I consider myself a logical person, and in hopes of casting some logic on the mystery of deja vu, I set out to decode what exactly it is and why it affects us.
我自认为是一个懂得逻辑思考的人,并希冀可以从“似曾相识”的神秘中找出一些逻辑来。我决心要搞清楚“似曾相识”究竟是什么,以及为什么会对我们产生影响。
The market rout is rapidly wiping out vast amounts of wealth, casting a pall over households and businesses.
股市重挫正迅速将大量财富席卷一空,给家庭和企业蒙上阴影。
Burton challenged Depp, casting him as Edward in Edward Scissorhands (1990) : a twisted fairytale about a boy with hands made out of scissors who yearns to find love.
波顿给了德普一次挑战,在《剪刀手爱德华》(1990年)中出演爱德华一角:这部离奇古怪的童话讲述了有一双剪刀手的男孩不顾一切追寻真爱的故事。
The numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by FDM/FEM integrated system.
对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。
It is pointed out that the rational squeezing casting technology can refine microstructure and improve the component compactness as well as the mechanical properties of alloy.
指出合理的挤压铸造工艺可细化合金显微组织,提高铸件致密性,改善合金力学性能。
Numerical model was established after considering solidification, shake out, clearing getting system and heat treatment to predict the casting deformation during hot working processes.
综合考虑凝固、冷却、打箱、切除浇注系统和热处理影响建立数值模型,准确预测铸件在整个热加工工序中的变形。
The investigation was carried out into the technological properties of microwave silicate sand, molding and core making, casting pouring, used sand reclamation and its properties.
研究了微波水玻璃砂的工艺性能、造型制芯、铸件浇注、旧砂再生及其再生砂性能。
Break out accidents have never occurred and surface quality of slabs has been improved since introduction of this new type of mould flux into continuously casting the rare earth treated steel.
应用新型的稀土处理钢用保护渣没有发生拉漏事故,并提高了铸坯表面质量。
The performance of bentonite and its effect used in casting coating as a suspending agent were studied. Meanwhile, points for attention in its application were pointed out.
研究了有机膨润土的特性及在铸型涂料中作悬浮剂的使用效果,同时指出了其应用注意事项。
The new method of the re-engineering VSR parameters of circle plate casting is figured out based on the modal Analysis technology.
依据振动时效机理,应用模态分析技术,提出一种盘类铸件振动时效工艺参数优化设计的新方法。
The paper explains the characteristics of magnesium alloy die casting parts and points out the demand for magnesium alloy die casting parts in foreign automobile trade.
文中讲述镁合金压铸件特点和国外汽车行业对镁合金压铸件的需求情况。
If the casting is taken out from the moving die, long distance core pulling is needed according to the shape of the casting, so the mechanism of the sliding block which rotates midway was designed.
根据铸件形状特点,若在动模内取出铸件,需长距离抽芯,故设计了滑块中途自行转动机构。
The common structural defect of large-scale rudder horn casting steel and its cause of flaw were analyzed, the smelting and heat treatment technology of casting steel was pointed out as well.
分析了挂舵臂铸钢件常见的组织缺陷及产生原因,提出了铸钢件的冶炼及热处理工艺。
The result from point scanning and surface scanning analysis on both sides and body of sample ZJ1 pointed out that the coin moulds were used for casting bronze coin.
钱范ZJ1的正、反面和胎的点扫描和面扫描分析结果表明,其应为铸造铜钱之范。
Numerical simulation technology has been carried out to analyze the filling process of an aluminum alloy wheel produced by low pressure die casting.
利用数值模拟技术,对低压铸造铝合金车轮的流动、充型过程进行了分析。
Pointing out the main reason of crack formation is that casting blank is not up to standard and the strength of parts is not enough.
指出铸造的毛坯件不合格及零件本身强度不高是产生裂纹的主要原因。
Using the ANSYS finite element analysis software, thermal analysis and thermal stress analysis of side dam in the strip casting process are carried out to explain the cause of side dam cracking.
采用ANSYS有限元分析软件,分析了侧封板在铸轧过程中温度场和热应力场,由此解释侧封板产生裂纹的原因。
Special requirements of shaped blank continuous casting on refine, continuous casting techniques and equipments are pointed out.
指出了异型坯连铸对精炼和连铸工艺及设备的具体要求。
From the investigation by tracing to 122 times of casting the reason for the defects was found out and the effective measures laid down.
经过对122个浇次的跟踪调查,找到了薄板坯连续出现表面凹陷的原因并制定出了防止该缺陷的有效措施。
Based on the high density and the low electrical conductivity of steel, the new compound inductor system technology of steel electromagnetic casting was carried out.
针对钢密度大、电导小的特点,提出并论证了采用复合感应器系统进行钢电磁铸造的新方法。
Failure analysis of parietal cracking in scavenging pump made of die casting aluminium alloy was carried out by means of metallographic examination, SEM analysis and so on.
借助金相显微镜、扫描电镜等分析手段,对压铸铝合金清洗泵腔壁断裂失效的原因进行了分析。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize processing design.
在CAE系统中,对铸件进行流场和温度场的模拟,以便校核和优化工艺设计。
On the Baosteel continuous casting test platform, the mold friction tests with hydraulic oscillation system were carried out.
基于宝钢板坯连铸试验平台,开展了液压振动下的结晶器摩擦力检测实验研究。
Plastic deformation and heat treatment were carried out in the A356 casting sample and the effect of plastic deformation on the structures and properties of A356 was investigated.
对A356铸造试样实施热塑性变形,考察变形工序对其组织和性能的影响规律。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize process…
在CAE系统中,对铸件进行流场和温度场的模拟,以便校核和优化工艺设计。
The current situation of investment casting was analyzed. Three links in which metal wastes were likely to be produced were pointed out, and the measures for prevention and solution were put forward.
分析了当前熔模铸造所面临的形势,指出了生产实践中熔炼车间容易造成金属浪费的三个环节,并提出了相应的预防措施。
Because the mold is formed around a one-piece pattern (which does not have to be pulled out from the mold as in a traditional sand casting process), very intricate parts and undercuts can be made.
由于这种铸型是环绕整块型模形成的(无需像传统的砂型铸造工艺那样拔模),能制作十分复杂的零件和浮雕。
Inertia Vibrating Knock-out Machine is mainly used for casting off foundry sand from proplasm after mechanized molding and pouring in the foundry.
惯性振动落砂机主要用于铸造车间机械化造型浇注后铸型的落砂。
Furthermore, a combined casting and rolling installation for carrying out the method is proposed.
此外,还提出用于执行所述方法的联合浇铸轧制设备。
Furthermore, a combined casting and rolling installation for carrying out the method is proposed.
此外,还提出用于执行所述方法的联合浇铸轧制设备。
应用推荐