The mechanism of carbon anode consumption is introduced.
介绍了炭阳极消耗机理。
The carbon anode consumption was measured in laboratory aluminium electrolysis cells.
在实验室铝电解槽上研究了炭阳极消耗。
With the increase of carbon anode scale, the production process raises a higher request to automatic control.
随着炭阳极生产规模的不断扩大，对生产工艺自动化控制提出了更高的要求。
The effects of structure and physical properties on electrochemical characteristics of carbon anode were educed.
导出炭材料的结构与物理特性对炭材料的嵌锂性能的影响。
The wettability of three kinds of molten electrolyte on carbon anode and NiFe2O4-based cermet inert anode were investigated.
测试了熔融状态下三种不同组分的电解质对碳阳极和自制的镍铁尖晶石基金属陶瓷惰性阳极的润湿性。
Fine coke formula can enhance compactness of baked carbon anode and mechanical strength, which is in favor of formula process improvement.
细颗粒配方能增加炭素焙烧阳极致密性、利于提高其机械强度，对改进配方工艺具有积极意义。
The phenomenon that the crack defect at jaw hole during baking process of carbon anode vertically charged in baker causes the defective index of carbon anode rise.
在焙烧过程中，竖装阳极出现爪孔缺陷的现象是导致阳极生产废品率增多及成本居高不下的一个很重要原因。
Carbon anode quality for aluminium electrolysis pot With pre-baking anodes has important effect on technical and economic indexes in aluminium electrolysis production.
预焙阳极铝电解槽用炭素阳极的质量对铝电解生产的技术经济指标具有重要影响。
The cokes, graphites, nongraphitizable carbon, carbon fibers. mesocarbon. microbeads(MCMB)used as carbon anode materials for lithium ion secondary batteries ware presented.
介绍了焦炭、石墨、难石墨化碳及碳纤维、中间相微球等锂离子二次电池用碳负极材料的研究概况。
Selective oxidation of carbon anode in aluminum electrolysis caused by reactivity difference between pitch coke and petroleum coke is one of the main causes for excess carbon consumption.
铝电解生产中，碳素阳极两组分(石油焦和沥青结焦)的活性差异带来阳极的选择性氧化，是造成碳素阳极过量消耗的主要原因之一。
This coating not only can play a strong role on protecting carbon at different temperatures, but also increase the temperature point of initial acute oxidation on the carbon anode surface.
涂层不仅在不同的温度下都能对炭素阳极起到较强的保护作用，而且还能起到提高炭素阳极初始剧烈氧化温度点的作用。
The variation of the cooling temperature of the green carbon anode with the cooling time, the temperature of cooling water and the forming temperature has been studied by computing simulation.
通过数学模型描述炭阳极生坯冷却过程，研究炭阳极冷却温度与冷却时间、冷却水温及成型温度间的关系。
One of the electrodes, the cathode, is made of lithium cobalt oxide; the other, the anode, is composed of carbon.
电极的负极由锂钴氧化物制成；而另一极正极由碳制成。
It introduces the problems and its solution measures on producing medium carbon ferromanganese by means of anode slag.
介绍了精炼电炉在利用阳极渣进行中碳锰铁生产实践中出现的问题及解决办法。
Preferably the liquid anode comprises molten salt and a fuel, which preferably has a significant elemental carbon content.
优选液体阳极包括熔融盐和燃料， 优选含有相当多的元素碳。
The progress in research on anode materials for lithium_ion secondary batteries are reviewed. Anode materials of carbon, tin_based composite oxide are summarized.
综述了锂离子电池负极材料的研究进展，介绍了碳素材料、锡氧化物和锡基复合氧化物负极材料。
The effects of anode size and distance between the two electrodes in the cracking chamber on the uniformity of the carbon foils are determined.
研究了裂解室的阳极尺寸和阳、极之间的距离对裂解碳膜均匀性的影响。
A new material electric conducting magnesia carbon brick used for DC furnace bottom anode is briefly described.
主要介绍了DC炉底阳极的最新材料——导电镁碳砖。
Using electric conducting magnesia carbon brick as fuenace bottom anode has the features of erosion resistance and easy repair.
导电镁碳砖作底阳极具有耐侵蚀、易修补等特点。
Thereinto, the carbon saturated iron melt was used as anode and liquid silver as cathode.
其中碳饱和铁液作阳极，渣中的银液作阴极。
The effects of the quality of pre-baked anode on the aluminum electrolysis production are described, and an effective method of reducing carbon deposits on the anode is proposed.
论述预焙阳极质量对铝电解生产的影响，提出减少阳极炭渣的有效方法。
In the use of the anode carbon block cycle, as anode was consumed, lead anode carbon block anode institutions to drop, to guarantee the stability of cell pole pitch.
在阳极炭块的使用周期内，随着阳极被逐渐消耗，阳极机构带动阳极炭块下降，以保证电解槽稳定的极距。
The results show: the main factors affecting the quality of electrolyze aluminum anode carbon lump are roasting time, solution concentration and immersion time.
研究表明：影响阳极炭块优化处理质量的主要因素是焙烧时间、溶液浓度和浸渍时间。
The question of carbon balls in anode nozzle was one of the most serious problems during the deposition.
实验发现，等离子体炬阳极喷嘴积碳是沉积过程中最突出的问题之一。
Using the composite graphite rods with the sulphide of iron group metals as anode, the double-wall carbon nanotubes have been fabricated by arc discharging under hydrogen atmosphere.
用含有铁族金属硫化物的复合石墨棒作阳极，在氢气氛围下实施电弧放电，制备出了双壁纳米碳管。
Effects of the sample-anode distance(the interval between sample and anode) and effective emission area on the field emission characteristics of carbon nanotube films were discussed.
讨论了薄膜与阳极间隔以及有效发射面积对碳纳米管薄膜场发射性能的影响。
Ordered mesoporous carbon nanofibers were prepared by combining the soft template synthesis method of mesoporous carbons with the confinement of channels of anode alumina membranes.
本文利用介孔碳的软模板合成方法和阳极氧化铝膜的孔道限域性制备有序的介孔碳纳米纤维。
The inner anode includes insoluble carbon and phosphorous-copper bar.
内阳极有两种材质，分别为不溶性碳精棒和含磷铜棒。
The inner anode includes insoluble carbon and phosphorous-copper bar.
内阳极有两种材质，分别为不溶性碳精棒和含磷铜棒。
应用推荐