The reaction mechanism and treatment effect of treating dyeing wastewater by activated carbon from straw by sulfuric acid adsorption - oxidation method are introduced.
介绍了硫酸活化秸杆炭黑制备活性秸杆炭素与化学氧化法结合处理印染废水的反应机理及处理效果。
Unshaped active carbon produced through water steaming method with qualified coal as raw material. The products of these are easy in reproduction and strong against pressing.
以优质煤为原料，用水蒸汽法生产的不定型活性炭，具有一定抗压强度，易再生。
Multi-walled carbon nanotubes are purified by an improved wet-chemical method.
采用改进的湿化学方法提纯多壁碳纳米管。
This paper deals with the application of microprocessor for gas carburizing to control carbon potential in order to improve the quality of products. Its principle and method are given.
本文论述了气体渗碳工艺中应用微机控制碳势的原理和方法。借此控制系统提高了渗碳件的质量。
The theory and experimental results for the formation of micro-spherical cluster of carbon atoms obtained by high Dynamic pressure method are described in this paper.
本文简要报导了采用二级轻气炮产生的动态超高压来合成微球形碳原子团簇的理论分析与初步实验结果。
The testing method and standardization of carbon fiber and its fabric, prepreg, CFRP are illustrated both at home and abroad, for some testing units reference.
论述了国内外碳纤维及其织物、预浸料、 复合材料的测试方法及标准化，供国内有关测试单位及专业技术人员参考。
The effects of the quality of pre-baked anode on the aluminum electrolysis production are described, and an effective method of reducing carbon deposits on the anode is proposed.
论述预焙阳极质量对铝电解生产的影响，提出减少阳极炭渣的有效方法。
With pretreatment by combustion method, the nickel amount supported in carbon steel nanotube is determined by dimethylglyoxime weight method and accurate and stable analysis results are obtained.
采用灼烧法预处理、 丁二酮肟重量分析法来测定载镍碳纳米管的载镍量，获得稳定而准确的分析结果。
The steel plate reinforced method and the carbon fiber reinforced method are usually adopted in concrete reinforced engineering.
在混凝土加固工程中通常采用钢板粘接加固法和碳纤维粘接加固法。
When there are both carbon dioxide and hydrocarbon in the different intervals in one well, it is better to use this method to determine the gas types.
当一口井的不同层位同时存在二氧化碳气和烃类气时，使用该方法来确定气体的类型，效果较好。
The method to solve furnace bottom rising and the factor affecting carbon content in FeSiAl alloy are emphatically expounded.
着重阐述了解决炉底上涨的方法和影响硅铝铁中碳含量的因素。
The technology development for carbon electrode and the method for testing the quality of carbon electrodes are discussed.
对炭电极技术开发及质量指标检测方法的改进进行了探讨；
Since carbon nanotubes (CNTs) have been discovered in 1991, they are mainly produced by arc-discharge evaporation and Chemical vapor Deposition (CVD) method.
纳米碳管自1991年被发现以来，目前主要的制备方法有电弧法和化学气相沉积(cvd)法。
This paper introduces a method of the recovery of zinc acetate from absorbent carbon of aging catalyst carrier, and researches are made on condition of extraction.
本文提出了从老化催化剂载体活性炭中回收醋酸锌的方法，并对提取条件进行了讨论。
In the present research, the activated carbon fiber-supported catalysts are mainly used in catalytic decomposition method and selective catalytic reduction (SCR) method.
在目前研究中，活性炭纤维基催化剂主要应用于催化分解法和选择性催化还原法(SCR)。
The reaction mechanism and treatment effect of treating dyeing wastewater by activated carbon adsorption-oxidation method are introduced in this paper.
介绍了活性炭吸附—化学氧化法处理印染废水的反应机理及处理效果。
Ammonia -active carbon technology is a good method to purify waste gas containing nitrogen oxides, the experimental method and the result are introduced simply.
氨—活性炭工艺是净化含氧化氮废气的良好方法，本文对实验方法及结果作了简要介绍。
Spheroidal graphite cast iron and graphite are chosen as raw material separately, ball milling method is used to fabricate carbon microspheres.
分别以球墨铸铁和石墨为原料，采用机械球磨法成功制备了碳微球。
A new method in which carbon monoxide and methane are directly converted to light hydrocarbons by microwave plasma 2.
一氧化碳和甲烷直接转化成低碳烃的一种新方法。
And consequently the rational catalyst and reactor design and the proper process control method are proposed, considering the differences in the growth of different nanometer carbon materials.
针对不同的碳纳米材料的生长特性提出了催化剂与反应器设计及过程控制的研究方向。
The optimal manufacturing process of PAC(powdered activated carbon) from sorghum shell dregs with phosphoric acid method by orthogonal design are investigated.
再以高梁壳渣为原料，磷酸法制取粉状活性炭，通过正交试验探索了最佳工艺条件。
In order to detect the carbide network in high carbon hypereutectoid steel wire rods accurately, two kinds of detection method of the carbide network are compared.
为了准确地检验高碳过共析钢盘条中的网状渗碳体，分别对选用硝酸酒精溶液侵蚀和碱性苦味酸钠水溶液热侵蚀两种显示方法进行了比较。
The critical micellar aggregation Numbers obtained by extrapolation method are half of the CTAB's (cetyltrimethylammonium bromide) which is hydrophobic with the same carbon number.
利用外推法得到的该表面活性剂临界胶束聚集数约为亲油基同碳数的CTAB临界胶束聚集数的一半。
Using zinc oxide and carbon powder as raw material, different shaped ZnO crystals are obtained in different area by the carbothermal reduction method.
以ZnO粉和石墨粉为原料，用碳热还原法获得了分区生长的多种形貌ZnO晶体。
The mix proportion and the measurement method of the carbon-fiber reinforced concrete are introduced in this paper.
粗骨料的引入使碳纤维混凝土力学和压敏性能较碳纤维水泥砂浆有较大的不同。
With pretreatment by combustion method, the nickel amount supported in carbon steel nanotube is determined by dimethylglyoxime weight method and accurate and stable analysis results are obtained.
采用灼烧法预处理、丁二酮肟重量分析法来测定载镍碳纳米管的载镍量，获得稳定而准确的分析结果。
In the method, other carbon sources are not introduced; thus, the structure and function of other thalli can be kept stably, operation is convenient, and thus quick start can be realized.
本发明提供的方法没有引入其他碳源，可以稳定地保持混合菌群的结构和功能，并且操作方便，可以快速启动。
Smoothing, dense and uniform nano crystalline diamond like carbon films are prepared by using electron cyclotron resonance (ECR) microwave acetone plasma chemical vapor deposition (CVD) method.
利用电子回旋共振（ECR）微波等离子体辅助化学气相沉积技术、工作气氛为丙酮，在光学玻璃衬底上得到了光滑、致密、均匀的类金刚石薄膜。
Combined with the present international and domestic carbon emission calculation method, two calculation methods suitable for China are put forward.
结合目前国际国内的碳排放计算方法，提出了适合我国高炉的两种计算方法。
Organizations can use the standardized method for calculation and emissions verification to ensure the measurement methods of 1 ton of carbon dioxide are the same anywhere in the world.
组织可以通过使用标准化的方法，计算和验证排放量数值，确保1吨二氧化碳的测量方式在全球任何地方都是一样的。
应用推荐