the surface and inner qualities.
铸锭时控制钢液的注流速度，是改善和提高钢锭表面和内部质量的重要工艺措施。
Therefore, the cooling intensity and the casting speed can be rationally determined by the thickness of strand shell.
因此可根据坯壳厚度合理地确定冷却强度及拉坯速度或由冷却强度预测坯壳厚度。
So, the casting speed plays an efficient role in readjusting the molten steel surface level in pool and rolling force.
铸轧速度是调节熔池液面高度和轧制力的有效手段。
Furthermore, casting speed, superheat and cooling waters effects on steady temperature field are analyzed in this paper.
此外还分析了拉速、过热度和冷却水量等因素对稳态温度场的影响。
The component distribution is more even when drawing extent is smaller and frequency is more rapid at the same casting speed.
拉坯速度相同时，拉幅越小，拉坯频率越快，成分越均匀，合金铜管的成分呈周期性分布。
The results show that the effect factors of EMBr are slab width, casting speed, the shape of submerged entry nozzle and so on.
结果表明，电磁制动的影响因素有板坯宽度、浇注速度、浸入式水口的形状等。
Molten steel level in mould of continuous cast process and casting speed can directly effect temperature of molten steel in mould.
结晶器液位和铸坯拉速可直接影响结晶器内钢液温度。
The results show that the effect factors of EMBr are slab width, casting speed, the shape of submerged entry nozzle (SEN) and so on.
结果表明电磁制动的影响因素有板坯宽度、浇注速度、浸入式水口(SEN)的形状等。
The results show that the waveform is suitable for a broad casting speed range and can meet the need of continuous casting production.
结果表明，这种非正弦振动波形具有较好的拉坯速度适应范围，能够满足连铸生产的要求。
There are a number of factors affecting the casting speed, and the casting speed has to be adjusted according to different situations.
因为影响拉坯速度的因素很多，所以必须根据不同的情况调整拉坯速度。
The sign of stable continuous casting is that the high quality continuous casting strands is stably produced at designed casting speed.
连铸稳定态的标志是以设计拉速能稳定地生产出质量优异的连铸坯。
The links among the pressure, the casting speed and the gap in the casting passage have been analyzed with the hydraulic modelling test.
结合水模型试验分析了浇铸通道内压力、拉坯速度和间隙三者之间的关系。
The research showed that the control result of electromagnetic brake was related to casting speed, mould Angle and magnetic flux density.
研究表明，电磁制动的控制效果与浇铸速度、水口角度和磁通量密度有关。
There are many factors affecting the thermal transfer in the mould, such as casting speed, composition of steel and structure of the mould.
影响结晶器传热的因素很多，如铸坯的拉速、钢的成分以及结晶器的结构等。
Fluid flow in the mould must be optimized in order to improve the internal and surface quality of the slabs while increasing the casting speed.
在拉速提高的条件下，必须优化结晶器内流场以适应稳定生产的需要，防止气孔、拉漏等铸坯缺陷的产生。
The frequency of vortex increases with the augment of the casting speed, and decreases with the augment of the immersion depth and nozzle angle.
漩涡的出现频率随拉速的增加而增加，随水口浸入深度的增加而减小，随水口张角的减小而增大；
The results show that the submerged nozzle ingate angle and depth of its immersion should decrease gradually with the lowering of casting speed.
结果表明，随着拉速的降低，水口的上倾角大小和浸入深度应逐渐减小。
The influence of operating parameter variations including casting speed and temperature, liquid convection in pool, mould length, etc. upon the …
讨论了操作工艺条件（如拉速、浇注温度、钢液流动、结晶器长度等）对结晶器内钢液凝固过程的影响。
The influence of operating parameter variations including casting speed and temperature, liquid convection in pool, mould length, etc. upon the sol…
讨论了操作工艺条件（如拉速、浇注温度、钢液流动、结晶器长度等）对结晶器内钢液凝固过程的影响。
The results showed that with increasing of casting speed, the cellulose membrane has lower roughness, larger crystallinity, and higher degree of orientation.
实验结果表明：随着刮膜速度提高，薄膜平均粗糙度降低、孔径变小、结晶度增加、纵横向取向度增加。
Some measures are suggested to improve operation, optimize technological parameters for solving some strand quality problems caused by increased casting speed.
本文针对连铸提高拉速后，如何改善工艺操作，优化工艺参数，提高或解决因拉速提高后引起的铸坯质量问题。
Some measures are suggested to improve operation, optimize technological parameters for solving some strand quality problems caused by increased casting speed.
本文针对连铸提高拉速后，如何改善工艺操作，优化工艺参数，提高或解决因拉速提高后引起的铸坯质量问题。
应用推荐